jim@jagmac2.gsfc.nasa.gov (Jim Jagielski) (09/14/90)
I have made available via anonymous ftp, the EtherPortII drivers for the
EtherPortII card. These drivers are for A/UX 1.1, but they do work under
2.0 as long as you use the card/interface ONLY for TCP/IP communication
(The Apple card will also support AppleTalk over EtherNet...these drivers
for the EPII won't!).
The file is a compressed tar archive called EPIIdr.tar.Z (or something VERY
close to that). The easiest way to install is to copy this file to /tmp
then uncompress and tar-extract the file:
$ mv EPIIdr.tar.Z /tmp
$ uncompress EPIIdr.tar.Z
$ tar xvf EPIIdr.tar
Then install by "csh install.script"
Please read the AUX_README file which is included!
And please send me Email if you have any problems!
--
=======================================================================
#include <std/disclaimer.h>
=:^)
Jim Jagielski NASA/GSFC, Code 711.1
jim@jagmac2.gsfc.nasa.gov Greenbelt, MD 20771
"Kilimanjaro is a pretty tricky climb. Most of it's up, until you reach
the very, very top, and then it tends to slope away rather sharply."