argv@island.uu.net (Dan Heller) (11/13/89)
Submitted-by: uunet!kddlab!isl.yamaha.co.jp!shutoh (Kazuhiko Shutoh)
Posting-number: Volume 5, Issue 25
Archive-name: xpclock/part01
Dear Dan Heller
Hello! Mr. Dan Heller.
I am creating xpclock, pendulum clock for X11.
Please examine it for distribute comp.sources.x.
PS. This program is heavy CPU eater :-) but ok?
Kazuhiko Shutoh
shutoh%isl.yamaha.co.jp%kddlab@uunet.uu.net
----- CUT HERE ----- CUT HERE ----- CUT HERE ----- CUT HERE ----- CUT HERE --
#! /bin/sh
# This is a shell archive. Remove anything before this line, then unpack
# it by saving it into a file and typing "sh file". To overwrite existing
# files, type "sh file -c". You can also feed this as standard input via
# unshar, or by typing "sh <file", e.g.. If this archive is complete, you
# will see the following message at the end:
# "End of shell archive."
# Contents: Imakefile Makefile.simple README xpclock.c xpclock.h
# xpclock.icon xpclock.man
# Wrapped by shutoh@shako on Sat Nov 11 16:54:26 1989
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
if test -f 'Imakefile' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'Imakefile'\"
else
echo shar: Extracting \"'Imakefile'\" \(813 characters\)
sed "s/^X//" >'Imakefile' <<'END_OF_FILE'
X# SCCS ID : @(#)Imakefile 1.5 11/11/89
X#
X# Imakefile - Imakefile for xpclock
X#
X# Author: Kazuhiko Shutoh, 1989.
X#
X# Permission to use, copy, modify and distribute without charge this
X# software, documentation, images, etc. is granted, provided that this
X# comment and the author's name is retained. The author assumes no
X# responsibility for lost sleep as a consequence of use of this software.
X#
X# Send any comments, bug reports, etc. to: shutoh@isl.yamaha.co.jp or,
X# for oversea: shutoh%isl.yamaha.co.jp%kddlab@uunet.uu.net
X#
X
X
X
XLOCAL_LIBRARIES = $(XAWLIB) $(XMULIB) $(XTOOLLIB) $(XLIB)
XSYS_LIBRARIES = -lm
X
XSRCS = xpclock.c xpclock.h xpclock.icon
XOBJS = xpclock.o
X
X#CC = gcc
XCC = cc
X
X#DEBUGFLAGS = -g
XCDEBUGFLAGS = -O
X
XComplexProgramTarget(xpclock)
X
X
X
END_OF_FILE
if test 813 -ne `wc -c <'Imakefile'`; then
echo shar: \"'Imakefile'\" unpacked with wrong size!
fi
# end of 'Imakefile'
fi
if test -f 'Makefile.simple' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'Makefile.simple'\"
else
echo shar: Extracting \"'Makefile.simple'\" \(868 characters\)
sed "s/^X//" >'Makefile.simple' <<'END_OF_FILE'
X# SCCS ID : @(#)Makefile.simple 1.3 11/1/89
X#
X# Makefile.simple - Simple Makefile for xpclock
X#
X# Author: Kazuhiko Shutoh, 1989.
X#
X# Permission to use, copy, modify and distribute without charge this
X# software, documentation, images, etc. is granted, provided that this
X# comment and the author's name is retained. The author assumes no
X# responsibility for lost sleep as a consequence of use of this software.
X#
X# Send any comments, bug reports, etc. to: shutoh@isl.yamaha.co.jp or,
X# for oversea: shutoh%isl.yamaha.co.jp%kddlab@uunet.uu.net
X#
X
X#
X# Libraries for X11R2
X#
X#LIBS = -lXaw -lXt -lX11 -lm
X#
X# Libraries for X11R3
X#
XLIBS = -lXaw -lXmu -lXt -lX11 -lm
X
Xxpclock: xpclock.o
X cc -o xpclock xpclock.o $(LIBS)
X
Xxpclock.o: xpclock.c xpclock.h xpclock.icon
X cc -c xpclock.c
X
X
X
X
END_OF_FILE
if test 868 -ne `wc -c <'Makefile.simple'`; then
echo shar: \"'Makefile.simple'\" unpacked with wrong size!
fi
# end of 'Makefile.simple'
fi
if test -f 'README' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'README'\"
else
echo shar: Extracting \"'README'\" \(1080 characters\)
sed "s/^X//" >'README' <<'END_OF_FILE'
XSCCS ID : @(#)README 1.1 11/11/89
X
X
X Xpclock - Pendulum clock for X11
X
X
X
XTo Install:
X
X if you have imake, make Makefile from Imakefile and just type, "make".
X or, simply type "make -f Makefile.simple"
X or, manual compile "cc -o xpclock xpclock.c -lXaw -lXmu -lXt -lX11 -lm"
X
XXpclock worked on:
X
X SUN SUN 3 Series
X SUN 3/60 + X640 X terminal
X SUN 4 Series
X
X SONY NEWS 3800 Series (R3000 RISC NEWS)
X NEWS 83* 84* (17**)
X
X ? Sequent Symmetry + NCD16 X terminal
X
X DEC DECStation 3100
X VAX 8350 Ultrix V2.3
X
X OMRON LUNA UNIOS-U(System V)
X
X
XCopyright notice and Author:
X
X Author: Kazuhiko Shutoh, 1989.
X
X Permission to use, copy, modify and distribute without charge this
X software, documentation, images, etc. is granted, provided that this
X comment and the author's name is retained. The author assumes no
X responsibility for lost sleep as a consequence of use of this software.
X
X Send any comments, bug reports, etc. to: shutoh@isl.yamaha.co.jp or,
X for oversea: shutoh%isl.yamaha.co.jp%kddlab@uunet.uu.net
X
X
Xenjoy!!!
X Kazuhiko Shutoh
X
X
X
END_OF_FILE
if test 1080 -ne `wc -c <'README'`; then
echo shar: \"'README'\" unpacked with wrong size!
fi
# end of 'README'
fi
if test -f 'xpclock.c' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'xpclock.c'\"
else
echo shar: Extracting \"'xpclock.c'\" \(9763 characters\)
sed "s/^X//" >'xpclock.c' <<'END_OF_FILE'
Xstatic char sccsid[] = "@(#)xpclock.c 1.7 11/1/89";
X/*
X * xpclock.c - Pendulum Clock for X11
X *
X * Author: Kazuhiko Shutoh, 1989.
X *
X * Permission to use, copy, modify and distribute without charge this software,
X * documentation, images, etc. is granted, provided that this comment and the
X * author's name is retained. The author assumes no responsibility for lost
X * sleep as a consequence of use of this software.
X *
X * Send any comments, bug reports, etc. to: shutoh@isl.yamaha.co.jp or, for
X * oversea: shutoh%isl.yamaha.co.jp%kddlab@uunet.uu.net
X *
X */
X
X#include <X11/Xos.h>
X#include <X11/Intrinsic.h>
X#include <X11/StringDefs.h>
X#include <X11/Shell.h>
X#include <X11/Form.h>
X#include <X11/Box.h>
X#include <X11/Clock.h>
X
X#include <stdio.h>
X#include <math.h>
X
X#include "xpclock.h"
X#include "xpclock.icon"
X
XXtTimerCallbackProc MovePendulum();
XXtCallbackProc RedrawPendulum();
Xvoid DrawPendulum();
XXtTimerCallbackProc DrawClockFace();
Xvoid DrawClockArc();
Xvoid ParseCommandLine();
Xvoid Usage();
X
XWidget toplevel, base, pclock, clock, pendulum;
XXPoint points[37];
XGC gcPendulum;
XGC gcClockface;
X
Xint pendulum_width, pendulum_height;
Xint pendulum_x = 0, pendulum_y = 0;
Xdouble pendulum_theta = 0;
Xint pendulum_vector = 2;
Xlong pendulum_update;
Xunsigned char pendulum_flag;
X
Xmain(argc, argv)
X int argc;
X char **argv;
X{
X
X Arg args[10];
X Cardinal i;
X XtTranslations newTranslations;
X static XtActionsRec redrawActions[] = {
X {"expose", (XtCallbackProc) RedrawPendulum},
X {"resize", (XtCallbackProc) RedrawPendulum}};
X
X static char *overrideTranslations =
X "<Expose>: expose() \n\
X <ResReq>: expose()";
X XGCValues gcv;
X
X toplevel = XtInitialize("xpclock", "XPclock", options, XtNumber(options), &argc, argv);
X
X /* Parse command line */
X
X ParseCommandLine(argc, argv);
X
X i = 0;
X XtSetArg(args[0], XtNiconPixmap,
X XCreateBitmapFromData(XtDisplay(toplevel),
X XtScreen(toplevel)->root, xpclock_icon_bits,
X xpclock_icon_width, xpclock_icon_height));
X i++;
X XtSetValues(toplevel, args, i);
X
X base = XtCreateManagedWidget("base", formWidgetClass,
X toplevel, NULL, 0);
X
X i = 0;
X XtSetArg(args[i], XtNborderWidth, 2); i++;
X pclock = XtCreateManagedWidget("pclock", formWidgetClass,
X base, args, i);
X
X i = 0;
X XtSetArg(args[i], XtNheight, 100); i++;
X XtSetArg(args[i], XtNwidth, 100); i++;
X XtSetArg(args[i], XtNborderWidth, 0); i++;
X clock = XtCreateManagedWidget("clock", clockWidgetClass,
X pclock, args, i);
X
X /* Get GC for clock face */
X
X XtSetArg(args[0], XtNforeground, 0);
X XtGetValues(clock, args, 1);
X
X gcv.foreground = args[0].value;
X gcClockface = XtGetGC(clock, GCForeground, &gcv);
X
X XtSetArg(args[0], XtNbackground, 0);
X XtGetValues(clock, args, 1);
X args[0].name = "foreground";
X XtSetValues(clock, args, 1);
X
X if (pendulum_flag == ON) {
X
X i = 0;
X XtSetArg(args[i], XtNheight, 100); i++;
X XtSetArg(args[i], XtNwidth, 100); i++;
X XtSetArg(args[i], XtNfromVert, clock); i++;
X pendulum = XtCreateManagedWidget("meter", boxWidgetClass,
X pclock, args, i);
X
X /* Get GC for Pendulum */
X
X XtSetArg(args[0], XtNbackground, 0);
X XtSetArg(args[1], XtNborderColor, 0);
X XtGetValues(pendulum, args, 2);
X
X gcv.foreground = args[0].value;
X gcv.background = args[0].value;
X gcv.function = GXinvert;
X gcPendulum = XtGetGC(pendulum, GCFunction, &gcv);
X
X }
X
X /* Override Expose / Resize Translation table */
X
X XtAddActions(redrawActions, XtNumber(redrawActions));
X newTranslations = XtParseTranslationTable(overrideTranslations);
X if (pendulum_flag == ON)
X XtOverrideTranslations(pendulum, newTranslations);
X XtOverrideTranslations(clock, newTranslations);
X
X /* Interval timer start */
X
X if (pendulum_flag == ON)
X XtAddTimeOut(pendulum_update, MovePendulum, NULL);
X XtAddTimeOut(CLOCKFACE_UPDATE, DrawClockFace, NULL);
X
X XtRealizeWidget(toplevel);
X XtMainLoop();
X
X}
X
XXtTimerCallbackProc
XMovePendulum(client_data, id)
X caddr_t client_data;
X XtIntervalId id;
X{
X
X
X Arg args[10];
X static double old_pendulum_theta;
X static int old_pendulum_x = 0;
X static int old_pendulum_y = 0;
X
X if ((pendulum_x != 0) && (pendulum_y != 0)) {
X old_pendulum_theta = pendulum_theta;
X old_pendulum_x = pendulum_x;
X old_pendulum_y = pendulum_y;
X }
X if ((pendulum_theta + pendulum_vector < 0) ||
X (pendulum_theta + pendulum_vector > 45))
X pendulum_vector = -pendulum_vector;
X
X pendulum_theta += (double) pendulum_vector;
X
X XtSetArg(args[0], XtNheight, 0);
X XtSetArg(args[1], XtNwidth, 0);
X XtGetValues(pendulum, args, 2);
X
X pendulum_height = args[0].value;
X pendulum_width = args[1].value;
X
X pendulum_x = (int) (sin((pendulum_theta - 22.5) * PI / 180.0)
X * pendulum_width * 0.7) + (pendulum_width / 2);
X pendulum_y = (int) (cos((pendulum_theta - 22.5) * PI / 180.0)
X * pendulum_height * 0.7);
X
X DrawPendulum(pendulum_x, pendulum_y, pendulum_theta);
X
X if ((old_pendulum_x != 0) && (old_pendulum_y != 0))
X DrawPendulum(old_pendulum_x, old_pendulum_y, old_pendulum_theta);
X
X XtAddTimeOut(pendulum_update, MovePendulum, NULL);
X
X}
X
X
XXtCallbackProc
XRedrawPendulum(w, event, params, nparams)
X Widget w;
X XEvent *event;
X String *params;
X Cardinal *nparams;
X{
X
X caddr_t dummy;
X XtIntervalId dummy_id;
X
X if (pendulum_flag == ON) {
X XClearWindow(XtDisplay(pendulum), XtWindow(pendulum));
X DrawPendulum(pendulum_x, pendulum_y, pendulum_theta);
X }
X
X DrawClockArc();
X DrawClockFace(dummy, dummy_id);
X
X}
X
X
Xvoid
XDrawPendulum(offset_x, offset_y, theta)
X int offset_x;
X int offset_y;
X double theta;
X{
X register double angle;
X register double rsize;
X register int count;
X register int pendulum_size;
X int arm_x, arm_y;
X register int shade_count;
X
X pendulum_size = (pendulum_width < pendulum_height) ? pendulum_width : pendulum_height;
X
X /* Pendulum */
X
X for (angle = 0, count = 0; angle <= 360; angle += 10, count++) {
X points[count].x = (short) (sin(angle * PI / 180.0)
X * (double) (pendulum_size * 0.15) + (double) offset_x);
X points[count].y = (short) (cos(angle * PI / 180.0)
X * (double) (pendulum_size * 0.15) + (double) offset_y);
X }
X
X XDrawLines(XtDisplay(pendulum), XtWindow(pendulum), gcPendulum,
X points, count, CoordModeOrigin);
X
X /* Shade */
X
X for (rsize = 0.04, shade_count = 0; shade_count < 3; shade_count++, rsize += 0.03) {
X for (angle = 0, count = 0; angle < 80; angle += 10, count++) {
X points[count].x = (short) (sin(angle * PI / 180.0)
X * (double) (pendulum_size * rsize) + (double) offset_x);
X points[count].y = (short) (cos(angle * PI / 180.0)
X * (double) (pendulum_size * rsize) + (double) offset_y);
X }
X XDrawLines(XtDisplay(pendulum), XtWindow(pendulum), gcPendulum,
X points, count, CoordModeOrigin);
X }
X
X /* Arm */
X
X arm_x = (short) (sin((157.5 + theta) * PI / 180.0)
X * (double) (pendulum_size * 0.15) + (double) offset_x);
X arm_y = (short) (cos((157.5 + theta) * PI / 180.0)
X * (double) (pendulum_size * 0.15) + (double) offset_y);
X
X XDrawLine(XtDisplay(pendulum), XtWindow(pendulum), gcPendulum,
X pendulum_width / 2, 0, arm_x, arm_y);
X
X}
X
X
XXtTimerCallbackProc
XDrawClockFace(client_data, id)
X caddr_t client_data;
X XtIntervalId id;
X{
X
X Arg args[10];
X double angle;
X int segment_count;
X int clock_height, clock_width;
X int number_count;
X int number_x, number_y;
X int number_height, number_width;
X
X
X XtSetArg(args[0], XtNheight, 0);
X XtSetArg(args[1], XtNwidth, 0);
X XtGetValues(clock, args, 2);
X clock_height = args[0].value;
X clock_width = args[1].value;
X number_height = clock_height * 0.04;
X number_width = clock_width * 0.04;
X
X for (angle = 150, number_count = 0; angle >= -180
X ; angle -= 30, number_count++) {
X number_x = sin(angle * PI / 180.0)
X * (clock_width / 2) * 0.8 + (clock_width / 2);
X number_y = cos(angle * PI / 180.0) * (clock_height / 2)
X * 0.8 + (clock_height / 2);
X
X for (segment_count = 0; segment_count < 5; segment_count++) {
X XDrawLine(XtDisplay(clock), XtWindow(clock), gcClockface,
X number_x + (int) ((num_segments[number_count].segment[segment_count].x1) * number_width) - number_width,
X number_y + (int) ((num_segments[number_count].segment[segment_count].y1) * number_height) - number_height,
X number_x + (int) ((num_segments[number_count].segment[segment_count].x2) * number_width) - number_width,
X number_y + (int) ((num_segments[number_count].segment[segment_count].y2) * number_height) - number_height);
X }
X }
X
X XtAddTimeOut(CLOCKFACE_UPDATE, DrawClockFace, NULL);
X
X}
X
Xvoid
XDrawClockArc()
X{
X
X Arg args[10];
X int clock_height, clock_width;
X
X XtSetArg(args[0], XtNheight, 0);
X XtSetArg(args[1], XtNwidth, 0);
X XtGetValues(clock, args, 2);
X clock_height = args[0].value;
X clock_width = args[1].value;
X
X XDrawArc(XtDisplay(clock), XtWindow(clock), gcClockface, 0, 0, clock_width - 1, clock_height - 1, 0, 23040);
X
X}
X
X
X
Xvoid
XParseCommandLine(ac, av)
X int ac;
X char **av;
X{
X
X int count;
X
X /* Setup default */
X
X pendulum_flag = ON;
X pendulum_update = 100;
X
X if (ac > 1)
X for (count = 1; count < ac; count++) {
X if ((strcmp("-pupdate", av[count]) == 0)
X && (count + 1 <= ac))
X pendulum_update = atol(av[++count]);
X else if ((strcmp("-nopendulum", av[count]) == 0)
X && (count + 1 <= ac)) {
X pendulum_flag = OFF;
X count++;
X } else
X Usage();
X }
X}
X
X
Xvoid
XUsage()
X{
X
X fprintf(stderr, "xpclock <Toolkit Options> [-pupdate millisecond] [-nopendulum]\n");
X
X exit(-1);
X
X}
END_OF_FILE
if test 9763 -ne `wc -c <'xpclock.c'`; then
echo shar: \"'xpclock.c'\" unpacked with wrong size!
fi
# end of 'xpclock.c'
fi
if test -f 'xpclock.h' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'xpclock.h'\"
else
echo shar: Extracting \"'xpclock.h'\" \(2714 characters\)
sed "s/^X//" >'xpclock.h' <<'END_OF_FILE'
X/*
X * SCCS ID : @(#)xpclock.h 1.2 11/1/89
X *
X * xpclock.h - Header for Pendulum Clock for X11
X *
X * Author: Kazuhiko Shutoh, 1989.
X *
X * Permission to use, copy, modify and distribute without charge this software,
X * documentation, images, etc. is granted, provided that this comment and the
X * author's name is retained. The author assumes no responsibility for lost
X * sleep as a consequence of use of this software.
X *
X * Send any comments, bug reports, etc. to: shutoh@isl.yamaha.co.jp or, for
X * oversea: shutoh%isl.yamaha.co.jp%kddlab@uunet.uu.net
X *
X */
X
X#define PI 3.141592654
X
X#define ON 1
X#define OFF 0
X
X#define CLOCKFACE_UPDATE 5000
X
X/* Number vector :-) fonts */
X
Xtypedef struct {
X double x1;
X double y1;
X double x2;
X double y2;
X} NumberSegment;
X
Xtypedef struct {
X NumberSegment segment[5];
X} NumberSegmentRec;
X
XNumberSegmentRec num_segments[12] = {
X {
X {0, 0, 0, 2}, /* 1 */
X {0, 0, 0, 0},
X {0, 0, 0, 0},
X {0, 0, 0, 0},
X {0, 0, 0, 0}
X },
X {
X {0, 0, 0, 2}, /* 2 */
X {1, 0, 1, 2},
X {0, 0, 0, 0},
X {0, 0, 0, 0},
X {0, 0, 0, 0}
X },
X {
X {0, 0, 0, 2}, /* 3 */
X {1, 0, 1, 2},
X {2, 0, 2, 2},
X {0, 0, 0, 0},
X {0, 0, 0, 0}
X },
X {
X {0, 0, 0, 2}, /* 4 */
X {1, 0, 1.5, 2},
X {1.5, 2, 2, 0},
X {0, 0, 0, 0},
X {0, 0, 0, 0}
X },
X {
X {0, 0, 0.5, 2}, /* 5 */
X {0.5, 2, 1, 0},
X {0, 0, 0, 0},
X {0, 0, 0, 0},
X {0, 0, 0, 0}
X },
X {
X {0, 0, 0.5, 2}, /* 6 */
X {0.5, 2, 1, 0},
X {2, 0, 2, 2},
X {0, 0, 0, 0},
X {0, 0, 0, 0}
X },
X {
X {0, 0, 0.5, 2}, /* 7 */
X {0.5, 2, 1, 0},
X {2, 0, 2, 2},
X {3, 0, 3, 2},
X {0, 0, 0, 0}
X },
X {
X {0, 0, 0.5, 2}, /* 8 */
X {0.5, 2, 1, 0},
X {2, 0, 2, 2},
X {3, 0, 3, 2},
X {4, 0, 4, 2}
X },
X {
X {0, 0, 0, 2}, /* 9 */
X {1, 0, 2, 2},
X {2, 0, 1, 2},
X {0, 0, 0, 0},
X {0, 0, 0, 0}
X },
X {
X {0, 0, 1, 2}, /* 10 */
X {0, 2, 1, 0},
X {0, 0, 0, 0},
X {0, 0, 0, 0},
X {0, 0, 0, 0}
X },
X {
X {0, 0, 1, 2}, /* 11 */
X {0, 2, 1, 0},
X {2, 0, 2, 2},
X {0, 0, 0, 0},
X {0, 0, 0, 0}
X },
X {
X {0, 0, 1, 2}, /* 12 */
X {0, 2, 1, 0},
X {2, 0, 2, 2},
X {3, 0, 3, 2},
X {0, 0, 0, 0}
X }
X};
X
X/* Resource for Clock Widget */
X
Xstatic XrmOptionDescRec options[] = {
X {"-chime", "*clock.chime", XrmoptionNoArg, "TRUE"},
X {"-hd", "*clock.hands", XrmoptionSepArg, NULL},
X {"-hands", "*clock.hands", XrmoptionSepArg, NULL},
X {"-hl", "*clock.highlight", XrmoptionSepArg, NULL},
X {"-highlight", "*clock.highlight", XrmoptionSepArg, NULL},
X {"-update", "*clock.update", XrmoptionSepArg, NULL},
X {"-padding", "*clock.padding", XrmoptionSepArg, NULL},
X {"-d", "*clock.analog", XrmoptionNoArg, "FALSE"},
X {"-digital", "*clock.analog", XrmoptionNoArg, "FALSE"},
X {"-analog", "*clock.analog", XrmoptionNoArg, "TRUE"},
X};
END_OF_FILE
if test 2714 -ne `wc -c <'xpclock.h'`; then
echo shar: \"'xpclock.h'\" unpacked with wrong size!
fi
# end of 'xpclock.h'
fi
if test -f 'xpclock.icon' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'xpclock.icon'\"
else
echo shar: Extracting \"'xpclock.icon'\" \(2003 characters\)
sed "s/^X//" >'xpclock.icon' <<'END_OF_FILE'
X/*
X* SCCS ID : @(#)xpclock.icon 1.1 10/25/89
X*
X* xpclock.icon - icon bitmap data for xpclock
X*
X* Author: Kazuhiko Shutoh, 1989.
X*
X* Permission to use, copy, modify and distribute without charge this
X* software, documentation, images, etc. is granted, provided that this
X* comment and the author's name is retained. The author assumes no
X* responsibility for lost sleep as a consequence of use of this software.
X*
X* Send any comments, bug reports, etc. to: shutoh@isl.yamaha.co.jp or,
X* for oversea: shutoh%isl.yamaha.co.jp%kddlab@uunet.uu.net
X*
X*/
X
X
X#define xpclock_icon_width 31
X#define xpclock_icon_height 52
Xstatic char xpclock_icon_bits[] = {
X 0xff, 0xff, 0xff, 0x7f, 0x01, 0x00, 0x00, 0x40, 0xfd, 0xff, 0xff, 0x5f,
X 0x05, 0x00, 0x00, 0x50, 0x05, 0x00, 0x00, 0x50, 0xfd, 0xff, 0xff, 0x5f,
X 0x09, 0x00, 0x00, 0x48, 0x09, 0xf0, 0x07, 0x48, 0x09, 0x0c, 0x18, 0x48,
X 0x09, 0x82, 0x20, 0x48, 0x09, 0x09, 0x48, 0x48, 0x89, 0x80, 0x80, 0x48,
X 0x49, 0x80, 0x00, 0x49, 0x49, 0x81, 0x40, 0x49, 0x29, 0x80, 0x00, 0x4a,
X 0x29, 0x80, 0x00, 0x4a, 0x29, 0x80, 0x00, 0x4a, 0xa9, 0xe0, 0xbf, 0x4a,
X 0x29, 0x80, 0x00, 0x4a, 0x29, 0x80, 0x00, 0x4a, 0x29, 0x00, 0x00, 0x4a,
X 0x49, 0x01, 0x40, 0x49, 0x49, 0x00, 0x00, 0x49, 0x89, 0x00, 0x80, 0x48,
X 0x09, 0x09, 0x48, 0x48, 0x09, 0x82, 0x20, 0x48, 0x09, 0x0c, 0x18, 0x48,
X 0x09, 0xf0, 0x07, 0x48, 0x09, 0x00, 0x00, 0x48, 0xe9, 0xff, 0xff, 0x4b,
X 0x29, 0xc0, 0x00, 0x4a, 0x29, 0x60, 0x00, 0x4a, 0x29, 0x20, 0x00, 0x4a,
X 0x29, 0x30, 0x00, 0x4a, 0x29, 0x10, 0x00, 0x4a, 0x29, 0x18, 0x00, 0x4a,
X 0x29, 0x0e, 0x00, 0x4a, 0x29, 0x11, 0x00, 0x4a, 0xa9, 0x20, 0x00, 0x4a,
X 0xa9, 0x20, 0x00, 0x4a, 0xa9, 0x20, 0x00, 0x4a, 0x29, 0x11, 0x00, 0x4a,
X 0x29, 0x0e, 0x00, 0x4a, 0x29, 0x00, 0x00, 0x4a, 0xe9, 0xff, 0xff, 0x4b,
X 0x09, 0x00, 0x00, 0x48, 0xfd, 0xff, 0xff, 0x5f, 0x05, 0x00, 0x00, 0x50,
X 0x05, 0x00, 0x00, 0x50, 0xfd, 0xff, 0xff, 0x5f, 0x01, 0x00, 0x00, 0x40,
X 0xff, 0xff, 0xff, 0x7f};
END_OF_FILE
if test 2003 -ne `wc -c <'xpclock.icon'`; then
echo shar: \"'xpclock.icon'\" unpacked with wrong size!
fi
# end of 'xpclock.icon'
fi
if test -f 'xpclock.man' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'xpclock.man'\"
else
echo shar: Extracting \"'xpclock.man'\" \(1857 characters\)
sed "s/^X//" >'xpclock.man' <<'END_OF_FILE'
X.TH XPCLOCK 1 "13 October 1988" "X Version 11"
X.SH NAME
Xxpclock - Pendulum clock for X
X.SH SYNOPSIS
X.B xpclock
X[-\fItoolkitoption\fP ...] [-xclock-option ...] [-pupdate milliseconds] [-nopendulum]
X.SH DESCRIPTION
XThe
X.I xpclock
Xprogram displays the animate pendulum and time in analog form. The time is continuously
Xupdated at a frequency which may be specified by the user. This program is
Xusing the Athena Clock widget.
X.SH OPTIONS
X.I Xpclock
Xaccepts all of the standard X Toolkit and Xclock command line options along with the
Xadditional options listed below:
X.TP 8
X.B \-pupdate <milliseconds>
XThis option indicates that set pendulum update timeout. The default is 100 milliseconds.
X.TP 8
X.B \-nopendulum
XThis option indicates that turn off pendulum.
X.SH X DEFAULTS
XThis program uses the
X.I Clock
Xwidget in the X Toolkit. It understands all of the core resource names and
Xclasses.
X.PP
X.SH "SEE ALSO"
XX(1), xclock(1), xrdb(1), time(3C), Athena Clock widget
X.SH BUGS
X.I Xpclock
Xbelieves the system clock.
X.PP
X.I Xpclock
Xis CPU eater. sorry.
X.PP
XDigital mode (-digital) does not work. sorry. (but why?)
X.SH "COPYRIGHT NOTICE"
X.PP
XPermission to use, copy, modify and distribute without charge this
Xsoftware, documentation, images, etc. is granted, provided that this
Xcomment and the author's name is retained. The author assumes no
Xresponsibility for lost sleep as a consequence of use of this software.
X.PP
XSend any comments, bug reports, etc. to: shutoh@isl.yamaha.co.jp or,
Xfor oversea: shutoh%isl.yamaha.co.jp%kddlab@uunet.uu.net
X.br
XSee \fIX(1)\fP for a full statement of rights and permissions.
X.SH AUTHORS
X
Xxclock :
X.br
XTony Della Fera (MIT-Athena, DEC)
X.br
XDave Mankins (MIT-Athena, BBN)
X.br
XEd Moy (UC Berkeley)
X.br
Xxpclock:
X.br
XKazuhiko Shutoh
Xshutoh@isl.yamaha.co.jp or,
Xfor oversea: shutoh%isl.yamaha.co.jp%kddlab@uunet.uu.net
X
END_OF_FILE
if test 1857 -ne `wc -c <'xpclock.man'`; then
echo shar: \"'xpclock.man'\" unpacked with wrong size!
fi
chmod +x 'xpclock.man'
# end of 'xpclock.man'
fi
echo shar: End of shell archive.
exit 0