kit@gateway.mitre.ORG (03/19/91)
Does anyone know of instances of the PP version of software (which includes X.400) having been ported to the Sun platform (presumably using SunNet OSI for the lower layers)? I was waiting till PP was merged into ISODE (such as in Version 7), but I just heard that that is no longer planned, at least not in the near future. Also, is there a separate email distribution list for discussions of PP, or is it shared with the isode@nic.ddn.mil discussion group? Thank you. Kit Lueder MITRE Corporation. kit@gateway.mitre.org
S.Kille@cs.ucl.ac.UK (Steve Kille) (03/19/91)
PP is not merged with ISODE, but is closely co-ordianted. SUN is the PP
development platform, and so porting should be no problem!
I append the PP announcement, which also points to the PP mailing list.
There has been a recent upgrade (5.2) available only electronically
Steve
From: Steve Kille <S.Kille@uk.ac.ucl.cs>
Subject: PP 5.0 Release Announcement
To: Multiple Lists:;
Date: Fri, 21 Sep 90 11:35:33 BST
We are delighted to annonce the first public release of the
PP Message Transfer Agent.
Steve Kille + Julian Onions
A N N O U N C E M E N T
The next release of PP will be available on September 21st, 1990. This
release will be the first general public release. It is known as
PP 5.0
PP is a Message Transfer Agent, intended for high volume message
switching, protocol conversion, and format conversion. It is targeted for
use in an operational environment, but may also be useful for investigating
Message related applications. Good management features are a major
aspect of this system. PP supports the 1984 and 1988 versions of the
CCITT X.400 / ISO 10021 services and protocols. Many existing RFC 822
based protocols are supported, along with RFC 1148 conversion to X.400.
PP is an appropriate replacement for MMDF or Sendmail.
o PP is not proprietary and can be used for any purpose. The only
restriction is that suing of the authors for any damage the code may
cause is not allowed.
o PP runs on a range of UNIX and UNIX-like operating systems, in
particular: SUNOS, Ultrix, and BSD. No kernel modifications are
required.
o Current modules include:
- X.400 (1984) P1 protocol
- JNT Mail (Grey Book) Protocol
- Simple Mail Transfer Protocol (SMTP / RFC 821)
- UUCP Mail transfer
- Distribution List expansion and maintenance.
- RFC 822 based local delivery
- Delivery time processing of messages
- Conversion between X.400 and RFC 822 according to RFC 1148
and RFC 987
- Conversion support for reformatting body parts and headers.
- X-Windows based management console.
- Message Authorisation checking
- X.400 (1988) P1 protocol (beta test)
- X.500 based distribution list facility using the QUIPU directory
(beta test)
o No User Agents (UAs) are included with PP. However, procedural
access to the MTA is documented, to encourage others to write or to
port UAs. Several existing UAs, such as MH, may be used with PP.
o PP 5.0 requires ISODE 6.0. Releases of ISODE before and after 6.0
cannot be used as alternatives.
1
o X-Windows release X11R4 is neded by some of the management
tools. PP can be operated without these tools.
o Although PP is not "supported" per se (but see later), it does have a
problem reporting address:
RFC 822: PP-SUPPORT@CS.UCL.AC.UK
X.400: S=PP-Support; OU=CS; O=UCL;
PRMD=UK.AC; ADMD= ; C=GB;
Bug reports (and fixes) are welcome.
o The discussion group PP-PEOPLE@CS.UCL.AC.UK is used as an
open forum on PP; Contact
PP-PEOPLE-REQUEST@CS.UCL.AC.UK to be added to this list.
o The primary documentation for this release consists of a three and a
half volume User's Manual (approx. 300 pages) and a set of UNIX
manual pages. The sources to the User's Manual are in LaTeX
format.
For more information, contact:
Steve Kille
Department of Computer Science
University College London
Gower Street
London
WC1E 6BT
England
2
DISTRIBUTION SITES
NIFTP
If you run NIFTP over the public X.25 or over JANET, and are registered
in the NRS at Salford, you can use NIFTP with username "guest" and
your own name as password, to access UK.AC.UCL.CS to retrieve the file
pp/pp-5.tar. The file <PP>pp-5.tar.Z is the tar image after being run
through the compress program (approx 2Mb).
FTP
If you can FTP to the Internet from outside Europe, then use anonymous
FTP to uu.psi.com [136.161.128.3] to retrieve the file pp-5.tar.Z in
BINARY mode from the isode/ directory. This file is the tar image after
being run through the compress program and is approximately 2Mb in size.
If you can FTP to the Internet from Europe, then use anonymous FTP to
nic.eu.net [192.16.202.1] to retrieve the file pp-5.tar.Z in BINARY mode
from the network/isode/ directory. This file is the tar image after being
run through the compress program and is approximately 2Mb in size.
EUROPE (tape and documentation)
For mailings in EUROPE, send a cheque or bankers draft and a purchase
order for 200 Pounds Sterling to:
Postal address: Department of Computer Science
Attn: Natalie May/Dawn Bailey
University College London
Gower Street
London, WC1E 6BT
UK
For information only:
Telephone: +44 1-380-7214
Fax: +44 1-387-1397
Telex: 28722
Internet: natalie@cs.ucl.ac.uk
dawn@cs.ucl.ac.uk
Specify one of:
1. 1600bpi 1/2-inch tape, or
2. Sun 1/4-inch cartridge tape.
The tape will be written in tar format and returned with a documentation
set. Do not send tapes or envelopes. Documentation only is the same price.
3
EUROPE (tape only)
Tapes without hardcopy documentation can be obtained via the Software
Distribution service of the European Unix User group (EUUG). The PP-5
distribution is called "EUUGD22 - PP (5.0)".
Postal address: EUUG Software Distributions
c/o Frank Kuiper
Centrum voor Wiskunde en Informatica
Kruislaan 413
1098 SJ Amsterdam
The Netherlands
For information only:
Telephone: +31 20-5924121
(or +31 20-5929333)
Telex: 12571 mactr nl
Telefax: +31-20-5924199
Internet: euug-tapes@cwi.nl
Specify one of:
1. 1600bpi 1/2-inch tape: 130 Dutch Guilders
2. 800bpi 1/2-inch tape: 150 Dutch Guilders
3. Sun 1/4-inch cartridge tape (QIC-24 format): 190 Dutch Guilders
4. Sun 1/4-inch cartridge tape (QIC-11 format): 215 Dutch Guilders
If you require DHL this is possible and will be billed through. Note that if
you are not a member of EUUG, then there is an additional handling fee of
300 Dutch Guilders (please encloses a copy of your membership or
contribution payment form when ordering). Do not send money, cheques,
tapes or envelopes, you will be invoiced.
NORTH AMERICA
For mailings in NORTH AMERICA, send a check for 375 US Dollars to:
Postal address: University of Pennsylvania
Department of Computer and Information Science
Moore School
Attn: David J. Farber (PP Distribution)
200 South 33rd Street
Philadelphia, PA 19104-6314
US
Telephone: +1 215-898-8560
Specify one of:
1. 1600bpi 1/2-inch tape, or
4
2. Sun 1/4-inch cartridge tape.
The tape will be written in tar format and returned with a documentation
set. Do not send tapes or envelopes. Documentation only is the same price.
AUSTRALIA and NEW ZEALAND
For mailings in AUSTRALIA and NEW ZEALAND,
1. If you already have ISODE-6.0, send a cheque for 100 dollars
Australian to the following address. You will recieve only the PP
manuals and a PP tape. CLEARLY SPECIFY ON THE CHEQUE
AND ORDER THAT YOU ONLY WANT PP.
2. If you do not have ISODE-6.0, send a cheque for 300 dollars
Australian to the following address. You will recieve a tape
containing both ISODE-6.0 and PP, together with manuals for both
ISODE-6.0 and PP.
Postal address: CSIRO DIT
Attn: Andrew Waugh (ISODE Distribution)
55 Barry Street
Carlton, 3053
Australia
For information only:
Telephone: +61 3-347-8644
Fax: +61 3-347-8987
Internet: ajw@ditmela.oz.au
Specify one of:
1. 1600/3200/6250bpi 1/2-inch tape, or
2. Sun 1/4_inch cartridge tape in either QIC-11 or QIC-24 format.
The tape will be written in tar format and returned with a documentation
set. Do not send tapes or envelopes. Documentation only is the same price.
FTAM on JANET or PSS
The source code is available by FTAM at the University College London
over X.25 using JANET (DTE 00000511160013) or PSS (DTE
23421920030013) with TSEL 259 (ASCII encoding). Use the "anon"
user-identity and retrieve the file pp-5.tar. The file pp-5.tar.Z is the
tar image after being run through the compress program (2Mb).
5
FTAM on the Internet
The source code is available by FTAM over the Internet at host
osi.nyser.net [192.33.4.10] (TCP port 102 selects the OSI transport
service) with TSEL 259 (numeric encoding). Use the "anon" user-identity,
supply any password, and retrieve pp-5.tar.Z from the isode directory.
This file is the tar image after being run through the compress program
and is approximately 2Mb in size.
Online Postscript
For distributions via FTAM, the file service is provided by the FTAM
implementation in ISODE 5.0 or later (IS FTAM).
For distributions via either FTAM or FTP, there are additional file
available for retrieval, called pp-5-ps-a4.tar.Z and pp-5-ps-us.tar.Z
which are compressed tar images (??MB) containing the entire
documentation set in PostScript format, for A4 and US paper respectively.
SUPPORT
A UK company has been set up to provide support for the ISODE, PP
associated packages - X-Tel Services Ltd. This company provides an
update service, general assistance and site specific support. This company
is closely associated with the development of PP.
Postal Address: X-Tel Services Ltd.
Tower Block
Nottingham University
Nottingham, NG7 2RD
UK
Telephone: +44 602-412648
Fax: +44 602-588138
Internet: support@xtel.co.uk
xtel@cs.nott.ac.uk
6