nor1675@dsacg2.UUCP (Michael Figg) (08/04/88)
I have just purchased the TxEd Plus package and although it looks good, I have had problems getting FF to work on other disks, including the systems disk I am putting together for TxEd. FF seems to work fine on the orginal (backup) disk but would not work as a command (after booting) on the systems disk, but would work fine if put in the startup-sequence. I also tried to put this in my Lattice 4.0 boot disk (I can't wait for a hard drive to get away from so many enviroments) and it would not work anywhere. What I get from FF is "can't find font" twice, which I assume is for replacements for both the topaz 8 and topaz 9 fonts. I am executing "FF Siesta.font" and have copied the Siesta directory and Siesta.font to Lattice 4.0.1:fonts. Also out of curiosity, the Lattice fonts directory is empty, doesn't even have the default topaz fonts in it, although I have no problem getting them. Both TxEd Plus and my system disk are ARP'd and I think I have done the same to my Lattice boot but I don't remember. I wouldn't think it would make a difference. Thanks for any help! -- "Better graphics with crayons" Michael Figg DLA Systems Automation Center Columbus, Oh. (614)-238-9036