jim@jagmac2.gsfc.nasa.gov (Jim Jagielski) (10/01/90)
I have just finished removing the old (1.1) drivers for the Intel EtherPortII card (as well as removing the card) and installing the "new" National Ether- PortII card and the 2.0 drivers from Dayna. At 1st glance, everything looks fine and works normally... supposedly the new card boosts "higher" performance than the old one, but I haven't noticed any performance change... I am using the card only for TCP/IP traffic, so I don't know how it's support for EtherTalk is. I'll keep all informed. -- ======================================================================= #include <std/disclaimer.h> =:^) Jim Jagielski NASA/GSFC, Code 711.1 jim@jagmac2.gsfc.nasa.gov Greenbelt, MD 20771 "Kilimanjaro is a pretty tricky climb. Most of it's up, until you reach the very, very top, and then it tends to slope away rather sharply."