[comp.protocols.nfs] NCSA Telnet doesn't like PC-NFS

ce1zzes@prism.gatech.EDU (Eric Sheppard) (02/07/91)

I've gotten Sun's PC-NFS to work with the Clarkson packet driver. I have 
developed extreme disgust with Sun's Telnet and FTP, so I would like to
use NCSA's Telnet and FTP.  Unfortunately, Telnet and FTP won't work with
PC-NFS.  I get:

Packet Access Type Error 10
Can't access IP handle interface to type 1
Packet driver probably not loaded
Error code: -2

Telnet/FTP with the packet driver works very well when PC-NFS is not active. 
Are Telnet/FTP and PC-NFS doomed to be mutually exclusive?  Is it possible
to get them to cooperate?  If so, how?  I'm using a 3Com 3C503 card on a
286 machine.

Eric

link@dtoa3.dt.navy.mil (Link) (02/07/91)

In article <21377@hydra.gatech.EDU> ce1zzes@prism.gatech.EDU (Eric Sheppard) writes:
>I've gotten Sun's PC-NFS to work with the Clarkson packet driver. I have
>developed extreme disgust with Sun's Telnet and FTP, so I would like to
>use NCSA's Telnet and FTP.  Unfortunately, Telnet and FTP won't work with
>PC-NFS.  I get:
>
>Packet Access Type Error 10
>Can't access IP handle interface to type 1
>Packet driver probably not loaded
>Error code: -2
>
>Telnet/FTP with the packet driver works very well when PC-NFS is not active.
>Are Telnet/FTP and PC-NFS doomed to be mutually exclusive?  Is it possible
>to get them to cooperate?  If so, how?  I'm using a 3Com 3C503 card on a
>286 machine.
>
>Eric

Good News!

They are not mutually exclusive.  They can be made to cooperate. Here's
how:

You need to run a special version of NCSA telnet that has been modified
to run with PC-NFS.  It is available from the good folks at Clarkson
via anonymous ftp.  Start out in the directory /pub/cutcp and get the
appropriate readme files as well as pktd.sys.  You replace the SUN supplied
3com drivers in config.sys with pktd.sys.  This lets PC-NFS use packet
driver software.  You will have to consult the readme files for full
instructions, I believe the version you need is CUTE (Clarkson University
Terminal Emulator) CUTE Ver. 2.2TN/NFS-A.

I've had good luck with this on 286 machines with 3C503 cards.  Just
be careful if you try to run it on a 386 under Desqview/386.

RICK
Rick Link                     Internet: link@fracture.dt.navy.mil
David Taylor Research Center  Ma Bell:  (301)267-4335            
Annapolis, MD 21402-5067      Autovon:  281-4335