ddave@pnet02.cts.com (David Donley) (02/26/89)
What type of special stuff do you need to do to be able to use a Trailblazer
19200 baud modem?
UUCP: {ames!elroy, <backbone>}!gryphon!pnet02!ddave
INET: ddave@pnet02.cts.commwm@eris.berkeley.edu (Mike (I'll think of something yet) Meyer) (03/03/89)
In article <12543@gryphon.COM> ddave@pnet02.cts.com (David Donley) writes:
<What type of special stuff do you need to do to be able to use a Trailblazer
<19200 baud modem?
Nothing. I've been running with one for nearly a year. Kermit at 19.2
with both modems in kermit mode moves a lot of data quickly.
The one thing to watch out for:
If you lock the modem<->terminal interface at speeds less than 19.2
(say, 9600), you will sometimes have problems with handshaking when
the modem is trying to run at 19.2 in interactive mode.
I have as yet to try it running uucp (my uucp connections use there
Trailblazers for SLIP), or SLIP.
<mike
--
How many times do you have to fall Mike Meyer
While people stand there gawking? mwm@berkeley.edu
How many times do you have to fall ucbvax!mwm
Before you end up walking? mwm@ucbjade.BITNET