ptrepan1@umn-d-ub.D.UMN.EDU (pat trepanier) (10/26/89)
Here are the docs for kermit 3.86 in postscript formmat the three files
must be appended toghether.
-----------------------cut here--------------------------------
%!PS-Adobe-2.0
%%Title: apphdr.mss
%%DocumentFonts: (atend)
%%Creator: Ted Medin,NOSC Apple Kermit,, and Scribe 7(1700)
%%CreationDate: 24 October 1989 15:51
%%Pages: (atend)
%%EndComments
% PostScript Prelude for Scribe.
/BS {/SV save def 0.0 792.0 translate .01 -.01 scale} bind def
/ES {showpage SV restore} bind def
/SC {setrgbcolor} bind def
/FMTX matrix def
/RDF {WFT SLT 0.0 eq
{SSZ 0.0 0.0 SSZ neg 0.0 0.0 FMTX astore}
{SSZ 0.0 SLT neg sin SLT cos div SSZ mul SSZ neg 0.0 0.0 FMTX astore}
ifelse makefont setfont} bind def
/SLT 0.0 def
/SI { /SLT exch cvr def RDF} bind def
/WFT /Courier findfont def
/SF { /WFT exch findfont def RDF} bind def
/SSZ 1000.0 def
/SS { /SSZ exch 100.0 mul def RDF} bind def
/AF { /WFT exch findfont def /SSZ exch 100.0 mul def RDF} bind def
/MT /moveto load def
/XM {currentpoint exch pop moveto} bind def
/UL {gsave newpath moveto dup 2.0 div 0.0 exch rmoveto
setlinewidth 0.0 rlineto stroke grestore} bind def
/LH {gsave newpath moveto setlinewidth
0.0 rlineto
gsave stroke grestore} bind def
/LV {gsave newpath moveto setlinewidth
0.0 exch rlineto
gsave stroke grestore} bind def
/BX {gsave newpath moveto setlinewidth
exch
dup 0.0 rlineto
exch 0.0 exch neg rlineto
neg 0.0 rlineto
closepath
gsave stroke grestore} bind def
/BX1 {grestore} bind def
/BX2 {setlinewidth 1 setgray stroke grestore} bind def
/PB {/PV save def newpath translate
100.0 -100.0 scale pop /showpage {} def} bind def
/PE {PV restore} bind def
/GB {/PV save def newpath translate rotate
div dup scale 100.0 -100.0 scale /showpage {} def} bind def
/GE {PV restore} bind def
/FB {dict dup /FontMapDict exch def begin} bind def
/FM {cvn exch cvn exch def} bind def
/FE {end /original-findfont /findfont load def /findfont
{dup FontMapDict exch known{FontMapDict exch get} if
original-findfont} def} bind def
/BC {gsave moveto dup 0 exch rlineto exch 0 rlineto neg 0 exch rlineto closepath clip} bind def
/EC /grestore load def
/SH /show load def
/MX {exch show 0.0 rmoveto} bind def
/W {0 32 4 -1 roll widthshow} bind def
/WX {0 32 5 -1 roll widthshow 0.0 rmoveto} bind def
/RC {100.0 -100.0 scale
612.0 0.0 translate
-90.0 rotate
.01 -.01 scale} bind def
/URC {100.0 -100.0 scale
90.0 rotate
-612.0 0.0 translate
.01 -.01 scale} bind def
/RCC {100.0 -100.0 scale
0.0 -792.0 translate 90.0 rotate
.01 -.01 scale} bind def
/URCC {100.0 -100.0 scale
-90.0 rotate 0.0 792.0 translate
.01 -.01 scale} bind def
%%EndProlog
%%Page: 0 1
BS
0 SI
15 /Times-Bold AF
20301 28325 MT
(APPLE II KERMIT USER GUIDE)SH
13 SS
28213 31684 MT
(Version 3.86)SH
10 /Times-Roman AF
27888 34567 MT
(Ted Medin, NOSC)SH
/Times-Italic SF
29069 39351 MT
(1989 Sept 25)SH
/Times-Roman SF
26610 44135 MT
(Copyright \050C\051 1981,1989)SH
20111 45331 MT
(Trustees of Columbia University in the City of New York)SH
/Times-Italic SF
18429 47723 MT
(Permission is granted to any individual or institution to use, copy,)SH
18178 48919 MT
(or redistribute this document so long as it is not sold for profit, and)SH
23291 50115 MT
(provided this copyright notice is retained.)SH
ES
%%Page: 1 2
BS
0 SI
12 /Times-Bold AF
8280 4404 MT
(1. Apple II Kermit)SH
10 /Times-Italic AF
52275 XM
(Page 1)SH
46800 50 8280 5709 UL
16 /Times-Bold AF
8280 8272 MT
(1. Apple II Kermit)SH
10 /Times-Roman AF
8280 10566 MT
(Authors:)SH
14280 XM
(Antonino N. J. Mione \050Stevens Institute of Technology\051,)SH
14280 11671 MT
(Peter Trei \050Columbia University\051,)SH
14280 12776 MT
(Ted Medin \050NOSC\051,)SH
14280 13881 MT
(Bob Holley \050SERDAC\051)SH
8280 15539 MT
(Version:)SH
14280 XM
(3.86)SH
8280 17197 MT
(Date:)SH
14280 XM
(1989 Sept)SH
/Times-Italic SF
8280 19589 MT
(Kermit-65 Capabilities At A Glance:)SH
/Times-Roman SF
9280 21199 MT
(Local operation:)SH
34480 XM
(Yes)SH
9280 22304 MT
(Remote operation:)SH
34480 XM
(Yes)SH
9280 23409 MT
(Transfers text files:)SH
34480 XM
(Yes)SH
9280 24514 MT
(Transfers binary files:)SH
34480 XM
(Yes)SH
9280 25619 MT
(Wildcard send:)SH
34480 XM
(Yes)SH
/Courier SF
9280 26724 MT
(^X/^Y)SH
/Times-Roman SF
12530 XM
(interruption\050Q\051:)SH
34480 XM
(Yes)SH
9280 27829 MT
(Filename collision avoidance:)SH
34480 XM
(Yes)SH
9280 28934 MT
(Can time out:)SH
34480 XM
(Yes)SH
9280 30039 MT
(8th-bit prefixing:)SH
34480 XM
(Yes)SH
9280 31144 MT
(Repeat count prefixing:)SH
34480 XM
(No)SH
9280 32249 MT
(Alternate block checks:)SH
34480 XM
(No)SH
9280 33354 MT
(Terminal emulation:)SH
34480 XM
(Yes \050VT52, VT100\051)SH
9280 34459 MT
(Communication settings:)SH
34480 XM
(Yes)SH
9280 35564 MT
(Transmit BREAK:)SH
34480 XM
(Yes)SH
9280 36669 MT
(IBM communication:)SH
34480 XM
(Yes)SH
9280 37774 MT
(Transaction logging:)SH
34480 XM
(No)SH
9280 38879 MT
(Session logging \050raw download\051:)SH
34480 XM
(Yes)SH
9280 39984 MT
(Raw upload:)SH
34480 XM
(No)SH
9280 41089 MT
(Act as server:)SH
34480 XM
(Yes)SH
9280 42194 MT
(Talk to server:)SH
34480 XM
(Yes)SH
9280 43299 MT
(Advanced commands for servers:)SH
34480 XM
(Yes)SH
9280 44404 MT
(Long packets:)SH
34480 XM
(Yes)SH
9280 45509 MT
(Sliding windows:)SH
34480 XM
(No)SH
9280 46614 MT
(Local file management:)SH
34480 XM
(Yes)SH
9280 47719 MT
(Handle file attributes:)SH
34480 XM
(No)SH
9280 48824 MT
(Command/init files:)SH
34480 XM
(Yes)SH
9280 49929 MT
(Printer control:)SH
34480 XM
(Yes)SH
8280 52321 MT
(Kermit-65 is a program that implements the Kermit file)
103 W( transfer protocol for the Motorola 6502 processor family)102 W
8280 53517 MT
(\050hence the name, Kermit-65\051 on the)
75 W( Apple II microcomputer system. It is written in 6502 assembly language and)76 W
8280 54713 MT
(should run on any Apple II or compatible running DOS 3.3 or PRODOS. This)
46 W( section will describe the things you)45 W
8280 55909 MT
(should know about the file system in order to make effective use of)
108 W( Kermit, and then it will describe the special)109 W
8280 57105 MT
(features of the Kermit-65 program.)SH
14 /Times-Bold AF
8280 60707 MT
(1.1. Supported Systems and Devices)SH
10 /Times-Roman AF
8280 62825 MT
(There are several different Apple II's which can)
17 W( run Kermit-65. Kermit will have no problems running on an Apple)16 W
8280 64021 MT
(II, II+, //e, //c)
12 W( or //gs system. Of the different communication devices available for the Apple II, Kermit-65 supports)13 W
8280 65217 MT
(the ones shown in Table 1-1.)SH
8280 67609 MT
(It is possible that other cards may have operational characteristics very similar or identical to one of the devices)119 W
8280 68805 MT
(above. If this is the case, it may work using one of the currently available device drivers. The user)
35 W( may want to try)36 W
8280 70001 MT
(each of the above options to see if any of them)
55 W( work. Kermit-65 must be told in which slot the card resides. This)54 W
8280 71197 MT
(may be done with the 'SET' command \050documented below\051.)SH
ES
%%Page: 2 3
BS
0 SI
10 /Times-Italic AF
6120 4404 MT
(Page 2)SH
12 /Times-Bold AF
32217 XM
(Kermit User Guide: Apple II Kermit 1.2)SH
46800 50 6120 5709 UL
46800 50 6120 8086 UL
10 /Times-Roman AF
16920 10820 MT
(AE Serial Pro \050super serial driver - sw 1 & 3 open 2 & 4 closed\051)SH
16920 11925 MT
(AIO II \050Uses the Apple Com Card driver??? - untested\051)SH
16920 13030 MT
(ALS dispatcher \050Uses the Apple Com Card driver\051)SH
16920 14135 MT
(Apple Cat Serial Card)SH
16920 15240 MT
(Apple Com Serial Card)SH
16920 16345 MT
(ASIO \050Uses the Apple Com Card driver??? - untested\051)SH
16920 17450 MT
(Apple Super Serial Card & //c Serial Port)SH
16920 18555 MT
(Apple //gs Serial Port)SH
16920 19660 MT
(CCS 7710 Serial Card)SH
16920 20765 MT
(CCS 7711 \050Uses the Apple Com Card driver??? - untested\051)SH
16920 21870 MT
(D.C. Hayes Micromodem.)SH
16920 22975 MT
(Microtek sv-622 Card)SH
16920 24080 MT
(Prometheus Versacard \050Uses the Apple Com Card driver\051)SH
16920 25185 MT
(SSM AIO \050Uses the Apple Com Card driver??? - untested\051)SH
/Times-Bold SF
15757 26795 MT
(Table 1-1:)SH
/Times-Roman SF
20618 XM
(Apple II Communication Cards Supported by Kermit-65)SH
46800 50 6120 28605 UL
14 /Times-Bold AF
6120 32007 MT
(1.2. The DOS 3.3 File System)SH
10 /Times-Roman AF
6120 34125 MT
(Items of importance which will be discussed in this section include filenames and file characteristics.)SH
/Times-Bold SF
8120 36403 MT
(Apple DOS Filenames)SH
/Times-Roman SF
6120 38169 MT
(Filenames under Apple DOS may contain almost any ASCII)
17 W( character \050including space\051. It is not recommended that)18 W
6120 39365 MT
(special characters, \050i.e. control characters or)
29 W( spaces\051 be used in a filename to be transferred by Kermit-65 since they)28 W
6120 40561 MT
(may cause problems when parsing the filename. Filenames may be up to 40 characters in length.)SH
/Times-Bold SF
8120 42839 MT
(Apple DOS File Characteristics)SH
/Times-Roman SF
6120 45231 MT
(All files in Apple DOS have a file type associated with them which is contained)
6 W( in the directory entry for the file but)7 W
6120 46427 MT
(is not part of the filename itself. There are four types of files in DOS 3.3. They are:)SH
8120 48218 MT
(1.)SH
9120 XM
(APPLESOFT BASIC)SH
8120 49323 MT
(2.)SH
9120 XM
(INTEGER BASIC)SH
8120 50428 MT
(3.)SH
9120 XM
(BINARY)SH
8120 51533 MT
(4.)SH
9120 XM
(TEXT)SH
6120 53925 MT
(All file types have)
21 W( their data stored in eight-bit bytes although not all of them need the eighth bit. The two file types)20 W
6120 55121 MT
(containing basic programs required the eighth bit due to the nature)
154 W( of the data being stored. BINARY files are)155 W
6120 56317 MT
(images of memory copied into a file. Often,)
109 W( these are machine code programs. These files require all eight bits.)108 W
6120 57513 MT
(TEXT files normally contain only)
60 W( printable or carriage control characters. They are stored in the form of seven-bit)61 W
6120 58709 MT
(ASCII characters but the)
112 W( eighth bit should always be set since Apples manipulate all text internally as 'Negative)111 W
6120 59905 MT
(ASCII'. When)
348 W( transmitting non-text files the user must insure that both Kermits are)
49 W( handling eight-bit data so that)50 W
6120 61101 MT
(no information is lost. If an eight-bit data path is)
70 W( not available \050i.e. the remote Kermit needs to do parity checking)69 W
6120 62297 MT
(with the eighth bit\051, then eight-bit quoting should be used.)
41 W( Of)
334 W( course, BINARY files as well as Apple BASIC files)42 W
6120 63493 MT
(will not have much meaning on a different system. If)
113 W( the user desires to edit a BASIC file on a mainframe, for)112 W
6120 64689 MT
(instance, s/he must convert it to a TEXT file before sending it over. After)
54 W( receiving the file back on the Apple, the)55 W
6120 65885 MT
(user may)
175 W( convert it back to BASIC once again. The reason BASIC files would be meaningless to a different)174 W
6120 67081 MT
(machine is that)
27 W( the Apple stores BASIC keywords as single character tokens to save space and processing time. To)28 W
6120 68277 MT
(convert a BASIC program to and from a TEXT file, consult the Apple DOS 3.3 Manual.)
78 W( File)
405 W( information can be)77 W
6120 69473 MT
(obtained by issuing the CATALOG command. For example:)SH
/Courier SF
9720 71128 MT
(]CATALOG)SH
ES
%%Page: 3 4
BS
0 SI
12 /Times-Bold AF
8280 4404 MT
(1.2. The DOS 3.3 File System)SH
10 /Times-Italic AF
52275 XM
(Page 3)SH
46800 50 8280 5709 UL
/Courier SF
12480 7824 MT
(DISK VOLUME 010)SH
13680 9479 MT
(*A 002 HELLO)SH
14280 10510 MT
(B 078 KERMIT)SH
14280 11541 MT
(A 002 READER)SH
14280 12572 MT
(T 005 TESTFILE)SH
11880 14227 MT
(])SH
/Times-Roman SF
8280 16619 MT
(When Kermit-65 is receiving a file, the file it creates on diskette will be of the type)
86 W( indicated by the FILE-TYPE)87 W
8280 17815 MT
(parameter. The)
412 W( file will always be left in an unlocked state after it is closed by Kermit-65. When sending a)
81 W( file,)80 W
8280 19011 MT
(Kermit-65 will use the FILE-TYPE parameter to determine how to detect)
163 W( an End-of-file condition. Thus, it is)164 W
8280 20207 MT
(important to have this set properly in all cases.)SH
/Times-Bold SF
10280 22485 MT
(Recommendations for Archiving Files)SH
/Times-Roman SF
8280 24877 MT
(When using a large system for)
14 W( archiving purposes, there is no reason to convert Apple Basic programs into text files)13 W
8280 26073 MT
(before sending them if there is no need to edit them on the mainframe. The)
36 W( FILE-TYPE parameter must always be)37 W
8280 27269 MT
(set correctly when sending and receiving files. The procedure for archiving files is:)SH
10280 29060 MT
(1.)SH
11280 XM
(Run Kermit on remote system.)SH
10280 30718 MT
(2.)SH
/Courier SF
11280 XM
(SET FILE-TYPE TEXT)SH
/Times-Roman SF
22330 XM
(\050)SH
/Times-Italic SF
(or)SH
/Courier SF
24152 XM
(APPLESOFT)SH
/Times-Italic SF
30152 XM
(or)SH
/Courier SF
31641 XM
(...)SH
/Times-Roman SF
(\051 on Kermit-65.)SH
10280 32376 MT
(3.)SH
11280 XM
(Send the files.)SH
14 /Times-Bold AF
8280 35978 MT
(1.3. The PRODOS File System)SH
10 /Times-Roman AF
8280 38096 MT
(The PRODOS system is essentialy the same as the DOS system with the exception that performance has)
170 W( been)169 W
8280 39292 MT
(improved, hardware usage has)
176 W( been expanded and file names have different syntax. File names are the major)177 W
8280 40488 MT
(importance to the Kermit system. File names have the following syntax:)SH
/Courier SF
10680 42143 MT
(/volname/subdirectory1/.../subdirectoryn/filename)SH
/Times-Roman SF
8280 43860 MT
(where "volname")
21 W( is the volume name where the file is located. Subdirectory\050n\051 is a subdirectory on the volume and)20 W
8280 45056 MT
(may be omitted. Filenames are much more restrictive than DOS filenames.)
66 W( PRODOS)
383 W( filenames are limited to 15)67 W
8280 46252 MT
(characters with no imbedded spaces and few special characters, and must begin with an alphabetic character.)219 W
8280 47448 MT
(/volname/sub ... may be omited from the filename by use of the SET PREFIX command.)SH
8280 49840 MT
(Binary file transfer using PRODOS has its dangers when creating new)
120 W( files. PRODOS keeps the file's size and)121 W
8280 51036 MT
(starting location in the directory which is)
12 W( of course not transferred. Therefore a new binary file will have its starting)11 W
8280 52232 MT
(location 0 which)
42 W( can cause some interesting problems if you try and BRUN the file. Basic files all start at $801 \050it)43 W
8280 53428 MT
(says here\051 so Kermit creates new basic files with a starting address of $801.)SH
14 /Times-Bold AF
8280 57030 MT
(1.4. Program Operation)SH
10 /Times-Roman AF
8280 59148 MT
(Prior to using Kermit-65 for transferring files, the modem interface must be set)
59 W( to handle data in a certain manner.)58 W
8280 60344 MT
(First, the data format should be 8 data)
11 W( bits and 1 stop bit. Second, the card should be set to no parity. The baud rate)12 W
8280 61540 MT
(\050if adjustable\051 must be set to whatever rate the)
209 W( modem can handle. For the D.C. Hayes Micromodem, these)208 W
8280 62736 MT
(parameters are set correctly by default, so very little has to be)
54 W( done. For the Apple Super Serial Card these are set)55 W
8280 63932 MT
(from within Kermit-65)
112 W( except the interrupt switch \050sw6-2\051 which must be set for interupts on. For the Microtek)111 W
8280 65128 MT
(SV-622, all applicable parameters are set by Kermit-65. Some mainframes may need parity checking)
SH( \050i.e. most IBM)1 W
8280 66324 MT
(machines\051. In)
798 W( this case some parity setting \050other than none\051 will usually work. When talking with such)273 W
8280 67520 MT
(mainframes, binary and basic files on the Apple cannot be transferred)
38 W( unless Eighth-bit-quoting is acceptable to the)39 W
8280 68716 MT
(host. If)
500 W( you have the parameters set correctly)
125 W( then the "CONNECT" command will start Kermit talking out the)124 W
8280 69912 MT
(communication port.)SH
ES
%%Page: 4 5
BS
0 SI
10 /Times-Italic AF
6120 4404 MT
(Page 4)SH
12 /Times-Bold AF
32217 XM
(Kermit User Guide: Apple II Kermit 1.4)SH
46800 50 6120 5709 UL
10 /Times-Roman AF
6120 7886 MT
(File transfer is very dependent upon parity. Make sure the host and)
15 W( local parity are the same. Following are a couple)16 W
6120 9082 MT
(of site's method for file transfer.)SH
6120 11474 MT
(We have an IBM 3033 and 4381 and use both 3705/3725 and 7171 or Series/1 front ends.)
44 W( The)
336 W( differences in front)43 W
6120 12670 MT
(ends as far as any microcomputer Kermit is concerned duplex \050local-echo on)
108 W( for the 3705, local-echo off for the)109 W
6120 13866 MT
(7171 or Series/1\051, parity \050the two front ends might use different parity, e.g. Mark for the 3705 and Even for)
121 W( the)120 W
6120 15062 MT
(7171\051, and flow control \050None for the 3705, XON/XOFF for the 7171\051.)SH
6120 17454 MT
(In Kermit-65, IBM mainframe users need to set the following parameters:)SH
8120 19245 MT
(BAUD)SH
16120 XM
(Whatever is supported.)SH
8120 20903 MT
(PARITY)SH
16120 XM
(EVEN, ODD, or MARK, whatever your front end requires.)SH
8120 22561 MT
(FLOW)SH
16120 XM
(XON for the 7171, NONE for the 3705.)SH
8120 24219 MT
(FLOW DELAY)SH
16120 XM
(00)SH
8120 25877 MT
(LOCAL-ECHO)SH
16120 XM
(OFF for 7171, ON for 3705)SH
6120 28269 MT
(In Kermit-65, SERDAC VAX 8800 users need to set the following parameters:)SH
8120 30060 MT
(BAUD SERDAC Dial-up & 300, 1200, or)
47 W( 2400 baud FIRN Dialup: \050the highest your modem and the dial-up)48 W
16120 31165 MT
(connection will support\051)SH
8120 32823 MT
(Ethernet Hardwire: 300, 1200, 2400, or 4800 baud.)SH
8120 34481 MT
(PARITY NONE)SH
8120 36139 MT
(FLOW XON)SH
8120 37797 MT
(FLOW DELAY 00 \050higher for printers, logging, or "slow" Apples\051)SH
8120 39455 MT
(LOCAL-ECHO OFF)SH
8120 41113 MT
(NOTE: If you want to do a binary file transfer \050Apple binary or BASIC files\051 via a FIRN Network connection)44 W
16120 42218 MT
(to the SERDAC VAX 8800, you must SET PARITY SPACE before the)
288 W( transfer is)289 W
16120 43323 MT
(initiated; that will insure that eight-bit quoting is used.)
87 W( If)
422 W( you dial directly into the VAX)86 W
16120 44428 MT
(8800, SET PARITY NONE; eight-bit quoting \050which is less efficient\051 is not required.)SH
/Times-Bold SF
8120 46706 MT
(Conversing With Kermit-65)SH
/Times-Roman SF
6120 49098 MT
(Kermit-65 reads file)3 W
/Courier SF
14488 XM
(KERMIT.INIT)SH
/Times-Roman SF
21341 XM
(from the default drive when started.)
3 W( The)
258 W( lines of this file are executed one at a)4 W
6120 50294 MT
(time starting at the begining. This file should be an ASCII text file)
153 W( and contain commands to set up Kermit's)152 W
6120 51490 MT
(parameters as desired. It will also execute Kermit's other commands. However, any)
71 W( command which reads a file)72 W
6120 52686 MT
(\050like MODEM\051 or leaves local mode)
138 W( \050like CONNECT\051 will terminate reading of this file and continue with the)137 W
6120 53882 MT
(command specified. Use your favorite editor to produce this file. Here's a sample:)SH
/Courier SF
8520 55537 MT
(set display 80 3)SH
8520 56568 MT
(set keyboard 2e)SH
8520 57599 MT
(set baud 4800)SH
8520 58630 MT
(modem)SH
/Times-Roman SF
6120 61022 MT
(Kermit-65's prompt is ")162 W
/Courier SF
(Kermit-65>)SH
/Times-Roman SF
(". To)
574 W( run Kermit-65 and issue commands to it, type ")162 W
/Courier SF
(brun kermit)163 W
/Times-Roman SF
(".)SH
6120 62218 MT
(Example:)SH
/Courier SF
8520 63873 MT
(]BRUN KERMIT)SH
6600 50 9120 64073 UL
8520 65528 MT
(NOSC/STEVENS/CU - APPLE ][ KERMIT-65 - VER 3.86)SH
8520 67183 MT
(Kermit-65>send testfile)SH
7800 50 14520 67383 UL
/Courier-Oblique SF
10920 68838 MT
(\050file is sent...\051)SH
/Courier SF
8520 70493 MT
(Kermit-65>status)SH
3600 50 14520 70693 UL
ES
%%Page: 5 6
BS
0 SI
12 /Times-Bold AF
8280 4404 MT
(1.4. Program Operation)SH
10 /Times-Italic AF
52275 XM
(Page 5)SH
46800 50 8280 5709 UL
/Courier-Oblique SF
13080 7824 MT
(\050performance statistics are printed...\051)SH
/Courier SF
10680 9479 MT
(Kermit-65>)SH
/Courier-Oblique SF
(\050other commands...\051)SH
11400 50 16680 9679 UL
/Courier SF
16680 10510 MT
(.)SH
16680 11541 MT
(.)SH
16680 12572 MT
(.)SH
10680 13603 MT
(Kermit-65>exit)SH
2400 50 16680 13803 UL
10680 14634 MT
(])SH
/Times-Roman SF
8280 17026 MT
(Like many Kermit programs, Kermit-65 uses a DEC-20 style command parser. During interactive)
91 W( operation, you)90 W
8280 18222 MT
(may use the ?-prompting help feature \050"?"\051 and recognition \050ESC\051 features while typing commands. A)
104 W( question)105 W
8280 19418 MT
(mark typed at any point in a command)
62 W( displays the options available at that point; typing an ESC character causes)61 W
8280 20614 MT
(the current keyword to be completed \050or)
19 W( default value to be supplied\051. If you have not typed sufficient characters to)20 W
8280 21810 MT
(uniquely specify the keyword \050or if there is no default value\051 then a beep will be)
99 W( sounded and you may continue)98 W
8280 23006 MT
(typing. Keywords)
250 W( may be abbreviated to any prefix that is unique.)SH
/Times-Bold SF
10280 25284 MT
(Remote and Local Operation)SH
/Times-Roman SF
8280 27676 MT
(Kermit-65 is normally run in local mode. It)
12 W( may be run as a remote Kermit as well although there is no advantage to)13 W
8280 28872 MT
(doing things that way. Kermit-65 supports User-mode)
164 W( commands for talking to a Server, and it does support a)163 W
8280 30068 MT
(limited server mode.)SH
14 /Times-Bold AF
8280 33670 MT
(1.5. Kermit-65 Commands)SH
12 SS
8280 36786 MT
(1.5.1. The CATALOG Command)SH
10 /Times-Roman AF
8280 38728 MT
(Syntax:)SH
/Courier SF
11586 XM
(CATALOG)SH
/Times-Roman SF
8280 41120 MT
(Typing CATALOG produces a catalog \050directory\051 listing of your default drive.)SH
12 /Times-Bold AF
8280 44236 MT
(1.5.2. The CONNECT Command)SH
10 /Times-Roman AF
8280 46178 MT
(Syntax:)SH
/Courier SF
11836 XM
(CONNECT)SH
/Times-Roman SF
8280 48570 MT
(Establish a terminal connection)
45 W( to the remote system using all the current SET paramaters for terminal type, speed,)46 W
8280 49766 MT
(parity, etc. Get back to Kermit-65 by typing the escape character followed by the letter C. The escape)
56 W( character is)55 W
8280 50962 MT
(Control-)SH
/Courier SF
(@)SH
/Times-Roman SF
12561 XM
(by default.)
42 W( When)
335 W( you type the escape character, several single-character commands are possible. These)43 W
8280 52158 MT
(are shown in Table 1-2.)SH
8280 54550 MT
(You can use the SET ESCAPE)
93 W( command to define a different escape character. When CONNECTed, Kermit-65)92 W
8280 55746 MT
(will be passing characters entered)
109 W( on the keyboard to the remote system, and passing characters from the remote)110 W
8280 56942 MT
(system to the Apple screen. Incoming characters are interpreted according)
157 W( the selected terminal type \050see SET)156 W
8280 58138 MT
(TERMINAL\051.)SH
8280 60530 MT
(On an Apple II+ with an incomplete keyboard, special characters can be typed by prefixing)
9 W( regular characters with a)10 W
8280 61726 MT
(right-arrow. On)
494 W( uppercase-only screens, uppercase characters are shown in inverse and lowercase characters)
122 W( are)121 W
8280 62922 MT
(displayed as normal uppercase characters.)SH
8280 65314 MT
(Here are the rules for using the special 2/2+)
23 W( input, to get all printable ASCII characters, and how they appear on the)24 W
8280 66510 MT
(screen. Special)
468 W( meanings are applied in various contexts to)
109 W( certain characters. The left and right arrow keys do)108 W
8280 67706 MT
(special things, and sometimes the escape key does as well. For letters, the keyboard is always in either)
136 W( default)137 W
8280 68902 MT
(UPPERCASE mode or default lowercase mode. When in UPPERCASE, all)
38 W( letters typed are sent out as uppercase.)37 W
8280 70098 MT
(In lowercase, all letters are sent as lowercase. To reverse the case for the next character)
107 W( only, hit the right-arrow)108 W
8280 71294 MT
(\050"prefix"\051 key.)
31 W( To)
311 W( switch the default case, hit the prefix-key twice in a row. For funny characters, the prefix key is)30 W
ES
%%Page: 6 7
BS
0 SI
10 /Times-Italic AF
6120 4404 MT
(Page 6)SH
12 /Times-Bold AF
31317 XM
(Kermit User Guide: Apple II Kermit 1.5.2)SH
46800 50 6120 5709 UL
46800 50 6120 8086 UL
10 /Courier AF
8120 11001 MT
(?)SH
/Times-Roman SF
11120 XM
(List all the possible single-character arguments.)SH
/Courier SF
8120 12106 MT
(B)SH
/Times-Roman SF
11120 XM
(send a Break signal.)SH
/Courier SF
8120 13211 MT
(C)SH
/Times-Roman SF
11120 XM
(Command mode \050returning to kermit-65\051.)SH
/Courier SF
8120 14316 MT
(D)SH
/Times-Roman SF
11120 XM
(Drop the phone line to the remote and return to Kermit-65.)SH
/Courier SF
8120 15421 MT
(E)SH
/Times-Roman SF
11120 XM
(Erase the screen \050useful for clearing garbage on screen\051.)SH
/Courier SF
8120 16526 MT
(K)SH
/Times-Roman SF
11120 XM
(toggle Keypad application-mode on/off.)SH
/Courier SF
8120 17631 MT
(M)SH
/Times-Roman SF
11120 XM
(execute the Modem command.)SH
/Courier SF
8120 18736 MT
(Q)SH
/Times-Roman SF
11120 XM
(execute the Quit command.)SH
/Courier SF
8120 19841 MT
(P)SH
/Times-Roman SF
11120 XM
(toggle the Printer on/off.)SH
/Courier SF
8120 20946 MT
(R)SH
/Times-Roman SF
11120 XM
(pRint the screen, >= //e required)SH
/Courier SF
8120 22051 MT
(S)SH
/Times-Roman SF
11120 XM
(show Status of the connection.)SH
/Courier SF
8120 23156 MT
(W)SH
/Times-Roman SF
11120 XM
(sWap the del and backspace key.)SH
/Courier SF
8120 24261 MT
(0)SH
/Times-Roman SF
11120 XM
(send a null \050ASCII 0\051.)SH
/Courier SF
8120 25366 MT
(^@)SH
/Times-Roman SF
11120 XM
(\050or whatever the Connect-Escape character is\051: send the Connect-Escape character itself.)SH
/Times-Bold SF
15063 27157 MT
(Table 1-2:)SH
/Times-Roman SF
19924 XM
(Kermit-65 Single-Character CONNECT Escape Commands)SH
46800 50 6120 28967 UL
6120 30558 MT
(also used to get the unusual punctuation characters which are not on the Apple keyboard. Table 1-3)
136 W( shows the)137 W
6120 31754 MT
(Apple II/II+ keyboard escapes; the letter "p" represents the prefix character.)SH
46800 50 6120 33745 UL
8120 36660 MT
(To Get)SH
29720 XM
(Type)SH
36920 XM
(Appearence)SH
4555 50 8120 36860 UL
2055 50 29720 36860 UL
4775 50 36920 36860 UL
8120 37946 MT
(Left Square Bracket)SH
29970 XM
(p)SH
/Courier SF
(\050)SH
38720 XM
([)SH
/Times-Roman SF
8120 39232 MT
(Right Square Bracket)SH
29970 XM
(p)SH
/Courier SF
(\051)SH
38720 XM
(])SH
/Times-Roman SF
8120 40518 MT
(Left Curly Bracket)SH
29970 XM
(p)SH
/Courier SF
(<)SH
38720 XM
({)SH
/Times-Roman SF
8120 41804 MT
(Right Curly Bracket)SH
29970 XM
(p)SH
/Courier SF
(>)SH
38720 XM
(})SH
/Times-Roman SF
8120 43090 MT
(Underline)SH
29970 XM
(p)SH
/Courier SF
(-)SH
38720 XM
(_)SH
/Times-Roman SF
8120 44376 MT
(Backslash)SH
29970 XM
(p)SH
/Courier SF
(/)SH
38720 XM
(\134)SH
/Times-Roman SF
8120 45662 MT
(Tilde \050wiggle\051)SH
29970 XM
(p)SH
/Courier SF
(^)SH
38720 XM
(~)SH
/Times-Roman SF
8120 46948 MT
(Vertical Line)SH
29970 XM
(p)SH
/Courier SF
(.)SH
38720 XM
(|)SH
/Times-Bold SF
20823 48739 MT
(Table 1-3:)SH
/Times-Roman SF
25684 XM
(Apple II/II+ Keyboard Escapes)SH
46800 50 6120 50549 UL
6120 52741 MT
(The left-arrow key sends a rubout \050ASCII 127\051. With left-arrow and right arrow)
94 W( doing special things, it's a little)93 W
6120 53937 MT
(hard to enter their characters)
20 W( \050)21 W
/Courier SF
(^H)SH
/Times-Roman SF
19715 XM
(and)SH
/Courier SF
21430 XM
(^U)SH
/Times-Roman SF
22901 XM
(respectively\051. There)
292 W( is therefore an escape from prefix mode sequence. If)21 W
6120 55133 MT
(you type prefix-ESC, the next character is sent without any interpretation. If you)
2 W( have the capability for upper/lower)1 W
6120 56329 MT
(case, etc, then use the 'SET KEYBOARD' and 'SET DISPLAY' commands to specify complete keyboards.)SH
6120 58721 MT
(While in connect mode if you have a //e or better with 80 column display, the cursor will blink.)
36 W( The rate of blink is)37 W
6120 59917 MT
(tied to the "SET TIMING" constant.)SH
12 /Times-Bold AF
6120 63033 MT
(1.5.3. The DELETE Command)SH
10 /Times-Roman AF
6120 64975 MT
(Syntax:)SH
/Courier SF
9426 XM
(DELETE)SH
/Times-Italic SF
13626 XM
(filespec)SH
/Times-Roman SF
6120 67367 MT
(Typing DELETE causes the file specified to be deleted.)SH
ES
%%Page: 7 8
BS
0 SI
12 /Times-Bold AF
8280 4404 MT
(1.5.4. The EXIT and QUIT Commands)SH
10 /Times-Italic AF
52275 XM
(Page 7)SH
46800 50 8280 5709 UL
12 /Times-Bold AF
8280 8004 MT
(1.5.4. The EXIT and QUIT Commands)SH
10 /Times-Roman AF
8280 9946 MT
(Syntax:)SH
/Courier SF
11586 XM
(EXIT)SH
/Times-Italic SF
14586 XM
(or)SH
/Courier SF
16075 XM
(QUIT)SH
/Times-Roman SF
8280 12338 MT
(Exit from Kermit-65. When using dos 3.3 you can probably restart the)
38 W( program, provided you haven't run anything)37 W
8280 13534 MT
(else, by typing 'CALL 4096'.)SH
12 /Times-Bold AF
8280 16650 MT
(1.5.5. The GET Command)SH
10 /Times-Roman AF
8280 18592 MT
(Syntax:)SH
/Courier SF
11586 XM
(GET)SH
/Times-Italic SF
13986 XM
(remote-filespec)SH
/Times-Roman SF
([,)SH
/Times-Italic SF
(local-filespec)SH
/Times-Roman SF
(])SH
8280 20984 MT
(The GET command requests a remote Kermit server to send the file or file group specified)
19 W( by)20 W
/Times-Italic SF
46347 XM
(remote-filespec)SH
/Times-Roman SF
(. This)290 W
8280 22180 MT
(command can be used with a Kermit server on the other end. The remote filespec is any string)
62 W( that can be a legal)61 W
8280 23376 MT
(file specification for the remote system; it is not parsed or)
153 W( validated locally. So if the remote Kermit supports)154 W
8280 24572 MT
(wildcards you can specify them in the)101 W
/Times-Italic SF
24401 XM
(remote-filespec)SH
/Times-Roman SF
(. Local-filespec)
452 W( is optional and is the file name to be used)101 W
8280 25768 MT
(locally. If)
386 W( the remote Kermit is not capable of server functions, then you will probably)
68 W( get an error message back)69 W
8280 26964 MT
(from it like "Illegal packet type". In this case, you must connect to the other Kermit, give a SEND)
1 W( command, escape)SH
8280 28160 MT
(back, and give a RECEIVE command.)
21 W( Currently,)
293 W( a packet can be retransmitted manually by typing anything on the)22 W
8280 29356 MT
(keyboard. If a 'Q' is typed, the entire transmission will be cancelled.)SH
12 /Times-Bold AF
8280 32472 MT
(1.5.6. The HELP Command)SH
10 /Times-Roman AF
8280 34414 MT
(Syntax:)SH
/Courier SF
11586 XM
(HELP)SH
/Times-Roman SF
8280 36806 MT
(Typing HELP alone prints a brief summary of the Kermit-65 commands.)SH
12 /Times-Bold AF
8280 39922 MT
(1.5.7. The LOCK Command)SH
10 /Times-Roman AF
8280 41864 MT
(Syntax:)SH
/Courier SF
11586 XM
(LOCK)SH
/Times-Italic SF
14586 XM
(filespec)SH
/Times-Roman SF
8280 44256 MT
(LOCK will file lock the given filespec on the default drive.)SH
12 /Times-Bold AF
8280 47372 MT
(1.5.8. The LOG Command)SH
10 /Times-Roman AF
8280 49314 MT
(Syntax:)SH
/Courier SF
11586 XM
(LOG)SH
/Times-Italic SF
13986 XM
(filespec)SH
/Times-Roman SF
8280 51706 MT
(When connected)
9 W( to a remote site, log the remote session's output to the specified file. The file type and file warning)8 W
8280 52902 MT
(protocols are observed. This command is dependent upon the flow control \050XON/XOFF\051 working. Without flow)100 W
8280 54098 MT
(control there is little)
125 W( possibility of getting a correct copy of the terminal session. The logging begins when you)124 W
8280 55294 MT
(connect to the remote and)
146 W( is terminated when you escape back to the local Kermit with the ESCAPE character)147 W
8280 56490 MT
(followed by the "C" command.)SH
12 /Times-Bold AF
8280 59606 MT
(1.5.9. The MODEM Command)SH
10 /Times-Roman AF
8280 61548 MT
(Syntax:)SH
/Times-Italic SF
11586 XM
(MODEM)SH
/Times-Roman SF
8280 63940 MT
(This command is designed for the)
82 W( hayes smart modem. Typing MODEM causes the file)81 W
/Courier SF
45218 XM
(KERMIT.MODEM)SH
/Times-Roman SF
52749 XM
(in the)81 W
8280 65136 MT
(default drive/path to be used as a menu. You will be able to select)
104 W( any line in the file to be sent to the modem.)105 W
8280 66332 MT
(Sorry, you can't back up to a previous)
82 W( menu, you will have to Quit and execute MODEM again. A "CONNECT")81 W
8280 67528 MT
(response from the smart modem will cause Kermit to leave)
175 W( the modem command and execute the CONNECT)176 W
8280 68724 MT
(command. The Hayes smart modem must reply with text status responses \050not numbers\051.)
95 W( One)
439 W( command per line)94 W
8280 69920 MT
(with comments allowed after the first space \050blank\051. Use your favorite editor to produce this ASCII text file.)
41 W( Since)333 W
8280 71116 MT
(the attention Hayes command \050AT\051 requires a delay the)
88 W( ``)87 W
/Courier SF
(&)SH
/Times-Roman SF
('' character becomes the time delay for Kermit. Each)87 W
ES
%%Page: 8 9
BS
0 SI
10 /Times-Italic AF
6120 4404 MT
(Page 8)SH
12 /Times-Bold AF
31317 XM
(Kermit User Guide: Apple II Kermit 1.5.9)SH
46800 50 6120 5709 UL
10 /Times-Roman AF
6120 7886 MT
(``)SH
/Courier SF
(&)SH
/Times-Roman SF
('' causes)
52 W( a delay of one second on a 6502 chip. If you have a //gs or an accelerator board you may have to use)53 W
6120 9082 MT
(the SET TIMING command to produce a one second delay. If you really need to send)
119 W( the "&" character to the)118 W
6120 10278 MT
(modem then the)
78 W( "\134" is the escape character. Put a "\134" before any character and that character will be sent as is. Of)79 W
6120 11474 MT
(course two "\134"'s will)
115 W( produce one "\134". Normally Kermit will wait for 27 seconds \050again on a 6502 chip\051 for the)114 W
6120 12670 MT
(modem to respond, but)
46 W( any character typed on the keyboard will terminate this wait. You may hear the busy signal)47 W
6120 13866 MT
(and there is no sense waiting any longer, so hit \050owch!-not so hard\051 any key on the keyboard.)SH
6120 16258 MT
(Following is an example of the)SH
/Courier SF
18786 XM
(KERMIT.MODEM)SH
/Times-Roman SF
26236 XM
(file:)SH
/Courier SF
8520 17913 MT
(+++&&ATH)SH
/Courier-Oblique SF
15720 XM
(Get the Hayes Smartmodem's attention and then hang up.)SH
/Courier SF
8520 18944 MT
(ATDP1234567)SH
/Courier-Oblique SF
15720 XM
(Call your local BBS with pulse dialing.)SH
/Courier SF
8520 19975 MT
(ATDT8901234)SH
/Courier-Oblique SF
15720 XM
(Call your work dialup phone with touch tone dialing.)SH
12 /Times-Bold AF
6120 23091 MT
(1.5.10. The RECEIVE Command)SH
10 /Times-Roman AF
6120 25033 MT
(Syntax:)SH
/Courier SF
9426 XM
(RECEIVE [)SH
/Times-Italic SF
(filespec)SH
/Courier SF
(])SH
/Times-Roman SF
6120 27425 MT
(The RECEIVE command tells Kermit-65 to receive a)
92 W( file or file group from the other system. If only one file is)91 W
6120 28621 MT
(being received, you)
81 W( may include the optional filespec as the name to store the incoming file under; otherwise, the)82 W
6120 29817 MT
(name is)
136 W( taken from the incoming file header. If the name in the header is not a legal filename, Kermit-65 will)135 W
6120 31013 MT
(attempt to change it into something legal.)
35 W( If)
322 W( FILE-WARNING is on and an incoming file has a name identical to a)36 W
6120 32209 MT
(file already existing on the diskette, Kermit-65 will issue a warning to the user and attempt)
3 W( to modify the filename to)2 W
6120 33405 MT
(make it unique. Currently, a packet can be retransmitted manually by typing anything)
46 W( on the keyboard. If a 'Q' is)47 W
6120 34601 MT
(typed, the entire transmission will be aborted. Filespec is required when xmodem protocol is used.)SH
12 /Times-Bold AF
6120 37717 MT
(1.5.11. The REMOTE Command)SH
10 /Times-Roman AF
6120 39659 MT
(Syntax:)SH
/Courier SF
9426 XM
(REMOTE [)SH
/Times-Italic SF
(option character-string)SH
/Courier SF
(])SH
/Times-Roman SF
6120 42051 MT
(The only option currently is "kermit".)
257 W( This command submits the command "character-string" to the remote)256 W
6120 43247 MT
(Kermit's command processor. Long replies are not paged)
157 W( so you will have to use ^S to stop the screen. The)158 W
6120 44443 MT
(obvious usage is for setting and showing parameters on the remote Kermit.)SH
12 /Times-Bold AF
6120 47559 MT
(1.5.12. The RENAME Command)SH
10 /Times-Roman AF
6120 49501 MT
(Syntax:)SH
/Courier SF
9426 XM
(RENAME)SH
/Times-Italic SF
13626 XM
(filespec)SH
/Times-Roman SF
(,)SH
/Times-Italic SF
(new-filespec)SH
/Times-Roman SF
6120 51893 MT
(RENAME will rename filespec to new-filespec on the default drive.)SH
12 /Times-Bold AF
6120 55009 MT
(1.5.13. The SEND Command)SH
10 /Times-Roman AF
6120 56951 MT
(Syntax:)SH
/Courier SF
9426 XM
(SEND)SH
/Times-Italic SF
12426 XM
(filespec)SH
/Times-Roman SF
([,)SH
/Times-Italic SF
(remote-filespec)SH
/Times-Roman SF
(])SH
6120 59343 MT
(The SEND command)
36 W( causes a file to be sent from the Apple to the remote system. The Filespec is the name of the)35 W
6120 60539 MT
(file on the Apple diskette to be sent. The parser)
17 W( will not accept control characters and certain special characters in a)18 W
6120 61735 MT
(filename \050like comma\051. Remote-filespec is optional and is the name)
2 W( of the file on the remote kermit. Thanks to Dick)1 W
6120 62931 MT
(Atlee, wildcards are now acceptable when sending files \050they have always been)
104 W( acceptable when receiving files\051.)105 W
6120 64127 MT
(The ``)SH
/Courier SF
(*)SH
/Times-Roman SF
('' is a multiple character wildcard and the ``)SH
/Courier SF
(=)SH
/Times-Roman SF
('' is a single character wildcard.)SH
6120 66519 MT
(The default disk drive is used for)
24 W( file transfers this can be changed with the 'SET DEFAULT-DISK'\050DOS\051 or 'SET)23 W
6120 67715 MT
(PREFIX'\050PRODOS\051 command \050explained below\051. As a file is being sent, the screen)
236 W( displays 'RECEIVING)237 W
6120 68911 MT
(NUMBER OF BYTES' and 'SENDING NUMBER OF BYTES')
169 W( followed by the hexidecimal number of bytes)168 W
6120 70107 MT
(transferred since start of transmission.)
92 W( If)
435 W( a packet must be transmitted several times and it reaches the maximum)93 W
6120 71303 MT
(retry count, the transfer will fail and the 'Kermit-65>' prompt will return. If the remote Kermit sends an)
168 W( error)167 W
ES
%%Page: 9 10
BS
0 SI
12 /Times-Bold AF
8280 4404 MT
(1.5.13. The SEND Command)SH
10 /Times-Italic AF
52275 XM
(Page 9)SH
46800 50 8280 5709 UL
/Times-Roman SF
8280 7886 MT
(packet, the text of the packet will be displayed on the)
151 W( screen, the transfer will fail, and the prompt will return.)152 W
8280 9082 MT
(Currently, a packet can be retransmitted manually by typing anything on the keyboard. If a 'Q' is typed, the entire)63 W
8280 10278 MT
(transmission will be aborted.)SH
12 /Times-Bold AF
8280 13394 MT
(1.5.14. The SERVER Command)SH
10 /Times-Roman AF
8280 15336 MT
(Syntax:)SH
/Courier SF
11586 XM
(SERVER)SH
/Times-Roman SF
8280 17728 MT
(Typing SERVER alone turns Kermit into a)
166 W( file server to a remote Kermit. Currently server mode will handle)167 W
8280 18924 MT
(remote "send", "get", "remote" and "fin" commands. Variants of the)
65 W( above commands will probably work but file)64 W
8280 20120 MT
(serving is very limited at present. Because the Apple requires knowledge of file types)
129 W( you can use the "remote)130 W
8280 21316 MT
(Kermit" \050or whatever the remote Kermit's syntax is\051 command to set the file-type on the server. Yes, the server)
9 W( will)8 W
8280 22512 MT
(execute any command so you can really get)
207 W( the server into trouble \050this is not a BBS\051. You must have the)208 W
8280 23708 MT
(appropiate file type set before transfering files.)
18 W( You)
285 W( can exit server mode by typing Control-C \050)17 W
/Courier SF
(^C)SH
/Times-Roman SF
(\051 when not doing)17 W
8280 24904 MT
(file transfers or the remote can of course terminate via the "fin" command.)SH
12 /Times-Bold AF
8280 28020 MT
(1.5.15. The SET Command)SH
10 /Times-Roman AF
8280 29962 MT
(Syntax:)SH
/Courier SF
11586 XM
(SET)SH
/Times-Italic SF
13986 XM
(parameter)SH
/Courier SF
18752 XM
([)SH
/Times-Italic SF
(option)SH
/Courier SF
22508 XM
([)SH
/Times-Italic SF
(value)SH
/Courier SF
(]])SH
/Times-Roman SF
8280 32354 MT
(Establish or modify various parameters for file transfer)
47 W( or terminal connection. You can examine their values with)48 W
8280 33550 MT
(the SHOW command. The following parameters may be SET:)SH
12848 36484 MT
(APPLICATION-MODE)SH
23430 XM
(Set VT100 gs keypad in/out of application mode.)SH
19847 37589 MT
(BAUD)SH
23430 XM
(Which baud rate should the com card use?)SH
12569 38694 MT
(CURSOR-KEYS-VT100)SH
23430 XM
(In VT100 mode cursor keys give VT100 sequences.)SH
16737 39799 MT
(DEBUGGING)SH
23430 XM
(TERSE or VERBOSE packet information.)SH
15459 40904 MT
(DEFAULT-DISK)SH
23430 XM
(Which Diskette drive is used for DOS 3.3 file transfer?)SH
18458 42009 MT
(DISPLAY)SH
23430 XM
(Which type of screen display is being used?)SH
18957 43114 MT
(ESCAPE)SH
23430 XM
(Character for terminal connection.)SH
17736 44219 MT
(FILE-TYPE)SH
23430 XM
(Type of Apple file being sent/received.)SH
15404 45324 MT
(FILE-WARNING)SH
23430 XM
(Warn users if incoming file exists?)SH
19847 46429 MT
(FLOW)SH
23430 XM
(Should xon/xoff flow control be used to the remote?)SH
17125 47534 MT
(KEYBOARD)SH
23430 XM
(II+ or //e keyboard.)SH
18625 48639 MT
(KEYPAD)SH
23430 XM
(Is there a gs keypad?)SH
16292 49744 MT
(LOCAL-ECHO)SH
23430 XM
(Full or half duplex switch.)SH
19069 50849 MT
(PARITY)SH
23430 XM
(Character parity to use)SH
19235 51954 MT
(PREFIX)SH
23430 XM
(Which default prefix to use with PRODOS?)SH
18513 53059 MT
(PRINTER)SH
23430 XM
(Should the printer be used for the display?)SH
17402 54164 MT
(PROTOCOL)SH
23430 XM
(Which protocol is to be used for file transfer.)SH
18458 55269 MT
(RECEIVE)SH
23430 XM
(Various parameters for receiving files)SH
20069 56374 MT
(SEND)SH
23430 XM
(Various parameters for sending files)SH
20180 57479 MT
(SLOT)SH
23430 XM
(Which slot # is communication device in?)SH
19569 58584 MT
(TIMER)SH
23430 XM
(Should Kermit observe the receive timeout value?)SH
18903 59689 MT
(TIMIMG)SH
23430 XM
(Change the time loop for 1 ms. delays.)SH
17514 60794 MT
(TERMINAL)SH
23430 XM
(Which type of terminal should Kermit emulate?)SH
/Times-Bold SF
10280 63072 MT
(SET APPLICATION-MODE)SH
/Times-Roman SF
8280 64838 MT
(Syntax:)SH
/Courier SF
11586 XM
(SET APPLICATION-MODE {ON, OFF})SH
/Times-Roman SF
8280 67230 MT
(For VT100 emulation with a gs keypad)
160 W( you can set the keypad in or out of application mode. Some computer)159 W
8280 68426 MT
(systems set this via escape sequences so it may not be necessary to use this command.)SH
/Times-Bold SF
10280 70704 MT
(SET BAUD)SH
ES
%%Page: 10 11
BS
0 SI
10 /Times-Italic AF
6120 4404 MT
(Page 10)SH
12 /Times-Bold AF
30717 XM
(Kermit User Guide: Apple II Kermit 1.5.15)SH
46800 50 6120 5709 UL
10 /Times-Roman AF
6120 7886 MT
(Syntax:)SH
/Courier SF
9426 XM
(SET BAUD)SH
/Times-Italic SF
14826 XM
(value)SH
/Times-Roman SF
6120 10278 MT
(Value is the baud rate for your communication card. For the super)
59 W( serial and the microtek it can be 300 to 19200.)60 W
6120 11474 MT
(The actual values will depend upon the com card you are running with.)SH
/Times-Bold SF
8120 13752 MT
(SET CURSOR-KEYS-VT100)SH
/Times-Roman SF
6120 16144 MT
(Syntax:)SH
/Courier SF
9426 XM