dl2n+@andrew.cmu.edu (Daniel Edward Lovinger) (07/08/90)
Submitted-by: Daniel Edward Lovinger <dl2n+@andrew.cmu.edu> Posting-number: Volume 8, Issue 43 Archive-name: xlife/part07 #! /bin/sh # This is a shell archive. Remove anything before this line, then unpack # it by saving it into a file and typing "sh file". To overwrite existing # files, type "sh file -c". You can also feed this as standard input via # unshar, or by typing "sh <file", e.g.. If this archive is complete, you # will see the following message at the end: # "End of archive 7 (of 8)." # Contents: xlife-2.0/CHANGES xlife-2.0/TODO xlife-2.0/cursor_data.h # xlife-2.0/cursor_mask.h xlife-2.0/doc/nicerules # xlife-2.0/patchlevel.h xlife-2.0/patterns/2_ak47.life # xlife-2.0/patterns/ak47.life xlife-2.0/patterns/baker.life # xlife-2.0/patterns/beaconmaker.life # xlife-2.0/patterns/bigglider.life # xlife-2.0/patterns/blinkership.life # xlife-2.0/patterns/blinkership3.life # xlife-2.0/patterns/boatmaker.life xlife-2.0/patterns/centinal.life # xlife-2.0/patterns/citiesindust.life xlife-2.0/patterns/cmu.life # xlife-2.0/patterns/cmu2.life xlife-2.0/patterns/cmu3.life # xlife-2.0/patterns/cow.life xlife-2.0/patterns/fusebranch.life # xlife-2.0/patterns/fusecorner.life # xlife-2.0/patterns/fusehinge.life xlife-2.0/patterns/futility.life # xlife-2.0/patterns/gardenofeden.life # xlife-2.0/patterns/gliderbackcap.life # xlife-2.0/patterns/gliderforecap.life # xlife-2.0/patterns/gliderglidergun.life # xlife-2.0/patterns/glidergun.life # xlife-2.0/patterns/glidergun2.life # xlife-2.0/patterns/glidermesscap.life # xlife-2.0/patterns/gliders1_2.life # xlife-2.0/patterns/gliders2_2.life # xlife-2.0/patterns/glidersidecap.life # xlife-2.0/patterns/glidersparcap.life # xlife-2.0/patterns/gourmet.life # xlife-2.0/patterns/greymatter1.life # xlife-2.0/patterns/gunandeater.life # xlife-2.0/patterns/harvester.life # xlife-2.0/patterns/horizfuse.life xlife-2.0/patterns/line.life # xlife-2.0/patterns/longsnake.life # xlife-2.0/patterns/mediumfishgun2.life # xlife-2.0/patterns/oscillator6.life # xlife-2.0/patterns/p120glider.life xlife-2.0/patterns/p26.life # xlife-2.0/patterns/p28.life xlife-2.0/patterns/p47.life # xlife-2.0/patterns/p54shuttle.life xlife-2.0/patterns/p55.life # xlife-2.0/patterns/p66.life xlife-2.0/patterns/pifuse.life # xlife-2.0/patterns/piston2.life xlife-2.0/patterns/rake.life # xlife-2.0/patterns/rake3.life xlife-2.0/patterns/relay.life # xlife-2.0/patterns/schooloffish.life # xlife-2.0/patterns/sixgliders.life # xlife-2.0/patterns/slowship.life xlife-2.0/patterns/slowship2.life # xlife-2.0/patterns/slowship3.life # xlife-2.0/patterns/sparktopifuse.life # xlife-2.0/patterns/stargaterepeater.life # xlife-2.0/patterns/test.life xlife-2.0/patterns/testtube.life # xlife-2.0/patterns/thunderbirdfuse.life # xlife-2.0/patterns/washerwoman.life xlife-2.0/patterns/wave1.life # xlife-2.0/resize.c # Wrapped by dl2n@niobe.weh.andrew.cmu.edu on Mon Jul 2 22:48:14 1990 PATH=/bin:/usr/bin:/usr/ucb ; export PATH if test -f xlife-2.0/CHANGES -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/CHANGES\" else echo shar: Extracting \"xlife-2.0/CHANGES\" \(735 characters\) sed "s/^X//" >xlife-2.0/CHANGES <<'END_OF_xlife-2.0/CHANGES' XChanges from v 1.0 to 1.6 X X * accepts -geometry and -bw X * more save file formats. see lifeconv.c and X xlife.6 for the details. X * cursor relative loading X * cursor relative zoom/unzoom X * arrow keys work, along with a help key if you have one X * if for malevolent reasons your keypad is not returning numbers, X you can now use it for movement and centering of the image. X The Sun type-4 keyboard is such a beast. X * diagonal movement via 1357 X * with scale > 3, cells are drawn with a black border X X * FASTER! (at the expense of memory) X XChanges to 2.0 X X * testing, tweaking of 1.6 and realizing things had changed X enough to warrant a version bump. X * more patterns X X jon (jb7m+@andrew.cmu.edu) X dan (dl2n+@andrew.cmu.edu) END_OF_xlife-2.0/CHANGES if test 735 -ne `wc -c <xlife-2.0/CHANGES`; then echo shar: \"xlife-2.0/CHANGES\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/TODO -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/TODO\" else echo shar: Extracting \"xlife-2.0/TODO\" \(427 characters\) sed "s/^X//" >xlife-2.0/TODO <<'END_OF_xlife-2.0/TODO' XBox a region. X Rotate box X Flip box X Move box X Erase box X Save box to #P format X XRead different file formats (bitmap....) as new #-section types X XSee loaded image before placement, allows construction of objects. Actually Xthis would be implied by move box and erase box. X Xlifeconv should really be made more 'useful' and convert from other formats X(pbm, x bitmap, etc). X Xlifeconv should pass #O, #C, and others fields through. END_OF_xlife-2.0/TODO if test 427 -ne `wc -c <xlife-2.0/TODO`; then echo shar: \"xlife-2.0/TODO\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/cursor_data.h -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/cursor_data.h\" else echo shar: Extracting \"xlife-2.0/cursor_data.h\" \(1582 characters\) sed "s/^X//" >xlife-2.0/cursor_data.h <<'END_OF_xlife-2.0/cursor_data.h' X/* X * XLife Copyright 1989 Jon Bennett jb7m+@andrew.cmu.edu, jcrb@cs.cmu.edu X * X * Permission to use, copy, modify, distribute, and sell this software and its X * documentation for any purpose is hereby granted without fee, provided that X * the above copyright notice appear in all copies and that both that X * copyright notice and this permission notice appear in supporting X * documentation, and that the name of the copyright holders not be used in X * advertising or publicity pertaining to distribution of the software without X * specific, written prior permission. The copyright holders make no X * representations about the suitability of this software for any purpose. It X * is provided "as is" without express or implied warranty. X * X * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, X * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO X * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR X * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, X * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER X * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR X * PERFORMANCE OF THIS SOFTWARE. X */ X X#define cursor_data_width 16 X#define cursor_data_height 16 X#define cursor_data_x_hot 7 X#define cursor_data_y_hot 7 Xstatic char cursor_data_bits[] = { X 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, X 0x80, 0x00, 0xff, 0x7f, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, X 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00}; END_OF_xlife-2.0/cursor_data.h if test 1582 -ne `wc -c <xlife-2.0/cursor_data.h`; then echo shar: \"xlife-2.0/cursor_data.h\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/cursor_mask.h -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/cursor_mask.h\" else echo shar: Extracting \"xlife-2.0/cursor_mask.h\" \(1526 characters\) sed "s/^X//" >xlife-2.0/cursor_mask.h <<'END_OF_xlife-2.0/cursor_mask.h' X/* X * XLife Copyright 1989 Jon Bennett jb7m+@andrew.cmu.edu, jcrb@cs.cmu.edu X * X * Permission to use, copy, modify, distribute, and sell this software and its X * documentation for any purpose is hereby granted without fee, provided that X * the above copyright notice appear in all copies and that both that X * copyright notice and this permission notice appear in supporting X * documentation, and that the name of the copyright holders not be used in X * advertising or publicity pertaining to distribution of the software without X * specific, written prior permission. The copyright holders make no X * representations about the suitability of this software for any purpose. It X * is provided "as is" without express or implied warranty. X * X * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, X * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO X * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR X * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, X * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER X * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR X * PERFORMANCE OF THIS SOFTWARE. X */ X X#define cursor_mask_width 16 X#define cursor_mask_height 16 Xstatic char cursor_mask_bits[] = { X 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, X 0x80, 0x00, 0xff, 0x7f, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, X 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00}; END_OF_xlife-2.0/cursor_mask.h if test 1526 -ne `wc -c <xlife-2.0/cursor_mask.h`; then echo shar: \"xlife-2.0/cursor_mask.h\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/doc/nicerules -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/doc/nicerules\" else echo shar: Extracting \"xlife-2.0/doc/nicerules\" \(355 characters\) sed "s/^X//" >xlife-2.0/doc/nicerules <<'END_OF_xlife-2.0/doc/nicerules' X23/3 - the default, of course X34/34 X1234/3 - patterns "crystalize" X12345/45 - patterns become contained X12345/4 - same as above, but settles VERY quickly X5/12 - floor tile patterns... Variations of this X tend to be interesting as well. X/2 - most patterns expand indefinitely, X some interesting ones. Fast gliders. X X123456/3 X12345/3 X1245/3 END_OF_xlife-2.0/doc/nicerules if test 355 -ne `wc -c <xlife-2.0/doc/nicerules`; then echo shar: \"xlife-2.0/doc/nicerules\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patchlevel.h -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patchlevel.h\" else echo shar: Extracting \"xlife-2.0/patchlevel.h\" \(1271 characters\) sed "s/^X//" >xlife-2.0/patchlevel.h <<'END_OF_xlife-2.0/patchlevel.h' X/* X * XLife Copyright 1989 Jon Bennett jb7m+@andrew.cmu.edu, jcrb@cs.cmu.edu X * X * Permission to use, copy, modify, distribute, and sell this software and its X * documentation for any purpose is hereby granted without fee, provided that X * the above copyright notice appear in all copies and that both that X * copyright notice and this permission notice appear in supporting X * documentation, and that the name of the copyright holders not be used in X * advertising or publicity pertaining to distribution of the software without X * specific, written prior permission. The copyright holders make no X * representations about the suitability of this software for any purpose. It X * is provided "as is" without express or implied warranty. X * X * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, X * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO X * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR X * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, X * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER X * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR X * PERFORMANCE OF THIS SOFTWARE. X */ X Xstatic char *level="xlife patchlevel 7"; END_OF_xlife-2.0/patchlevel.h if test 1271 -ne `wc -c <xlife-2.0/patchlevel.h`; then echo shar: \"xlife-2.0/patchlevel.h\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/2_ak47.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/2_ak47.life\" else echo shar: Extracting \"xlife-2.0/patterns/2_ak47.life\" \(233 characters\) sed "s/^X//" >xlife-2.0/patterns/2_ak47.life <<'END_OF_xlife-2.0/patterns/2_ak47.life' X#P -7 -6 X.*****......... X*....*......... X.....*......... X*...*.......... X..*....*....... X.....*...*..... X..........*.... X.....*....*.... X......*****.... X............... X...........**.. X...........*... X............*** X..............* END_OF_xlife-2.0/patterns/2_ak47.life if test 233 -ne `wc -c <xlife-2.0/patterns/2_ak47.life`; then echo shar: \"xlife-2.0/patterns/2_ak47.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/ak47.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/ak47.life\" else echo shar: Extracting \"xlife-2.0/patterns/ak47.life\" \(322 characters\) sed "s/^X//" >xlife-2.0/patterns/ak47.life <<'END_OF_xlife-2.0/patterns/ak47.life' X#P -12 -5 X**....................... X**....................... X.......................** X.......................*. X...............***...*.*. X..............*...*..**.. X..**.........*.....*..... X.*.*.........*.....*..... X.*...........*.....*..... X**............*...*...... X...............***.....** X.......................** END_OF_xlife-2.0/patterns/ak47.life if test 322 -ne `wc -c <xlife-2.0/patterns/ak47.life`; then echo shar: \"xlife-2.0/patterns/ak47.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/baker.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/baker.life\" else echo shar: Extracting \"xlife-2.0/patterns/baker.life\" \(235 characters\) sed "s/^X//" >xlife-2.0/patterns/baker.life <<'END_OF_xlife-2.0/patterns/baker.life' X#R X 11 -11 X 10 -10 X 12 -10 X 9 -9 X 12 -9 X 8 -8 X 12 -8 X 13 -8 X 7 -7 X 6 -6 X 5 -5 X 4 -4 X 3 -3 X 2 -2 X 1 -1 X 0 0 X -1 1 X -2 2 X -3 3 X -4 4 X -5 5 X -6 6 X -7 7 X -8 8 X -9 9 X-12 10 X-11 10 X-10 10 X-11 11 END_OF_xlife-2.0/patterns/baker.life if test 235 -ne `wc -c <xlife-2.0/patterns/baker.life`; then echo shar: \"xlife-2.0/patterns/baker.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/beaconmaker.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/beaconmaker.life\" else echo shar: Extracting \"xlife-2.0/patterns/beaconmaker.life\" \(235 characters\) sed "s/^X//" >xlife-2.0/patterns/beaconmaker.life <<'END_OF_xlife-2.0/patterns/beaconmaker.life' X#R X 12 -12 X 13 -12 X 11 -11 X 13 -11 X 10 -10 X 9 -9 X 8 -8 X 7 -7 X 6 -6 X 5 -5 X 4 -4 X 3 -3 X 2 -2 X 1 -1 X 0 0 X -1 1 X -2 2 X -3 3 X -4 4 X -5 5 X -6 6 X -7 7 X -8 8 X -9 9 X-12 10 X-11 10 X-10 10 X-10 11 X-10 12 END_OF_xlife-2.0/patterns/beaconmaker.life if test 235 -ne `wc -c <xlife-2.0/patterns/beaconmaker.life`; then echo shar: \"xlife-2.0/patterns/beaconmaker.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/bigglider.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/bigglider.life\" else echo shar: Extracting \"xlife-2.0/patterns/bigglider.life\" \(351 characters\) sed "s/^X//" >xlife-2.0/patterns/bigglider.life <<'END_OF_xlife-2.0/patterns/bigglider.life' X#P -8 -8 X....*..*.......... X....***.*......... X...**............. X..*.**...*........ X****...**.*....... X.*.*...****....... X.*.......*........ X*...**....*.**.... X.*..**......*.*... X...*.**.........*. X....**.*.....*..*. X...............**. X.......**........* X.......*..*....*.* X........*.......** X...........*.*.... X.........***..*... X............***... END_OF_xlife-2.0/patterns/bigglider.life if test 351 -ne `wc -c <xlife-2.0/patterns/bigglider.life`; then echo shar: \"xlife-2.0/patterns/bigglider.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/blinkership.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/blinkership.life\" else echo shar: Extracting \"xlife-2.0/patterns/blinkership.life\" \(537 characters\) sed "s/^X//" >xlife-2.0/patterns/blinkership.life <<'END_OF_xlife-2.0/patterns/blinkership.life' X#P -14 -8 X..................*........... X...................*.......... X...............*...*.......... X................****......**.. X.........................****. X.........................**.** X................***.**.....**. X***....*.......**.....*....... X*.*....*......*.......**...... X***....*.......**.....*....... X................***.**.....**. X.........................**.** X.........................****. X................****......**.. X...............*...*.......... X...................*.......... X..................*........... END_OF_xlife-2.0/patterns/blinkership.life if test 537 -ne `wc -c <xlife-2.0/patterns/blinkership.life`; then echo shar: \"xlife-2.0/patterns/blinkership.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/blinkership3.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/blinkership3.life\" else echo shar: Extracting \"xlife-2.0/patterns/blinkership3.life\" \(247 characters\) sed "s/^X//" >xlife-2.0/patterns/blinkership3.life <<'END_OF_xlife-2.0/patterns/blinkership3.life' X#P -6 -8 X.****........ X*...*........ X....*........ X...*......... X.........**** X........*...* X............* X....**..*..*. X....***...... X....**..*..*. X............* X........*...* X.........**** X...*......... X....*........ X*...*........ X.****........ END_OF_xlife-2.0/patterns/blinkership3.life if test 247 -ne `wc -c <xlife-2.0/patterns/blinkership3.life`; then echo shar: \"xlife-2.0/patterns/blinkership3.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/boatmaker.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/boatmaker.life\" else echo shar: Extracting \"xlife-2.0/patterns/boatmaker.life\" \(259 characters\) sed "s/^X//" >xlife-2.0/patterns/boatmaker.life <<'END_OF_xlife-2.0/patterns/boatmaker.life' X#R X 12 -12 X 13 -12 X 11 -11 X 13 -11 X 10 -10 X 9 -9 X 8 -8 X 7 -7 X 6 -6 X 5 -5 X 4 -4 X 3 -3 X 2 -2 X 1 -1 X 0 0 X -1 1 X -2 2 X -3 3 X -4 4 X -5 5 X -6 6 X -7 7 X -8 8 X-13 9 X-12 9 X-11 9 X-10 9 X -9 9 X -9 10 X -9 11 X -9 12 X -9 13 END_OF_xlife-2.0/patterns/boatmaker.life if test 259 -ne `wc -c <xlife-2.0/patterns/boatmaker.life`; then echo shar: \"xlife-2.0/patterns/boatmaker.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/centinal.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/centinal.life\" else echo shar: Extracting \"xlife-2.0/patterns/centinal.life\" \(563 characters\) sed "s/^X//" >xlife-2.0/patterns/centinal.life <<'END_OF_xlife-2.0/patterns/centinal.life' X#R X-25 -8 X-24 -8 X 25 -8 X 26 -8 X-24 -7 X 25 -7 X-24 -6 X-22 -6 X 0 -6 X 1 -6 X 23 -6 X 25 -6 X-23 -5 X-22 -5 X -7 -5 X -6 -5 X 0 -5 X 1 -5 X 8 -5 X 23 -5 X 24 -5 X -7 -4 X -5 -4 X 7 -4 X 8 -4 X -5 -3 X 6 -3 X 7 -3 X -7 -2 X -6 -2 X -5 -2 X 7 -2 X 8 -2 X 11 -2 X 12 -2 X -7 2 X -6 2 X -5 2 X 7 2 X 8 2 X 11 2 X 12 2 X -5 3 X 6 3 X 7 3 X -7 4 X -5 4 X 7 4 X 8 4 X-23 5 X-22 5 X -7 5 X -6 5 X 0 5 X 1 5 X 8 5 X 23 5 X 24 5 X-24 6 X-22 6 X 0 6 X 1 6 X 23 6 X 25 6 X-24 7 X 25 7 X-25 8 X-24 8 X 25 8 X 26 8 END_OF_xlife-2.0/patterns/centinal.life if test 563 -ne `wc -c <xlife-2.0/patterns/centinal.life`; then echo shar: \"xlife-2.0/patterns/centinal.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/citiesindust.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/citiesindust.life\" else echo shar: Extracting \"xlife-2.0/patterns/citiesindust.life\" \(153 characters\) sed "s/^X//" >xlife-2.0/patterns/citiesindust.life <<'END_OF_xlife-2.0/patterns/citiesindust.life' X#P -8 -3 X..........*...... X..........*...... X....*...*.*.*.... X....*...*.*.*.... X..*.*.*.*.*.*.*.. X..*.*.*.*.*.*.*.. X*.*.*.*.*.*.*.*.* X*.*.*.*.*.*.*.*.* END_OF_xlife-2.0/patterns/citiesindust.life if test 153 -ne `wc -c <xlife-2.0/patterns/citiesindust.life`; then echo shar: \"xlife-2.0/patterns/citiesindust.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/cmu.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/cmu.life\" else echo shar: Extracting \"xlife-2.0/patterns/cmu.life\" \(249 characters\) sed "s/^X//" >xlife-2.0/patterns/cmu.life <<'END_OF_xlife-2.0/patterns/cmu.life' X#P -7 -7 X***..*.*.*..*** X*.*..*.*.*....* X*.*..*****..*** X............... X............... X***.........*** X..*.........*.. X***.........*** X..*.........*.. X***.........*** X............... X............... X***..*****..*.* X*....*.*.*..*.* X***..*.*.*..*** END_OF_xlife-2.0/patterns/cmu.life if test 249 -ne `wc -c <xlife-2.0/patterns/cmu.life`; then echo shar: \"xlife-2.0/patterns/cmu.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/cmu2.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/cmu2.life\" else echo shar: Extracting \"xlife-2.0/patterns/cmu2.life\" \(315 characters\) sed "s/^X//" >xlife-2.0/patterns/cmu2.life <<'END_OF_xlife-2.0/patterns/cmu2.life' X#P -8 -8 X****..*.*.*..**** X*..*..*.*.*.....* X*..*..*.*.*.....* X*..*..*****..**** X................. X................. X****.........**** X...*.........*... X****.........**** X...*.........*... X****.........**** X................. X................. X****..*****..*..* X*.....*.*.*..*..* X*.....*.*.*..*..* X****..*.*.*..**** END_OF_xlife-2.0/patterns/cmu2.life if test 315 -ne `wc -c <xlife-2.0/patterns/cmu2.life`; then echo shar: \"xlife-2.0/patterns/cmu2.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/cmu3.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/cmu3.life\" else echo shar: Extracting \"xlife-2.0/patterns/cmu3.life\" \(389 characters\) sed "s/^X//" >xlife-2.0/patterns/cmu3.life <<'END_OF_xlife-2.0/patterns/cmu3.life' X#P -9 -9 X*****..*.*.*..***** X*...*..*.*.*......* X*...*..*.*.*......* X*...*..*.*.*......* X*...*..*****..***** X................... X................... X*****.........***** X....*.........*.... X*****.........***** X....*.........*.... X*****.........***** X................... X................... X*****..*****..*...* X*......*.*.*..*...* X*......*.*.*..*...* X*......*.*.*..*...* X*****..*.*.*..***** END_OF_xlife-2.0/patterns/cmu3.life if test 389 -ne `wc -c <xlife-2.0/patterns/cmu3.life`; then echo shar: \"xlife-2.0/patterns/cmu3.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/cow.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/cow.life\" else echo shar: Extracting \"xlife-2.0/patterns/cow.life\" \(591 characters\) sed "s/^X//" >xlife-2.0/patterns/cow.life <<'END_OF_xlife-2.0/patterns/cow.life' X#P -40 -3 X**.......**..**..**..**..**..**..**..**..**..**..**..**..**..**..**..**..**..*.... X**....*.***..**..**..**..**..**..**..**..**..**..**..**..**..**..**..**..**..***.. X....**.*........................................................................*. X....**..************************************************************************.* X....**.*........................................................................*. X**....*.***..**..**..**..**..**..**..**..**..**..**..**..**..**..**..**..**..***.. X**.......**..**..**..**..**..**..**..**..**..**..**..**..**..**..**..**..**..*.... END_OF_xlife-2.0/patterns/cow.life if test 591 -ne `wc -c <xlife-2.0/patterns/cow.life`; then echo shar: \"xlife-2.0/patterns/cow.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/fusebranch.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/fusebranch.life\" else echo shar: Extracting \"xlife-2.0/patterns/fusebranch.life\" \(379 characters\) sed "s/^X//" >xlife-2.0/patterns/fusebranch.life <<'END_OF_xlife-2.0/patterns/fusebranch.life' X#R X-13 -12 X-12 -11 X-11 -10 X-10 -9 X -9 -8 X -8 -7 X 11 -7 X -7 -6 X 10 -6 X 12 -6 X -6 -5 X 9 -5 X 12 -5 X -5 -4 X 8 -4 X 12 -4 X 13 -4 X -4 -3 X 7 -3 X -3 -2 X 6 -2 X -2 -1 X 5 -1 X -1 0 X 5 0 X 6 0 X 0 1 X 3 1 X 4 1 X 1 2 X 4 2 X 2 3 X 3 3 X 2 5 X 3 5 X 2 6 X 3 7 X 4 8 X 5 9 X 6 10 X 10 10 X 11 10 X 7 11 X 10 11 X 8 12 X 10 12 X 9 13 END_OF_xlife-2.0/patterns/fusebranch.life if test 379 -ne `wc -c <xlife-2.0/patterns/fusebranch.life`; then echo shar: \"xlife-2.0/patterns/fusebranch.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/fusecorner.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/fusecorner.life\" else echo shar: Extracting \"xlife-2.0/patterns/fusecorner.life\" \(435 characters\) sed "s/^X//" >xlife-2.0/patterns/fusecorner.life <<'END_OF_xlife-2.0/patterns/fusecorner.life' X#R X 15 -8 X 15 -7 X 16 -7 X 17 -7 X-17 -6 X 18 -6 X-16 -5 X 17 -5 X-15 -4 X 16 -4 X-14 -3 X 15 -3 X-13 -2 X 14 -2 X-12 -1 X 13 -1 X-11 0 X 12 0 X-10 1 X 11 1 X -9 2 X 10 2 X -8 3 X -2 3 X -1 3 X 2 3 X 3 3 X 9 3 X -7 4 X -2 4 X 3 4 X 8 4 X -6 5 X -1 5 X 2 5 X 7 5 X -5 6 X -2 6 X -1 6 X 2 6 X 3 6 X 6 6 X -4 7 X 5 7 X -3 8 X -2 8 X -1 8 X 0 8 X 1 8 X 2 8 X 3 8 X 4 8 X -1 9 X 2 9 END_OF_xlife-2.0/patterns/fusecorner.life if test 435 -ne `wc -c <xlife-2.0/patterns/fusecorner.life`; then echo shar: \"xlife-2.0/patterns/fusecorner.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/fusehinge.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/fusehinge.life\" else echo shar: Extracting \"xlife-2.0/patterns/fusehinge.life\" \(211 characters\) sed "s/^X//" >xlife-2.0/patterns/fusehinge.life <<'END_OF_xlife-2.0/patterns/fusehinge.life' X#R X-10 -6 X -9 -5 X -8 -4 X -7 -3 X -6 -2 X -5 -1 X -4 0 X -3 1 X -2 2 X -1 3 X 5 3 X 0 4 X 4 4 X 6 4 X 10 4 X 11 4 X 1 5 X 4 5 X 7 5 X 10 5 X 2 6 X 4 6 X 8 6 X 10 6 X 3 7 X 9 7 END_OF_xlife-2.0/patterns/fusehinge.life if test 211 -ne `wc -c <xlife-2.0/patterns/fusehinge.life`; then echo shar: \"xlife-2.0/patterns/fusehinge.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/futility.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/futility.life\" else echo shar: Extracting \"xlife-2.0/patterns/futility.life\" \(859 characters\) sed "s/^X//" >xlife-2.0/patterns/futility.life <<'END_OF_xlife-2.0/patterns/futility.life' X#R X -4 -16 X -7 -15 X -6 -15 X -5 -15 X -4 -15 X 1 -15 X-16 -14 X -8 -14 X -7 -14 X -6 -14 X -5 -14 X 1 -14 X-17 -13 X-15 -13 X -8 -13 X -5 -13 X 5 -13 X 6 -13 X-18 -12 X-14 -12 X-13 -12 X -8 -12 X -7 -12 X -6 -12 X -5 -12 X 5 -12 X 6 -12 X-29 -11 X-28 -11 X-18 -11 X-14 -11 X-13 -11 X -7 -11 X -6 -11 X -5 -11 X -4 -11 X-29 -10 X-28 -10 X-18 -10 X-14 -10 X-13 -10 X -4 -10 X-17 -9 X-15 -9 X-16 -8 X -7 -7 X -5 -7 X -6 -6 X -5 -6 X -6 -5 X -2 -3 X -1 -3 X -3 -2 X 0 -2 X -3 -1 X -1 -1 X -2 0 X 7 6 X 6 7 X 7 7 X 6 8 X 8 8 X 17 9 X 16 10 X 18 10 X 5 11 X 14 11 X 15 11 X 19 11 X 29 11 X 30 11 X 5 12 X 6 12 X 7 12 X 8 12 X 14 12 X 15 12 X 19 12 X 29 12 X 30 12 X -5 13 X -4 13 X 6 13 X 7 13 X 8 13 X 9 13 X 14 13 X 15 13 X 19 13 X -5 14 X -4 14 X 6 14 X 9 14 X 16 14 X 18 14 X 0 15 X 6 15 X 7 15 X 8 15 X 9 15 X 17 15 X 0 16 X 5 16 X 6 16 X 7 16 X 8 16 X 5 17 END_OF_xlife-2.0/patterns/futility.life if test 859 -ne `wc -c <xlife-2.0/patterns/futility.life`; then echo shar: \"xlife-2.0/patterns/futility.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/gardenofeden.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/gardenofeden.life\" else echo shar: Extracting \"xlife-2.0/patterns/gardenofeden.life\" \(316 characters\) sed "s/^X//" >xlife-2.0/patterns/gardenofeden.life <<'END_OF_xlife-2.0/patterns/gardenofeden.life' X#P -16 -4 X********************************* X**.*.***.***.**.*.*.*.*.*.*.*.*.* X*.*.***.***.****.***.*.*.*.*.*.*. X*****.***.***.****.************** X*.*.**.***.***.*.***.*.*.*.*.*.*. X****.***.***.*****.**.*.*.*.*.*.* X.**.***.***.***.*.*.************* X**.**.***.***.**.****.*.*.*.*.*.* X******************.************** END_OF_xlife-2.0/patterns/gardenofeden.life if test 316 -ne `wc -c <xlife-2.0/patterns/gardenofeden.life`; then echo shar: \"xlife-2.0/patterns/gardenofeden.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/gliderbackcap.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/gliderbackcap.life\" else echo shar: Extracting \"xlife-2.0/patterns/gliderbackcap.life\" \(195 characters\) sed "s/^X//" >xlife-2.0/patterns/gliderbackcap.life <<'END_OF_xlife-2.0/patterns/gliderbackcap.life' X#R X -9 -6 X -8 -5 X -7 -4 X -6 -3 X -5 -2 X -4 -1 X -3 0 X -2 1 X -1 2 X 0 3 X 1 4 X 5 4 X 6 4 X 2 5 X 5 5 X 7 5 X 9 5 X 10 5 X 3 6 X 5 6 X 7 6 X 8 6 X 10 6 X 4 7 END_OF_xlife-2.0/patterns/gliderbackcap.life if test 195 -ne `wc -c <xlife-2.0/patterns/gliderbackcap.life`; then echo shar: \"xlife-2.0/patterns/gliderbackcap.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/gliderforecap.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/gliderforecap.life\" else echo shar: Extracting \"xlife-2.0/patterns/gliderforecap.life\" \(235 characters\) sed "s/^X//" >xlife-2.0/patterns/gliderforecap.life <<'END_OF_xlife-2.0/patterns/gliderforecap.life' X#R X -9 -8 X -8 -7 X -7 -6 X -6 -5 X -5 -4 X -4 -3 X -3 -2 X -2 -1 X -1 0 X 0 1 X 1 2 X 2 3 X 3 4 X 4 5 X -1 6 X 0 6 X 5 6 X -1 7 X 1 7 X 3 7 X 5 7 X 9 7 X 2 8 X 3 8 X 5 8 X 6 8 X 8 8 X 10 8 X 9 9 END_OF_xlife-2.0/patterns/gliderforecap.life if test 235 -ne `wc -c <xlife-2.0/patterns/gliderforecap.life`; then echo shar: \"xlife-2.0/patterns/gliderforecap.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/gliderglidergun.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/gliderglidergun.life\" else echo shar: Extracting \"xlife-2.0/patterns/gliderglidergun.life\" \(523 characters\) sed "s/^X//" >xlife-2.0/patterns/gliderglidergun.life <<'END_OF_xlife-2.0/patterns/gliderglidergun.life' X#R X 14 -12 X 14 -11 X 16 -11 X-20 -10 X 2 -10 X 4 -10 X 14 -10 X 15 -10 X-20 -9 X-18 -9 X 2 -9 X 3 -9 X-20 -8 X-19 -8 X-12 -8 X-10 -8 X 3 -8 X-12 -7 X-11 -7 X-11 -6 X 16 -4 X 17 -4 X 18 -4 X 16 -3 X-18 -2 X-17 -2 X-16 -2 X 3 -2 X 4 -2 X 17 -2 X-18 -1 X 3 -1 X 5 -1 X 9 -1 X-17 0 X-11 0 X-10 0 X 3 0 X 8 0 X 9 0 X-11 1 X -9 1 X -5 1 X 8 1 X 10 1 X-11 2 X -6 2 X -5 2 X 0 2 X 1 2 X -6 3 X -4 3 X 0 3 X 2 3 X 0 4 X 19 5 X 20 5 X 19 6 X 21 6 X 19 7 X 8 10 X 9 10 X 10 10 X 8 11 X 9 12 END_OF_xlife-2.0/patterns/gliderglidergun.life if test 523 -ne `wc -c <xlife-2.0/patterns/gliderglidergun.life`; then echo shar: \"xlife-2.0/patterns/gliderglidergun.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/glidergun.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidergun.life\" else echo shar: Extracting \"xlife-2.0/patterns/glidergun.life\" \(454 characters\) sed "s/^X//" >xlife-2.0/patterns/glidergun.life <<'END_OF_xlife-2.0/patterns/glidergun.life' X#P -17 -5 X.........................*.......... X......................****....*..... X.............*.......****.....*..... X............*.*......*..*.........** X...........*...**....****.........** X**.........*...**.....****.......... X**.........*...**........*.......... X............*.*..................... X.............*...................... X......................*.*........... X.......................**........... X.......................*............ END_OF_xlife-2.0/patterns/glidergun.life if test 454 -ne `wc -c <xlife-2.0/patterns/glidergun.life`; then echo shar: \"xlife-2.0/patterns/glidergun.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/glidergun2.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidergun2.life\" else echo shar: Extracting \"xlife-2.0/patterns/glidergun2.life\" \(1201 characters\) sed "s/^X//" >xlife-2.0/patterns/glidergun2.life <<'END_OF_xlife-2.0/patterns/glidergun2.life' X#P -16 -16 X**..............***............... X**............*...*............... X.............*....*............... X.............*...*................ X.................................. X.............*...*.............**. X.............*....*............**. X**............*...*............... X**..............***............... X.................................. X.................................. X.................................. X.................................. X.................................. X.........................*.....*.. X........................***...***. X.......................**.*...*.** X.................................. X.................................. X..........................*...*... X..........................*...*... X.................................. X.................................. X.................................. X.................................. X.................................. X.................................. X.................................. X.................................. X.................................. X.................................. X.................................. X........................**.....**. X........................**.....**. END_OF_xlife-2.0/patterns/glidergun2.life if test 1201 -ne `wc -c <xlife-2.0/patterns/glidergun2.life`; then echo shar: \"xlife-2.0/patterns/glidergun2.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/glidermesscap.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidermesscap.life\" else echo shar: Extracting \"xlife-2.0/patterns/glidermesscap.life\" \(203 characters\) sed "s/^X//" >xlife-2.0/patterns/glidermesscap.life <<'END_OF_xlife-2.0/patterns/glidermesscap.life' X#R X-10 -6 X -9 -5 X -8 -4 X -7 -3 X -6 -2 X -5 -1 X -4 0 X -3 1 X -2 2 X -1 3 X 0 4 X 4 4 X 5 4 X 9 4 X 10 4 X 1 5 X 4 5 X 6 5 X 8 5 X 10 5 X 2 6 X 4 6 X 6 6 X 7 6 X 3 7 END_OF_xlife-2.0/patterns/glidermesscap.life if test 203 -ne `wc -c <xlife-2.0/patterns/glidermesscap.life`; then echo shar: \"xlife-2.0/patterns/glidermesscap.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/gliders1_2.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/gliders1_2.life\" else echo shar: Extracting \"xlife-2.0/patterns/gliders1_2.life\" \(1187 characters\) sed "s/^X//" >xlife-2.0/patterns/gliders1_2.life <<'END_OF_xlife-2.0/patterns/gliders1_2.life' X#R X-16 -19 X-15 -19 X 11 -19 X-15 -18 X 10 -18 X 12 -18 X-15 -17 X-13 -17 X -7 -17 X -6 -17 X 10 -17 X 11 -17 X 13 -17 X-14 -16 X-13 -16 X -7 -16 X -5 -16 X 10 -16 X 11 -16 X 13 -16 X 14 -16 X 18 -16 X 19 -16 X-19 -15 X -4 -15 X 10 -15 X 11 -15 X 13 -15 X 18 -15 X 19 -15 X-19 -14 X-18 -14 X-17 -14 X -7 -14 X -4 -14 X 10 -14 X 12 -14 X-16 -13 X -4 -13 X 5 -13 X 11 -13 X-17 -12 X-16 -12 X -7 -12 X -5 -12 X 3 -12 X 5 -12 X -7 -11 X -6 -11 X 4 -11 X 5 -11 X-14 -7 X 20 -7 X-15 -6 X-14 -6 X-13 -6 X 12 -6 X 18 -6 X 19 -6 X 20 -6 X-16 -5 X-15 -5 X-14 -5 X-13 -5 X-12 -5 X 13 -5 X 17 -5 X-17 -4 X-15 -4 X-13 -4 X-11 -4 X 11 -4 X 12 -4 X 13 -4 X 17 -4 X 18 -4 X-17 -3 X-16 -3 X-12 -3 X-11 -3 X -2 -3 X -2 -2 X -1 -2 X 14 -2 X -3 -1 X -1 -1 X 14 -1 X-14 0 X 15 0 X-15 1 X-13 1 X-16 2 X-15 2 X-13 2 X-16 3 X-15 3 X-14 3 X 7 3 X 12 3 X 13 3 X 17 3 X 18 3 X-17 4 X-14 4 X 5 4 X 6 4 X 12 4 X 18 4 X-17 5 X-16 5 X-15 5 X 6 5 X 7 5 X-18 6 X-14 6 X 13 6 X 17 6 X-19 7 X-13 7 X 14 7 X 15 7 X 16 7 X-18 8 X-14 8 X -8 8 X-17 9 X-16 9 X-15 9 X -7 9 X -9 10 X -8 10 X -7 10 X 12 12 X 13 12 X 13 13 X 10 14 X 11 14 X 12 14 X 10 15 X -8 18 X-16 19 X-15 19 X-10 19 X -9 19 X-16 20 X-15 20 X -9 20 X -8 20 END_OF_xlife-2.0/patterns/gliders1_2.life if test 1187 -ne `wc -c <xlife-2.0/patterns/gliders1_2.life`; then echo shar: \"xlife-2.0/patterns/gliders1_2.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/gliders2_2.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/gliders2_2.life\" else echo shar: Extracting \"xlife-2.0/patterns/gliders2_2.life\" \(1219 characters\) sed "s/^X//" >xlife-2.0/patterns/gliders2_2.life <<'END_OF_xlife-2.0/patterns/gliders2_2.life' X#R X 1 -31 X 2 -31 X 8 -31 X 9 -31 X 1 -30 X 2 -30 X 8 -30 X 9 -30 X-30 -29 X-29 -29 X-23 -29 X-22 -29 X-30 -28 X-29 -28 X-23 -28 X-22 -28 X 3 -18 X 4 -18 X 6 -18 X 7 -18 X 3 -17 X 4 -17 X 6 -17 X 7 -17 X 3 -16 X 4 -16 X 6 -16 X 7 -16 X 1 -15 X 3 -15 X 4 -15 X 6 -15 X 7 -15 X 9 -15 X 1 -14 X 2 -14 X 3 -14 X 7 -14 X 8 -14 X 9 -14 X 2 -13 X 8 -13 X-31 -12 X-30 -12 X-28 -12 X-24 -12 X-22 -12 X-21 -12 X-31 -11 X-28 -11 X-24 -11 X-21 -11 X-30 -10 X-29 -10 X-28 -10 X-24 -10 X-23 -10 X-22 -10 X 17 -7 X 21 -7 X 16 -6 X 22 -6 X 32 -6 X 33 -6 X-15 -5 X 16 -5 X 32 -5 X 33 -5 X-16 -4 X-15 -4 X 1 -4 X 2 -4 X 16 -4 X 17 -4 X 21 -4 X-17 -3 X-16 -3 X 1 -3 X 2 -3 X 18 -3 X 19 -3 X 20 -3 X-30 -2 X-29 -2 X-16 -2 X-15 -2 X-12 -2 X-11 -2 X-30 -1 X-29 -1 X 18 -1 X 19 -1 X 20 -1 X 16 0 X 17 0 X 21 0 X 16 1 X 32 1 X 33 1 X-16 2 X-15 2 X-12 2 X-11 2 X 16 2 X 22 2 X 32 2 X 33 2 X-33 3 X-32 3 X-17 3 X-16 3 X 1 3 X 2 3 X 17 3 X 21 3 X-32 4 X-16 4 X-15 4 X 1 4 X 2 4 X-32 5 X-30 5 X-15 5 X-31 6 X-30 6 X 4 7 X 6 7 X 4 8 X 5 8 X-27 9 X 5 9 X-28 10 X-28 11 X-27 11 X-26 11 X -6 18 X -8 19 X -7 19 X -7 20 X -6 20 X-11 21 X-10 22 X-12 23 X-11 23 X-10 23 X -8 28 X -7 28 X -8 29 X -7 30 X -6 30 X -5 30 X -5 31 END_OF_xlife-2.0/patterns/gliders2_2.life if test 1219 -ne `wc -c <xlife-2.0/patterns/gliders2_2.life`; then echo shar: \"xlife-2.0/patterns/gliders2_2.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/glidersidecap.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidersidecap.life\" else echo shar: Extracting \"xlife-2.0/patterns/glidersidecap.life\" \(219 characters\) sed "s/^X//" >xlife-2.0/patterns/glidersidecap.life <<'END_OF_xlife-2.0/patterns/glidersidecap.life' X#R X -9 -8 X -8 -7 X -7 -6 X -6 -5 X -5 -4 X -4 -3 X -3 -2 X -2 -1 X -1 0 X 0 1 X 1 2 X 2 3 X 3 4 X 7 4 X 8 4 X 4 5 X 7 5 X 9 5 X 5 6 X 7 6 X 9 6 X 3 7 X 5 7 X 7 7 X 8 7 X 3 8 X 4 8 END_OF_xlife-2.0/patterns/glidersidecap.life if test 219 -ne `wc -c <xlife-2.0/patterns/glidersidecap.life`; then echo shar: \"xlife-2.0/patterns/glidersidecap.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/glidersparcap.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidersparcap.life\" else echo shar: Extracting \"xlife-2.0/patterns/glidersparcap.life\" \(299 characters\) sed "s/^X//" >xlife-2.0/patterns/glidersparcap.life <<'END_OF_xlife-2.0/patterns/glidersparcap.life' X#R X 14 -9 X 15 -9 X 15 -8 X 14 -7 X 13 -6 X 12 -5 X 11 -4 X-14 -3 X 10 -3 X-13 -2 X 9 -2 X-12 -1 X 8 -1 X-11 0 X 7 0 X-10 1 X 6 1 X -9 2 X 5 2 X -8 3 X 4 3 X -7 4 X 3 4 X -6 5 X 3 5 X 4 5 X -5 6 X 1 6 X 2 6 X -4 7 X 0 7 X 2 7 X -3 8 X 0 8 X -2 9 X 0 9 X -1 10 END_OF_xlife-2.0/patterns/glidersparcap.life if test 299 -ne `wc -c <xlife-2.0/patterns/glidersparcap.life`; then echo shar: \"xlife-2.0/patterns/glidersparcap.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/gourmet.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/gourmet.life\" else echo shar: Extracting \"xlife-2.0/patterns/gourmet.life\" \(429 characters\) sed "s/^X//" >xlife-2.0/patterns/gourmet.life <<'END_OF_xlife-2.0/patterns/gourmet.life' X#P -9 -9 X..........**........ X..........*......... X..*.**.**.*.....**.. X..**.*.*.*......*... X........*........*.. X................**.. X.................... X................**.. X*.........***..*.*.. X***.......*.*...*... X...*......*.*....*** X..*.*..............* X..**................ X.................... X..**................ X..*........*........ X...*......*.*.*.**.. X..**.....*.**.**.*.. X.........*.......... X........**.......... END_OF_xlife-2.0/patterns/gourmet.life if test 429 -ne `wc -c <xlife-2.0/patterns/gourmet.life`; then echo shar: \"xlife-2.0/patterns/gourmet.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/greymatter1.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/greymatter1.life\" else echo shar: Extracting \"xlife-2.0/patterns/greymatter1.life\" \(661 characters\) sed "s/^X//" >xlife-2.0/patterns/greymatter1.life <<'END_OF_xlife-2.0/patterns/greymatter1.life' X#P -11 -12 X.....**.**...**......... X....*.*.*.*.*.*......... X...*...*..*.*.*.**...... X..*.......**..*.*.*..... X..**..........*.*.*..... X....*..........*..*.*... X*****.............**.*.. X*....................*.. X.**..................**. X...*...................* X.***.................**. X*...................*... X.*...................**. X**....................*. X.....**..............*.. X......*..............**. X.....*.................* X.....****..........****. X........*..........*.... X.......*............*... X........***...**...**... X..........*...*.*.*..... X...........**.*.*.*..... X............*.*..*...... X............*.*......... X.............*.......... END_OF_xlife-2.0/patterns/greymatter1.life if test 661 -ne `wc -c <xlife-2.0/patterns/greymatter1.life`; then echo shar: \"xlife-2.0/patterns/greymatter1.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/gunandeater.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/gunandeater.life\" else echo shar: Extracting \"xlife-2.0/patterns/gunandeater.life\" \(443 characters\) sed "s/^X//" >xlife-2.0/patterns/gunandeater.life <<'END_OF_xlife-2.0/patterns/gunandeater.life' X#R X 8 -10 X 5 -9 X 6 -9 X 7 -9 X 8 -9 X -4 -8 X 4 -8 X 5 -8 X 6 -8 X 7 -8 X -5 -7 X -3 -7 X 4 -7 X 7 -7 X 17 -7 X 18 -7 X -6 -6 X -2 -6 X -1 -6 X 4 -6 X 5 -6 X 6 -6 X 7 -6 X 17 -6 X 18 -6 X-17 -5 X-16 -5 X -6 -5 X -2 -5 X -1 -5 X 5 -5 X 6 -5 X 7 -5 X 8 -5 X-17 -4 X-16 -4 X -6 -4 X -2 -4 X -1 -4 X 8 -4 X -5 -3 X -3 -3 X -4 -2 X 5 -1 X 7 -1 X 6 0 X 7 0 X 6 1 X 13 7 X 14 7 X 13 8 X 14 9 X 15 9 X 16 9 X 16 10 END_OF_xlife-2.0/patterns/gunandeater.life if test 443 -ne `wc -c <xlife-2.0/patterns/gunandeater.life`; then echo shar: \"xlife-2.0/patterns/gunandeater.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/harvester.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/harvester.life\" else echo shar: Extracting \"xlife-2.0/patterns/harvester.life\" \(275 characters\) sed "s/^X//" >xlife-2.0/patterns/harvester.life <<'END_OF_xlife-2.0/patterns/harvester.life' X#R X 12 -11 X 13 -11 X 11 -10 X 13 -10 X 10 -9 X 9 -8 X 8 -7 X 7 -6 X 6 -5 X 5 -4 X 4 -3 X 3 -2 X 2 -1 X 1 0 X 0 1 X -1 2 X -2 3 X -3 4 X -4 5 X -5 6 X -6 7 X -7 8 X-12 9 X-11 9 X-10 9 X -9 9 X -8 9 X-12 10 X-11 10 X-10 10 X -9 10 X-12 11 X-10 11 X -9 11 END_OF_xlife-2.0/patterns/harvester.life if test 275 -ne `wc -c <xlife-2.0/patterns/harvester.life`; then echo shar: \"xlife-2.0/patterns/harvester.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/horizfuse.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/horizfuse.life\" else echo shar: Extracting \"xlife-2.0/patterns/horizfuse.life\" \(768 characters\) sed "s/^X//" >xlife-2.0/patterns/horizfuse.life <<'END_OF_xlife-2.0/patterns/horizfuse.life' X#A X110 59 X110 60 X103 59 X104 59 X106 59 X107 59 X109 59 X102 60 X104 60 X105 60 X107 60 X108 60 X94 59 X95 59 X97 59 X98 59 X100 59 X101 59 X95 60 X96 60 X98 60 X99 60 X101 60 X86 59 X88 59 X89 59 X91 59 X92 59 X86 60 X87 60 X89 60 X90 60 X92 60 X93 60 X79 59 X80 59 X82 59 X83 59 X85 59 X78 60 X80 60 X81 60 X83 60 X84 60 X70 59 X71 59 X73 59 X74 59 X76 59 X77 59 X71 60 X72 60 X74 60 X75 60 X77 60 X62 59 X64 59 X65 59 X67 59 X68 59 X62 60 X63 60 X65 60 X66 60 X68 60 X69 60 X55 59 X56 59 X58 59 X59 59 X61 59 X54 60 X56 60 X57 60 X59 60 X60 60 X46 59 X47 59 X49 59 X50 59 X52 59 X53 59 X47 60 X48 60 X50 60 X51 60 X53 60 X38 59 X40 59 X41 59 X43 59 X44 59 X38 60 X39 60 X41 60 X42 60 X44 60 X45 60 X31 59 X32 59 X34 59 X35 59 X37 59 X30 60 X32 60 X33 60 X35 60 X36 60 X22 59 X23 59 X25 59 X26 59 X28 59 X29 59 X23 60 X24 60 X26 60 X27 60 X29 60 X19 59 X20 59 X17 60 X18 60 X20 60 X21 60 END_OF_xlife-2.0/patterns/horizfuse.life if test 768 -ne `wc -c <xlife-2.0/patterns/horizfuse.life`; then echo shar: \"xlife-2.0/patterns/horizfuse.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/line.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/line.life\" else echo shar: Extracting \"xlife-2.0/patterns/line.life\" \(773 characters\) sed "s/^X//" >xlife-2.0/patterns/line.life <<'END_OF_xlife-2.0/patterns/line.life' X#P -380 0 X****************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************** ************************************************************************************************************************************************************************************************************************************************************ END_OF_xlife-2.0/patterns/line.life if test 773 -ne `wc -c <xlife-2.0/patterns/line.life`; then echo shar: \"xlife-2.0/patterns/line.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/longsnake.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/longsnake.life\" else echo shar: Extracting \"xlife-2.0/patterns/longsnake.life\" \(963 characters\) sed "s/^X//" >xlife-2.0/patterns/longsnake.life <<'END_OF_xlife-2.0/patterns/longsnake.life' X#R X-27 -28 X-10 -28 X -8 -28 X-26 -27 X-25 -27 X-10 -27 X -9 -27 X-27 -26 X-26 -26 X -9 -26 X-14 -24 X-12 -24 X -4 -24 X-14 -23 X-13 -23 X -6 -23 X -5 -23 X-13 -22 X -5 -22 X -4 -22 X-14 -20 X-13 -20 X-12 -20 X -2 -20 X 0 -20 X-12 -19 X -2 -19 X -1 -19 X-13 -18 X -1 -18 X -6 -16 X -4 -16 X 4 -16 X -6 -15 X -5 -15 X 2 -15 X 3 -15 X -5 -14 X 3 -14 X 4 -14 X -6 -12 X -5 -12 X -4 -12 X 6 -12 X 8 -12 X -4 -11 X 6 -11 X 7 -11 X-28 -10 X-27 -10 X-26 -10 X -5 -10 X 7 -10 X-26 -9 X-27 -8 X 2 -8 X 4 -8 X 12 -8 X 2 -7 X 3 -7 X 10 -7 X 11 -7 X 3 -6 X 11 -6 X 12 -6 X 2 -4 X 3 -4 X 4 -4 X 14 -4 X 16 -4 X 4 -3 X 14 -3 X 15 -3 X 3 -2 X 15 -2 X 10 0 X 12 0 X 20 0 X 10 1 X 11 1 X 18 1 X 19 1 X 11 2 X 19 2 X 20 2 X 10 4 X 11 4 X 12 4 X 22 4 X 24 4 X 12 5 X 22 5 X 23 5 X 11 6 X 23 6 X 18 8 X 20 8 X 28 8 X 18 9 X 19 9 X 26 9 X 27 9 X 19 10 X 27 10 X 28 10 X 18 12 X 19 12 X 20 12 X 20 13 X 19 14 X 27 25 X 9 26 X 10 26 X 26 26 X 27 26 X 8 27 X 10 27 X 26 27 X 28 27 X 10 28 END_OF_xlife-2.0/patterns/longsnake.life if test 963 -ne `wc -c <xlife-2.0/patterns/longsnake.life`; then echo shar: \"xlife-2.0/patterns/longsnake.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/mediumfishgun2.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/mediumfishgun2.life\" else echo shar: Extracting \"xlife-2.0/patterns/mediumfishgun2.life\" \(955 characters\) sed "s/^X//" >xlife-2.0/patterns/mediumfishgun2.life <<'END_OF_xlife-2.0/patterns/mediumfishgun2.life' X#A X312 195 X313 195 X312 196 X313 197 X314 197 X315 197 X315 198 X324 192 X334 184 X335 184 X326 184 X326 190 X325 184 X324 185 X325 185 X324 189 X325 189 X325 190 X324 191 X325 191 X296 184 X296 185 X297 186 X297 188 X296 189 X296 190 X296 191 X297 191 X298 191 X286 184 X287 184 X334 183 X335 183 X296 183 X297 183 X298 183 X324 182 X324 183 X325 183 X288 177 X289 177 X288 178 X289 178 X286 183 X287 183 X302 168 X301 168 X300 169 X301 169 X300 167 X288 162 X289 162 X290 162 X287 163 X288 163 X289 163 X286 164 X287 164 X288 164 X289 164 X291 164 X286 165 X289 165 X290 165 X287 166 X288 166 X289 166 X288 167 X280 162 X281 162 X282 162 X281 163 X282 163 X283 163 X279 164 X281 164 X282 164 X283 164 X284 164 X280 165 X281 165 X284 165 X281 166 X282 166 X283 166 X282 167 X288 156 X290 156 X289 157 X290 157 X289 158 X294 144 X294 145 X286 144 X287 144 X289 144 X290 144 X291 145 X292 145 X292 146 X282 144 X282 145 X284 145 X285 145 X284 146 X286 142 X290 142 X291 142 X292 142 X287 143 X289 143 X293 143 X284 142 X285 142 X283 143 X291 130 X292 130 X291 131 X292 131 END_OF_xlife-2.0/patterns/mediumfishgun2.life if test 955 -ne `wc -c <xlife-2.0/patterns/mediumfishgun2.life`; then echo shar: \"xlife-2.0/patterns/mediumfishgun2.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/oscillator6.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/oscillator6.life\" else echo shar: Extracting \"xlife-2.0/patterns/oscillator6.life\" \(192 characters\) sed "s/^X//" >xlife-2.0/patterns/oscillator6.life <<'END_OF_xlife-2.0/patterns/oscillator6.life' X*................* X***............*** X...*..........*... X..*...........**.. X..*..*..***....... X.....*..******.... X...*.*.....**.*... X..*.*........*.*.. X..*............*.. X.**............**. X X END_OF_xlife-2.0/patterns/oscillator6.life if test 192 -ne `wc -c <xlife-2.0/patterns/oscillator6.life`; then echo shar: \"xlife-2.0/patterns/oscillator6.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/p120glider.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/p120glider.life\" else echo shar: Extracting \"xlife-2.0/patterns/p120glider.life\" \(734 characters\) sed "s/^X//" >xlife-2.0/patterns/p120glider.life <<'END_OF_xlife-2.0/patterns/p120glider.life' X#R X-113 -4 X114 -4 X-116 -3 X-115 -3 X-114 -3 X-113 -3 X114 -3 X115 -3 X116 -3 X117 -3 X-125 -2 X-117 -2 X-116 -2 X-115 -2 X-114 -2 X115 -2 X116 -2 X117 -2 X118 -2 X126 -2 X-126 -1 X-124 -1 X-117 -1 X-114 -1 X-104 -1 X-103 -1 X104 -1 X105 -1 X115 -1 X118 -1 X125 -1 X127 -1 X-127 0 X-123 0 X-122 0 X-117 0 X-116 0 X-115 0 X-114 0 X-104 0 X-103 0 X104 0 X105 0 X115 0 X116 0 X117 0 X118 0 X123 0 X124 0 X128 0 X-138 1 X-137 1 X-127 1 X-123 1 X-122 1 X-116 1 X-115 1 X-114 1 X-113 1 X114 1 X115 1 X116 1 X117 1 X123 1 X124 1 X128 1 X138 1 X139 1 X-138 2 X-137 2 X-127 2 X-123 2 X-122 2 X-113 2 X114 2 X123 2 X124 2 X128 2 X138 2 X139 2 X-126 3 X-124 3 X125 3 X127 3 X-125 4 X126 4 END_OF_xlife-2.0/patterns/p120glider.life if test 734 -ne `wc -c <xlife-2.0/patterns/p120glider.life`; then echo shar: \"xlife-2.0/patterns/p120glider.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/p26.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/p26.life\" else echo shar: Extracting \"xlife-2.0/patterns/p26.life\" \(1571 characters\) sed "s/^X//" >xlife-2.0/patterns/p26.life <<'END_OF_xlife-2.0/patterns/p26.life' X#P -19 -19 X.................*...*................. X................**...**................ X...........**...*.....*...**........... X...........*...............*........... X........**.*...............*.**........ X.......*.*.**.............**.*.*....... X.......*.*...................*.*....... X.....**..*...................*..**..... X....*....**.................**....*.... X....*****.......*.....*.......*****.... X........*......***...***......*........ X..****...........................****.. X..*..*...........................*..*.. X....................................... X................**...**................ X..........*......*...*......*.......... X.**......**...*.........*...**......**. X**........*...**.......**...*........** X....................................... X....................................... X....................................... X**........*...**.......**...*........** X.**......**...*.........*...**......**. X..........*......*...*......*.......... X................**...**................ X....................................... X..*..*...........................*..*.. X..****...........................****.. X........*......***...***......*........ X....*****.......*.....*.......*****.... X....*....**.................**....*.... X.....**..*...................*..**..... X.......*.*...................*.*....... X.......*.*.**.............**.*.*....... X........**.*...............*.**........ X...........*...............*........... X...........**...*.....*...**........... X................**...**................ X.................*...*................. END_OF_xlife-2.0/patterns/p26.life if test 1571 -ne `wc -c <xlife-2.0/patterns/p26.life`; then echo shar: \"xlife-2.0/patterns/p26.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/p28.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/p28.life\" else echo shar: Extracting \"xlife-2.0/patterns/p28.life\" \(346 characters\) sed "s/^X//" >xlife-2.0/patterns/p28.life <<'END_OF_xlife-2.0/patterns/p28.life' X#P -11 -6 X..*.*.............*.*.. X.....*...........*..... X.*..*.............*..*. X*.*.*.............*.*.* X*..*...............*..* X.**....***...***....**. X........*.....*........ X....................... X.**.................**. X*..*...............*..* X*.*..*...........*..*.* X.*...................*. X..**.*...........*.**.. X....*.............*.... END_OF_xlife-2.0/patterns/p28.life if test 346 -ne `wc -c <xlife-2.0/patterns/p28.life`; then echo shar: \"xlife-2.0/patterns/p28.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/p47.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/p47.life\" else echo shar: Extracting \"xlife-2.0/patterns/p47.life\" \(707 characters\) sed "s/^X//" >xlife-2.0/patterns/p47.life <<'END_OF_xlife-2.0/patterns/p47.life' X#R X -4 -14 X 4 -14 X -5 -13 X -3 -13 X 3 -13 X 5 -13 X-15 -12 X-14 -12 X -4 -12 X 4 -12 X 14 -12 X 15 -12 X-14 -11 X 14 -11 X-14 -10 X-12 -10 X 12 -10 X 14 -10 X-13 -9 X-12 -9 X 12 -9 X 13 -9 X -3 -8 X 3 -8 X-10 -7 X -9 -7 X -8 -7 X -4 -7 X -3 -7 X -2 -7 X 2 -7 X 3 -7 X 4 -7 X 8 -7 X 9 -7 X 10 -7 X -6 -4 X 6 -4 X -6 -3 X 6 -3 X -8 0 X -7 0 X 7 0 X 8 0 X -8 1 X -7 1 X 7 1 X 8 1 X -6 4 X 6 4 X -6 5 X 6 5 X-10 8 X -9 8 X -8 8 X -4 8 X -3 8 X -2 8 X 2 8 X 3 8 X 4 8 X 8 8 X 9 8 X 10 8 X -3 9 X 3 9 X-13 10 X-12 10 X 12 10 X 13 10 X-14 11 X-12 11 X 12 11 X 14 11 X-14 12 X 14 12 X-15 13 X-14 13 X -4 13 X 4 13 X 14 13 X 15 13 X -5 14 X -3 14 X 3 14 X 5 14 X -4 15 X 4 15 END_OF_xlife-2.0/patterns/p47.life if test 707 -ne `wc -c <xlife-2.0/patterns/p47.life`; then echo shar: \"xlife-2.0/patterns/p47.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/p54shuttle.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/p54shuttle.life\" else echo shar: Extracting \"xlife-2.0/patterns/p54shuttle.life\" \(387 characters\) sed "s/^X//" >xlife-2.0/patterns/p54shuttle.life <<'END_OF_xlife-2.0/patterns/p54shuttle.life' X#R X-14 -8 X-13 -8 X 13 -8 X 14 -8 X-13 -7 X 13 -7 X-13 -6 X-11 -6 X 11 -6 X 13 -6 X-12 -5 X-11 -5 X -1 -5 X 11 -5 X 12 -5 X 0 -4 X -6 -3 X -5 -3 X 1 -3 X -6 -2 X -5 -2 X -2 -2 X 0 -2 X -1 -1 X -1 1 X -6 2 X -5 2 X -2 2 X 0 2 X -6 3 X -5 3 X 1 3 X 0 4 X-12 5 X-11 5 X -1 5 X 11 5 X 12 5 X-13 6 X-11 6 X 11 6 X 13 6 X-13 7 X 13 7 X-14 8 X-13 8 X 13 8 X 14 8 END_OF_xlife-2.0/patterns/p54shuttle.life if test 387 -ne `wc -c <xlife-2.0/patterns/p54shuttle.life`; then echo shar: \"xlife-2.0/patterns/p54shuttle.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/p55.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/p55.life\" else echo shar: Extracting \"xlife-2.0/patterns/p55.life\" \(1199 characters\) sed "s/^X//" >xlife-2.0/patterns/p55.life <<'END_OF_xlife-2.0/patterns/p55.life' X#P -21 -13 X........*.........................*........ X.......*.*.......................*.*....... X........*.........................*........ X.............*...............*............. X......*****..***...........***..*****...... X.....*....*.....*.........*.....*....*..... X....*..*.......**.........**.......*..*.... X.*..*.**...........................**.*..*. X*.*.*.....*.....................*.....*.*.* X.*..*....*.*...................*.*....*..*. X....**..*..*......*.....*......*..*..**.... X.........**......***...***......**......... X........................................... X........................................... X........................................... X.........**.....................**......... X....**..*..*...................*..*..**.... X.*..*....*.*...................*.*....*..*. X*.*.*.....*.....................*.....*.*.* X.*..*.**...........................**.*..*. X....*..*...........................*..*.... X.....*....*...**...........**...*....*..... X......*****....*...........*....*****...... X.............*.*.*.......*.*.*............. X........*...*.*.**.......**.*.*...*........ X.......*.*..*.*.............*.*..*.*....... X........*....**.............**....*........ END_OF_xlife-2.0/patterns/p55.life if test 1199 -ne `wc -c <xlife-2.0/patterns/p55.life`; then echo shar: \"xlife-2.0/patterns/p55.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/p66.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/p66.life\" else echo shar: Extracting \"xlife-2.0/patterns/p66.life\" \(1067 characters\) sed "s/^X//" >xlife-2.0/patterns/p66.life <<'END_OF_xlife-2.0/patterns/p66.life' X#P -15 -15 X.....................*..*....... X.........*...........*.......... X........*.*.........*....*...... X.........*.........*.*..**...... X.................**.*........... X.......*****.................... X......*....*.................... X.....*..*........*..*........**. X..*..*.**..........**........**. X.*.*.*.....*.................**. X..*..*....*.*.................*. X.....**..*..*................*.* X..........**............***.*.*. X........................****.*.. X............................*... X................................ X.....................*.*........ X....*..*..............**........ X....*.................*......... X...*....*....................... X..*.*..**............**......... X**.*............*...*..*..**.... X.................**.*.*....*..*. X................**...*.....*.*.* X*..*........**..........**.*..*. X..**........**..........*..*.... X............**.......*....*..... X.............*.......*****...... X............*.*................. X.......***.*.*.........*........ X.......****.*.........*.*....... X...........*...........*........ END_OF_xlife-2.0/patterns/p66.life if test 1067 -ne `wc -c <xlife-2.0/patterns/p66.life`; then echo shar: \"xlife-2.0/patterns/p66.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/pifuse.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/pifuse.life\" else echo shar: Extracting \"xlife-2.0/patterns/pifuse.life\" \(507 characters\) sed "s/^X//" >xlife-2.0/patterns/pifuse.life <<'END_OF_xlife-2.0/patterns/pifuse.life' X#R X-12 -27 X-11 -27 X 11 -27 X 12 -27 X-12 -26 X-11 -26 X 11 -26 X 12 -26 X-12 -18 X-11 -18 X 11 -18 X 12 -18 X-12 -17 X-11 -17 X 11 -17 X 12 -17 X-12 -9 X-11 -9 X 11 -9 X 12 -9 X-12 -8 X-11 -8 X 11 -8 X 12 -8 X-12 0 X-11 0 X 11 0 X 12 0 X-12 1 X-11 1 X 11 1 X 12 1 X-12 9 X-11 9 X 11 9 X 12 9 X-12 10 X-11 10 X 11 10 X 12 10 X-12 18 X-11 18 X 11 18 X 12 18 X-12 19 X-11 19 X 11 19 X 12 19 X -1 26 X 0 26 X 1 26 X-12 27 X-11 27 X -1 27 X 1 27 X 11 27 X 12 27 X-12 28 X-11 28 X -1 28 X 1 28 X 11 28 X 12 28 END_OF_xlife-2.0/patterns/pifuse.life if test 507 -ne `wc -c <xlife-2.0/patterns/pifuse.life`; then echo shar: \"xlife-2.0/patterns/pifuse.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/piston2.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/piston2.life\" else echo shar: Extracting \"xlife-2.0/patterns/piston2.life\" \(275 characters\) sed "s/^X//" >xlife-2.0/patterns/piston2.life <<'END_OF_xlife-2.0/patterns/piston2.life' X#R X -3 -5 X-14 -4 X-13 -4 X -4 -4 X -3 -4 X 13 -4 X 14 -4 X-14 -3 X-13 -3 X -5 -3 X -4 -3 X 13 -3 X 14 -3 X -4 -2 X -3 -2 X 0 -2 X 1 -2 X -4 2 X -3 2 X 0 2 X 1 2 X-14 3 X-13 3 X -5 3 X -4 3 X 13 3 X 14 3 X-14 4 X-13 4 X -4 4 X -3 4 X 13 4 X 14 4 X -3 5 END_OF_xlife-2.0/patterns/piston2.life if test 275 -ne `wc -c <xlife-2.0/patterns/piston2.life`; then echo shar: \"xlife-2.0/patterns/piston2.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/rake.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/rake.life\" else echo shar: Extracting \"xlife-2.0/patterns/rake.life\" \(523 characters\) sed "s/^X//" >xlife-2.0/patterns/rake.life <<'END_OF_xlife-2.0/patterns/rake.life' X#P -12 -9 X...............**.....**** X.............**.**...*...* X.............****........* X..............**.....*..*. X.......................... X....................*..... X...............*...*..*... X..............**.......*.. X...............**......*.. X................**....**.. X*.*..................*.... X*..*..............**...... X.......................... X.***...................... X......................**** X....*..*.............*...* X........*................* X....*...*............*..*. X.....****................. END_OF_xlife-2.0/patterns/rake.life if test 523 -ne `wc -c <xlife-2.0/patterns/rake.life`; then echo shar: \"xlife-2.0/patterns/rake.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/rake3.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/rake3.life\" else echo shar: Extracting \"xlife-2.0/patterns/rake3.life\" \(891 characters\) sed "s/^X//" >xlife-2.0/patterns/rake3.life <<'END_OF_xlife-2.0/patterns/rake3.life' X#A X555 489 X553 488 X554 488 X551 489 X552 489 X554 489 X551 490 X552 490 X553 490 X554 490 X552 491 X553 491 X555 503 X553 502 X554 502 X551 503 X552 503 X554 503 X551 504 X552 504 X553 504 X554 504 X552 505 X553 505 X514 485 X513 486 X508 469 X509 469 X507 470 X508 470 X509 470 X510 470 X507 471 X508 471 X510 471 X511 471 X509 472 X510 472 X551 494 X551 495 X552 495 X550 496 X552 496 X553 496 X550 497 X552 497 X550 498 X551 498 X508 479 X509 479 X509 480 X510 480 X508 481 X513 484 X514 484 X535 503 X536 503 X534 504 X535 504 X536 504 X537 504 X534 505 X535 505 X537 505 X538 505 X536 506 X537 506 X529 501 X530 502 X523 494 X524 494 X524 495 X525 495 X523 496 X528 499 X529 499 X529 500 X530 500 X515 485 X518 489 X519 489 X519 490 X520 490 X518 491 X502 474 X503 474 X502 475 X503 475 X541 494 X542 494 X543 494 X541 495 X541 496 X542 496 X543 496 X544 497 X545 497 X546 497 X542 487 X545 487 X546 488 X542 489 X546 489 X543 490 X544 490 X545 490 X546 490 X492 474 X493 474 X492 475 X493 475 END_OF_xlife-2.0/patterns/rake3.life if test 891 -ne `wc -c <xlife-2.0/patterns/rake3.life`; then echo shar: \"xlife-2.0/patterns/rake3.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/relay.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/relay.life\" else echo shar: Extracting \"xlife-2.0/patterns/relay.life\" \(235 characters\) sed "s/^X//" >xlife-2.0/patterns/relay.life <<'END_OF_xlife-2.0/patterns/relay.life' X#R X-15 -3 X-10 -3 X-17 -2 X-16 -2 X-14 -2 X-13 -2 X-12 -2 X-11 -2 X -9 -2 X -8 -2 X-15 -1 X-10 -1 X -1 0 X 0 1 X 1 1 X 10 1 X 15 1 X -1 2 X 0 2 X 8 2 X 9 2 X 11 2 X 12 2 X 13 2 X 14 2 X 16 2 X 17 2 X 10 3 X 15 3 END_OF_xlife-2.0/patterns/relay.life if test 235 -ne `wc -c <xlife-2.0/patterns/relay.life`; then echo shar: \"xlife-2.0/patterns/relay.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/schooloffish.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/schooloffish.life\" else echo shar: Extracting \"xlife-2.0/patterns/schooloffish.life\" \(201 characters\) sed "s/^X//" >xlife-2.0/patterns/schooloffish.life <<'END_OF_xlife-2.0/patterns/schooloffish.life' X#P -5 -7 X.......*... X........*.. X..*.....*.. X...******.. X........... X........... X........... X.********** X*.........* X..........* X.........*. X........... X.......*... X........*.. X..*.....*.. X...******.. END_OF_xlife-2.0/patterns/schooloffish.life if test 201 -ne `wc -c <xlife-2.0/patterns/schooloffish.life`; then echo shar: \"xlife-2.0/patterns/schooloffish.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/sixgliders.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/sixgliders.life\" else echo shar: Extracting \"xlife-2.0/patterns/sixgliders.life\" \(242 characters\) sed "s/^X//" >xlife-2.0/patterns/sixgliders.life <<'END_OF_xlife-2.0/patterns/sixgliders.life' X#P -13 -3 X..................*......... X................**........*. X.................**...*..*.. X....*.*..............**..*** X***..**..............*.*.... X..*..*...**................. X.*........**................ X.........*.................. END_OF_xlife-2.0/patterns/sixgliders.life if test 242 -ne `wc -c <xlife-2.0/patterns/sixgliders.life`; then echo shar: \"xlife-2.0/patterns/sixgliders.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/slowship.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/slowship.life\" else echo shar: Extracting \"xlife-2.0/patterns/slowship.life\" \(694 characters\) sed "s/^X//" >xlife-2.0/patterns/slowship.life <<'END_OF_xlife-2.0/patterns/slowship.life' X#P -17 -9 X.................................** X.................*...............** X.......**.......******...........*. X.......*..***.*.......**......*..*. X......*..........*..*.**...*....*.. X.....****.*.*....*...***...**.***.* X.....**......***.......***......**. X....*.............................. X.***.*............................. X*..*............................... X.***.*............................. X....*.............................. X.....**......***.......***......**. X.....****.*.*....*...***...**.***.* X......*..........*..*.**...*....*.. X.......*..***.*.......**......*..*. X.......**.......******...........*. X.................*...............** X.................................** END_OF_xlife-2.0/patterns/slowship.life if test 694 -ne `wc -c <xlife-2.0/patterns/slowship.life`; then echo shar: \"xlife-2.0/patterns/slowship.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/slowship2.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/slowship2.life\" else echo shar: Extracting \"xlife-2.0/patterns/slowship2.life\" \(884 characters\) sed "s/^X//" >xlife-2.0/patterns/slowship2.life <<'END_OF_xlife-2.0/patterns/slowship2.life' X#P -22 -9 X.................................**......*.*. X.................*...............**.....***.* X.......**.......******...........*.....**.... X.......*..***.*.......**......*..*..*...*.... X......*..........*..*.**...*....*...*..*..... X.....****.*.*....*...***...**.***.*.*...*.... X.....**......***.......***......**...***..... X....*..................................**.... X.***.*....................................... X*..*......................................... X.***.*....................................... X....*........................................ X.....**......***.......***......**........... X.....****.*.*....*...***...**.***.*.......... X......*..........*..*.**...*....*............ X.......*..***.*.......**......*..*........... X.......**.......******...........*........... X.................*...............**.......... X.................................**.......... END_OF_xlife-2.0/patterns/slowship2.life if test 884 -ne `wc -c <xlife-2.0/patterns/slowship2.life`; then echo shar: \"xlife-2.0/patterns/slowship2.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/slowship3.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/slowship3.life\" else echo shar: Extracting \"xlife-2.0/patterns/slowship3.life\" \(1017 characters\) sed "s/^X//" >xlife-2.0/patterns/slowship3.life <<'END_OF_xlife-2.0/patterns/slowship3.life' X#A X36 59 X33 60 X36 60 X33 61 X36 61 X32 62 X33 63 X36 63 X33 64 X36 64 X36 65 X38 55 X40 55 X38 56 X43 56 X38 57 X40 57 X41 57 X42 57 X43 57 X44 57 X41 66 X38 67 X40 67 X41 67 X42 67 X43 67 X44 67 X38 68 X43 68 X38 69 X40 69 X41 58 X37 59 X37 60 X37 64 X37 65 X48 54 X47 55 X48 56 X50 56 X51 56 X52 56 X45 57 X46 57 X47 57 X47 66 X45 67 X46 67 X47 67 X48 68 X50 68 X51 68 X52 68 X47 69 X48 70 X47 58 X45 60 X46 60 X45 64 X46 64 X53 55 X54 55 X53 56 X54 56 X55 56 X60 56 X58 57 X55 66 X56 66 X57 66 X58 66 X58 67 X53 68 X54 68 X55 68 X60 68 X53 69 X54 69 X55 58 X56 58 X57 58 X58 58 X55 59 X56 59 X57 59 X59 59 X55 60 X56 60 X55 64 X56 64 X55 65 X56 65 X57 65 X59 65 X65 53 X64 54 X66 54 X63 55 X61 56 X61 57 X63 57 X64 57 X65 57 X67 57 X68 57 X63 66 X64 66 X65 66 X67 66 X61 67 X63 67 X64 67 X65 67 X67 67 X68 67 X61 68 X63 69 X64 70 X66 70 X65 71 X63 58 X64 58 X65 58 X67 58 X68 59 X68 65 X72 53 X73 53 X75 53 X71 54 X73 54 X74 54 X75 54 X71 55 X72 55 X70 56 X72 56 X69 57 X71 57 X72 57 X73 57 X72 66 X69 67 X71 67 X72 67 X73 67 X70 68 X72 68 X71 69 X72 69 X71 70 X73 70 X74 70 X75 70 X72 71 X73 71 X75 71 X72 58 X69 59 X70 59 X72 59 X70 60 X71 60 X70 64 X71 64 X69 65 X70 65 X72 65 END_OF_xlife-2.0/patterns/slowship3.life if test 1017 -ne `wc -c <xlife-2.0/patterns/slowship3.life`; then echo shar: \"xlife-2.0/patterns/slowship3.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/sparktopifuse.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/sparktopifuse.life\" else echo shar: Extracting \"xlife-2.0/patterns/sparktopifuse.life\" \(1075 characters\) sed "s/^X//" >xlife-2.0/patterns/sparktopifuse.life <<'END_OF_xlife-2.0/patterns/sparktopifuse.life' X#R X-27 -12 X-26 -12 X-18 -12 X-17 -12 X -9 -12 X -8 -12 X 0 -12 X 1 -12 X 9 -12 X 10 -12 X 18 -12 X 19 -12 X 27 -12 X 28 -12 X-27 -11 X-26 -11 X-18 -11 X-17 -11 X -9 -11 X -8 -11 X 0 -11 X 1 -11 X 9 -11 X 10 -11 X 18 -11 X 19 -11 X 27 -11 X 28 -11 X 26 -2 X 27 -2 X-26 -1 X-23 -1 X-20 -1 X-17 -1 X-14 -1 X-11 -1 X -8 -1 X -5 -1 X -2 -1 X 1 -1 X 4 -1 X 7 -1 X 10 -1 X 13 -1 X 16 -1 X 19 -1 X 22 -1 X 25 -1 X 27 -1 X-26 0 X-25 0 X-24 0 X-23 0 X-20 0 X-19 0 X-18 0 X-17 0 X-14 0 X-13 0 X-12 0 X-11 0 X -8 0 X -7 0 X -6 0 X -5 0 X -2 0 X -1 0 X 0 0 X 1 0 X 4 0 X 5 0 X 6 0 X 7 0 X 10 0 X 11 0 X 12 0 X 13 0 X 16 0 X 17 0 X 18 0 X 19 0 X 22 0 X 23 0 X 24 0 X 25 0 X-26 1 X-23 1 X-20 1 X-17 1 X-14 1 X-11 1 X -8 1 X -5 1 X -2 1 X 1 1 X 4 1 X 7 1 X 10 1 X 13 1 X 16 1 X 19 1 X 22 1 X 25 1 X 27 1 X 26 2 X 27 2 X-27 11 X-26 11 X-18 11 X-17 11 X -9 11 X -8 11 X 0 11 X 1 11 X 9 11 X 10 11 X 18 11 X 19 11 X 27 11 X 28 11 X-27 12 X-26 12 X-18 12 X-17 12 X -9 12 X -8 12 X 0 12 X 1 12 X 9 12 X 10 12 X 18 12 X 19 12 X 27 12 X 28 12 END_OF_xlife-2.0/patterns/sparktopifuse.life if test 1075 -ne `wc -c <xlife-2.0/patterns/sparktopifuse.life`; then echo shar: \"xlife-2.0/patterns/sparktopifuse.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/stargaterepeater.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/stargaterepeater.life\" else echo shar: Extracting \"xlife-2.0/patterns/stargaterepeater.life\" \(191 characters\) sed "s/^X//" >xlife-2.0/patterns/stargaterepeater.life <<'END_OF_xlife-2.0/patterns/stargaterepeater.life' X#P -6 -6 X......*...... X.....*.*..... X....*.*.*.... X....*...*.... X..**..*..**.. X.*....*....*. X*.*.**.**.*.* X.*....*....*. X..**..*..**.. X....*...*.... X....*.*.*.... X.....*.*..... X......*...... END_OF_xlife-2.0/patterns/stargaterepeater.life if test 191 -ne `wc -c <xlife-2.0/patterns/stargaterepeater.life`; then echo shar: \"xlife-2.0/patterns/stargaterepeater.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/test.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/test.life\" else echo shar: Extracting \"xlife-2.0/patterns/test.life\" \(1209 characters\) sed "s/^X//" >xlife-2.0/patterns/test.life <<'END_OF_xlife-2.0/patterns/test.life' X#A X76 31 X80 31 X78 32 X89 30 X89 31 X89 32 X84 31 X85 32 X86 32 X87 32 X88 32 X81 28 X86 28 X81 29 X84 29 X88 29 X81 30 X77 28 X78 28 X79 28 X80 28 X76 29 X57 50 X57 51 X58 51 X28 31 X29 31 X27 28 X28 28 X26 29 X27 29 X28 29 X29 29 X26 30 X27 30 X29 30 X30 30 X66 60 X67 60 X67 61 X68 61 X66 62 X99 65 X99 66 X100 66 X98 67 X100 67 X101 67 X98 68 X100 68 X98 69 X99 69 X83 74 X84 74 X82 75 X83 75 X84 75 X85 75 X82 76 X83 76 X85 76 X86 76 X84 77 X85 77 X36 27 X37 27 X34 28 X35 28 X37 28 X38 28 X34 29 X35 29 X36 29 X37 29 X35 30 X36 30 X60 31 X61 31 X67 31 X68 31 X69 31 X70 31 X71 31 X68 32 X69 32 X70 32 X70 29 X71 29 X67 30 X68 30 X69 30 X71 30 X72 30 X58 28 X59 28 X60 28 X57 29 X58 29 X59 29 X60 29 X61 29 X57 30 X58 30 X59 30 X61 30 X62 30 X101 73 X102 73 X99 74 X100 74 X102 74 X103 74 X99 75 X100 75 X101 75 X102 75 X100 76 X101 76 X101 59 X102 59 X99 60 X100 60 X102 60 X103 60 X99 61 X100 61 X101 61 X102 61 X100 62 X101 62 X49 31 X52 31 X50 28 X51 28 X52 28 X53 28 X49 29 X53 29 X53 30 X41 27 X44 27 X45 28 X41 29 X45 29 X42 30 X43 30 X44 30 X45 30 X56 50 X56 52 X77 71 X78 71 X77 72 X78 73 X90 58 X93 58 X94 59 X90 60 X94 60 X91 61 X92 61 X93 61 X94 61 X41 45 X41 46 X50 45 X51 45 X50 46 X51 46 X89 65 X90 65 X91 65 X89 66 X89 67 X90 67 X91 67 X92 68 X93 68 X94 68 X71 65 X72 65 X72 66 X71 67 X61 55 X62 55 X62 56 X63 56 X61 57 X40 45 X40 46 X73 66 X76 70 X77 70 X30 45 X31 45 X30 46 X31 46 END_OF_xlife-2.0/patterns/test.life if test 1209 -ne `wc -c <xlife-2.0/patterns/test.life`; then echo shar: \"xlife-2.0/patterns/test.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/testtube.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/testtube.life\" else echo shar: Extracting \"xlife-2.0/patterns/testtube.life\" \(218 characters\) sed "s/^X//" >xlife-2.0/patterns/testtube.life <<'END_OF_xlife-2.0/patterns/testtube.life' X#P -4 -9 X.**....**. X.*.*..*.*. X...*..*... X...*..*... X**.****.** X**.*..*.** X...*..*... X...*..*... X**.****.** X.*.*..*.*. X.*.*..*.*. X**.*..*.** X...****... X...*..*... X**.*..*.** X**.*..*.** X...****... X...*..*... X....**.... END_OF_xlife-2.0/patterns/testtube.life if test 218 -ne `wc -c <xlife-2.0/patterns/testtube.life`; then echo shar: \"xlife-2.0/patterns/testtube.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/thunderbirdfuse.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/thunderbirdfuse.life\" else echo shar: Extracting \"xlife-2.0/patterns/thunderbirdfuse.life\" \(243 characters\) sed "s/^X//" >xlife-2.0/patterns/thunderbirdfuse.life <<'END_OF_xlife-2.0/patterns/thunderbirdfuse.life' X#R X -8 -10 X -7 -10 X -6 -10 X-10 -8 X -4 -8 X 7 -8 X-10 -7 X -4 -7 X -2 -7 X -1 -7 X 0 -7 X 7 -7 X-10 -6 X -4 -6 X 7 -6 X -8 -4 X -7 -4 X -6 -4 X 9 -2 X 9 -1 X 9 0 X 8 7 X 9 7 X 10 7 X -5 8 X -5 9 X 2 9 X 3 9 X 4 9 X -5 10 END_OF_xlife-2.0/patterns/thunderbirdfuse.life if test 243 -ne `wc -c <xlife-2.0/patterns/thunderbirdfuse.life`; then echo shar: \"xlife-2.0/patterns/thunderbirdfuse.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/washerwoman.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/washerwoman.life\" else echo shar: Extracting \"xlife-2.0/patterns/washerwoman.life\" \(295 characters\) sed "s/^X//" >xlife-2.0/patterns/washerwoman.life <<'END_OF_xlife-2.0/patterns/washerwoman.life' X#P -27 -2 X*....................................................... X**....*.....*.....*.....*.....*.....*.....*.....*.....*. X***..*.*...*.*...*.*...*.*...*.*...*.*...*.*...*.*...*.* X**....*.....*.....*.....*.....*.....*.....*.....*.....*. X*....................................................... END_OF_xlife-2.0/patterns/washerwoman.life if test 295 -ne `wc -c <xlife-2.0/patterns/washerwoman.life`; then echo shar: \"xlife-2.0/patterns/washerwoman.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/patterns/wave1.life -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/patterns/wave1.life\" else echo shar: Extracting \"xlife-2.0/patterns/wave1.life\" \(309 characters\) sed "s/^X//" >xlife-2.0/patterns/wave1.life <<'END_OF_xlife-2.0/patterns/wave1.life' X#P -9 -7 X.........**........ X.........*.*....... X......**.*.*....... X.....*.*.*.*.**.... X.....*.*.*.*.*.*... X..**.*.*.*.*.*.*... X.*.*.*.*.*.*.*.*.** X.*.*.*.*.*.*.*.*.*. X**.*.*.*.*.*.*.*.*. X...*.*.*.*.*.*.**.. X...*.*.*.*.*.*..... X....**.*.*.*.*..... X.......*.*.**...... X.......*.*......... X........**......... END_OF_xlife-2.0/patterns/wave1.life if test 309 -ne `wc -c <xlife-2.0/patterns/wave1.life`; then echo shar: \"xlife-2.0/patterns/wave1.life\" unpacked with wrong size! fi # end of overwriting check fi if test -f xlife-2.0/resize.c -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"xlife-2.0/resize.c\" else echo shar: Extracting \"xlife-2.0/resize.c\" \(1547 characters\) sed "s/^X//" >xlife-2.0/resize.c <<'END_OF_xlife-2.0/resize.c' X/* X * XLife Copyright 1989 Jon Bennett jb7m+@andrew.cmu.edu, jcrb@cs.cmu.edu X * X * Permission to use, copy, modify, distribute, and sell this software and its X * documentation for any purpose is hereby granted without fee, provided that X * the above copyright notice appear in all copies and that both that X * copyright notice and this permission notice appear in supporting X * documentation, and that the name of the copyright holders not be used in X * advertising or publicity pertaining to distribution of the software without X * specific, written prior permission. The copyright holders make no X * representations about the suitability of this software for any purpose. It X * is provided "as is" without express or implied warranty. X * X * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, X * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO X * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR X * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, X * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER X * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR X * PERFORMANCE OF THIS SOFTWARE. X */ X X#include "defs.h" X X XDoResize() X{ X int owidth=width,oheight=height; X width = event.xconfigure.width; X height = event.xconfigure.height; X xpos+= (owidth - width)/2; X ypos+= (oheight - height)/2; X inputlength = width/FONTWIDTH; X XMoveWindow(disp,inputw,0,height-INPUTH); X redrawscreen(); X X} END_OF_xlife-2.0/resize.c if test 1547 -ne `wc -c <xlife-2.0/resize.c`; then echo shar: \"xlife-2.0/resize.c\" unpacked with wrong size! fi # end of overwriting check fi echo shar: End of archive 7 \(of 8\). cp /dev/null ark7isdone MISSING="" for I in 1 2 3 4 5 6 7 8 ; do if test ! -f ark${I}isdone ; then MISSING="${MISSING} ${I}" fi done if test "${MISSING}" = "" ; then echo You have unpacked all 8 archives. rm -f ark[1-9]isdone else echo You still need to unpack the following archives: echo " " ${MISSING} fi ## End of shell archive. exit 0 dan ---------------------------------------------------- O'Reilly && Associates argv@sun.com / argv@ora.com Opinions expressed reflect those of the author only.