[comp.binaries.ibm.pc.d] FTP servers ?

w8sdz@vela.acs.oakland.edu (Keith Petersen) (01/21/91)

cbsnsr@nmt.edu (Brog of Sacum) writes:
>Does anyone know any FTP server addresses?
>I do not have FTP access with this account.
>Thanks for any help.

SIMTEL20 files may be ordered from LISTSERV@VM1.NODAK.EDU or
LISTSERV@VM.ECS.RPI.EDU.

           If you are on BITNET: LISTSERV@NDSUVM1
                                 LISTSERV@RPIECS

   If your mailer knows domains: listserv@vm1.nodak.edu
				 listserv@vm.ecs.rpi.edu
If your mailer wants bang paths: uunet!vm1.nodak.edu!listserv
				 uunet!vm.ecs.rpi.edu!listserv

If you use bang paths, substitute your nearest neighbor which is also
on the Internet for uunet in the examples above.  Some examples are:
ames, decvax, decwrl, harvard, hplabs, nosc, rutgers, sharkey, sun,
ucbvax, ucsd, udel, uw-beaver, wuarchive.

Send this command to the server to get its help file:

GET PDGET HELP

Sample command (which gets our catalog of files):

/PDGET MAIL PD:<MSDOS.FILEDOCS>SIMIBM.ARC UUENCODE

These commands should be sent as the body of a regular email message.
Do not include a signature because it confuses the server.  If you
have xxdecode, you may wish to specify XXENCODE instead of UUENCODE to
avoid character translation problems.

If you have suggestions or unsolvable problems please contact one of
these persons, depending on which server you normally use:

                    Internet                  BITNET

  "John Fisher" <FISHER@VM.ECS.RPI.EDU>   <FISHER@RPIECS>
  "Marty Hoag"  <INFO@VM1.NODAK.EDU>      <INFO@NDSUVM1>

DO NOT send your comment or question about the servers to SIMTEL20.
However, if you wish to report a program bug or to request information
on how to upload files to SIMTEL20, you may send e-mail to me at one
of the addresses below.

Keith
--
Keith Petersen
Maintainer of SIMTEL20's MSDOS, MISC & CP/M archives [IP address 26.2.0.74]
Internet: w8sdz@WSMR-SIMTEL20.Army.Mil    or     w8sdz@vela.acs.oakland.edu
Uucp: uunet!wsmr-simtel20.army.mil!w8sdz              BITNET: w8sdz@OAKLAND

etxsral@california.ericsson.se (Lars Nilsson) (05/19/91)

I have noticed that bitftp now is closed to hosts that don't
belong to BITNET,EARN or NetNorth.
I did know that this would happen sooner or later when the
traffic on bitftp for non-bitnet hosts growed.

Is there some other ftp-servers that can be used for us poor
people that only have mail ?

The computerpeople on Ericsson want's network connection but
our security people doesn't :-(

/Lars Nilsson
--
Lars Nilsson        
Ericsson Telecom AB , Stockholm - Sweden
E-mail: etxsral@california.ericsson.se
Fidonet: Lars Nilsson @ 2:201/108.7

w8sdz@rigel.acs.oakland.edu (Keith Petersen) (05/20/91)

etxsral@california.ericsson.se (Lars Nilsson) writes:
>I have noticed that bitftp now is closed to hosts that don't
>belong to BITNET,EARN or NetNorth.
>I did know that this would happen sooner or later when the
>traffic on bitftp for non-bitnet hosts growed.
>
>Is there some other ftp-servers that can be used for us poor
>people that only have mail ?

SIMTEL20 files may be ordered from LISTSERV@VM1.NODAK.EDU or
LISTSERV@VM.ECS.RPI.EDU.

           If you are on BITNET: LISTSERV@NDSUVM1
                                 LISTSERV@RPIECS

   If your mailer knows domains: listserv@vm1.nodak.edu
				 listserv@vm.ecs.rpi.edu
If your mailer wants bang paths: uunet!vm1.nodak.edu!listserv
				 uunet!vm.ecs.rpi.edu!listserv

If you use bang paths, substitute your nearest neighbor which is also
on the Internet for uunet in the examples above.  Some examples are:
ames, decvax, decwrl, harvard, hplabs, nosc, rutgers, sharkey, sun,
ucbvax, ucsd, udel, uw-beaver, wuarchive.

Send this command to the server to get its help file:

GET PDGET HELP

Sample command (which gets our catalog of MS-DOS files):

/PDGET MAIL PD:<MSDOS.FILEDOCS>SIMIBM.ARC UUENCODE

These commands should be sent as the body of a regular email message.
Do not include a signature because it confuses the server.  If you
have xxdecode, you may wish to specify XXENCODE instead of UUENCODE to
avoid character translation problems.

Comments, questions, and suggestions should be directed to the LISTSERV
manager at one of these addresses, depending on which server you normally
use:

                    Internet                  BITNET

  "John Fisher" <FISHER@VM.ECS.RPI.EDU>   <FISHER@RPIECS>
  "Marty Hoag"  <INFO@VM1.NODAK.EDU>      <INFO@NDSUVM1>

DO NOT send your comment or question about the servers to SIMTEL20.
However, if you wish to report a program bug or to request information
on how to upload files to SIMTEL20, you may send e-mail to me at one
of the addresses below.

Keith
- - - 
Keith Petersen
Maintainer of SIMTEL20's MSDOS, MISC and CP/M archives  -  [192.88.110.20]
Internet: w8sdz@WSMR-SIMTEL20.Army.Mil    or    w8sdz@vela.acs.oakland.edu
Uucp: uunet!umich!vela!w8sdz                         BITNET: w8sdz@OAKLAND