jkg@gatech.edu (Jim Greenlee) (03/23/89)
[ This article and follow-ups are re-directed to comp.sys.ibm.pc. I hope nobody over there minds. - jkg ] In article <447@holin.ATT.COM> doc@holin.ATT.COM (David Mundhenk) writes: >On that same note, does anyone know why PROCOMM's kermit would have >problems talking to C-Kermit on the 3B's mentioned above? The parameters >all seem to be set OK....again, either direct or thru a modem. Well, I pretty much gave up on Procomm after 1000-byte packets were added to Kermit. This is a common problem, though (my students have asked this question so many times that I now include the answer in the write-up for my courses! :-). Unfortunately, I don't have the exact details handy, so this will be from memory. What you have to do is change the checksum parameter in the Kermit set-up menu. I think the default of "1-byte" checksum must be changed to "2-byte" checksum. It may be the other way around, though. Jim Greenlee -- Jim Greenlee - Instructor, School of ICS, Georgia Tech jkg@gatech.edu Jryy, abj lbh'ir tbar naq qbar vg! Whfg unq gb xrrc svqqyvat jvgu vg hagvy lbh oebxr vg, qvqa'g lbh?!