shadow@uafhp.uark.edu (Kyoki-san) (08/26/90)
I know you think it's funny, but I have got GNU Emacs 18.54 99% working using my Model 100 as the display. I have only two problems, I think: 1) All lines are overwriting each other. I.e. I get carriage-returns, but no linefeeds. 2) The status line is getting a "D" at the beginning of the line instead of being displayed in reverse video. Can anyone help me to solve these two little problems? Here is my termcap file which I have compiled with 'tic': m100|rs100|R/S Model 100, il1=\EL, am, bs, ed=^L, el=\EK, clear=\EE, cup=\EY%+\040%+\040, co#40, dl1=\EM, home=\EH, kcud1=^_, kcub1=^], kcuf1=^\, kcuu1=^^, cub1=^H, li#8, cuf1=^\, rmso=\Eq, smso=\Ep, cuu1=\EA, xt Any help you can give me would be much appreciated. By the way, 'vi' complains that it recquires scrolling.... James
bsp09@audrey.cs.tu-berlin.de (Uebung bsp) (08/26/90)
In article <5145@uafhp.uark.edu> shadow@uafhp.uark.edu (Kyoki-san) writes:
I know you think it's funny, but I have got GNU Emacs 18.54 99% working
using my Model 100 as the display. I have only two problems, I think:
1) All lines are overwriting each other. I.e. I get carriage-returns, but
no linefeeds.
2) The status line is getting a "D" at the beginning of the line instead of
being displayed in reverse video.
My Problem is similar: Using a 386-PC with Interactive 386ix 3.2 and
GNU Emacs 18.55 I do NOT have problem no. 1) (as above), but problem
no. 2), if the console (terminal at386) is used.
All other screen-oriented programs I tested are running well.
(Nethack, vi (of course!), user interface of a mailbox, MicroEmacs
3.9, etc.). Inverse video used by these programs is correct.
I made one patch to the Emacs source:
In sysdep.c I #undef'ed TIOCGETC after #including <termio.h>. this was
necessary because termio.h defines TIOCGETC, but omits a definition
Emacs needs if TIOCGETC is defined.
Any help is welcome, thanks in advance!
Juergen
--
-----------------
Juergen Nickelsen
nickelsen@mikroperipherik.e-technik.tu-berlin.dbp.deckd@cs.bu.edu (Christopher Davis) (08/28/90)
bsp> On 25 Aug 90 21:04:37 GMT, bsp09@audrey.cs.tu-berlin.de (Uebung bsp) said:
shadow> In <5145@uafhp.uark.edu> shadow@uafhp.uark.edu (Kyoki-san) writes:
shadow> I know you think it's funny, but I have got GNU Emacs 18.54 99%
shadow> working using my Model 100 as the display. I have only two
shadow> problems, I think:
shadow> [...]
shadow> 2) The status line is getting a "D" at the beginning of the line
shadow> instead of being displayed in reverse video.
bsp> My Problem is similar: Using a 386-PC with Interactive 386ix 3.2 and
bsp> GNU Emacs 18.55 I do NOT have problem no. 1) (as above), but problem
bsp> no. 2), if the console (terminal at386) is used.
bsp> Any help is welcome, thanks in advance!
I have experienced this problem as well (AT&T 6386 WGS with AT&T SysV); the
solution is buried in etc/TERMS.
It turns out that the 'xt' terminfo attribute is usually incorrect. Use
infocmp -I to read out the AT386 entries, remove 'xt' from the entries,
then use tic to recompile them. (The same problem is evidenced on the TRS
Model 100, I guess.)
--
Christopher Davis, BU SMG '90 <ckd@cs.bu.edu> <...!bu.edu!cs.bu.edu!ckd>
"Dammit, we're all going to die, let's die doing something *useful*!"
--Hal Clement on comments that space exploration is dangerous