root@theporch.raidernet.com (Phillip Porch) (05/07/91)
I recently upgraded to a mac fx. I have a rodime 144 Meg HD internal and a quantum 210 Meg HD external. I have the scsi filter installed on the rodime drive (supplied with the upgrade package) and a black terminator on the lat device in the scsi chain. I have had times of getting a bus error at the point in the a/ux boot where it would normally say loading. It has bee as bad as having to reboot up to 8 times to get a start, and recently, I have rebooted 4 or 5 times in a row without a hitch. I put macsbug 6.2 in the startup drive system folder (Quantum) and find that it dies in one place every time. I get the following message from macsbug: Bus Error @ 4080A2D4 _VRemove+0054 while reading word from 6DB6DB77 in Supervisor data space. The machine is still in a 24 bit memory mode at that point. Does anyone have any idea what is going on? Recently, I attached another drive to my system and had to move the scsi cables after doing that, I have only had one bus error show up in about 5 reboots. Any thoughts and comments would be appreciated. I will post a summary of the information at a later date. -- Phillip Porch (root@theporch.raidernet.com) UUCP !uunet!mjbtn!raider!theporch!root Compuserve 70206,572 Genie PPORCH