morrison@ccs.carleton.ca (Greg Morrison) (06/21/91)
I asked for help (not yet having the system admin manual) in printing to an epson-compatable printer under A/UX 2.01. Several replies pointed me in the right direction, by suggesting recourse to the Berkeley Unix lpr/printcap system. I added the following lines to /etc/printcap: generic_epson:fs#06020:fc#0300:xs#040: # Bull printer in SSRB108 ssrb108:\ :lp=/dev/modem:br#9600:sd=/usr/spool/lpd/ssrb108:\ :pl#64:tc=generic_epson: and created the spooling directory /usr/spool/lpd/ssrb108. Basically, this did the trick, though I found that, as one of my correspondants pointed out, I had to use the modem port instead of the printer port. My thanks to: marcelo%deadzone@Princeton.EDU (Marcelo Gallardo) paul@halserv2.hal.com (Paul Sander) murphy@hao.ucar.edu (Graham Murphy) lamarche@ireq.hydro.qc.ca (Louis Lamarche) -- Greg Morrison | morrison@ccs.carleton.ca Computing and Communications Services | phone: (613) 788-2507 Carleton University | fax: (613) 788-4448 Ottawa, Ontario, Canada K1S 5B6 |