jdutka@wpi.wpi.edu (John Dutka) (02/28/89)
Does anyone out there have any suggestions for a good, relatively inexpensive accelerator board for my A500? I already have a hard drive on the bus located on the left side of my 500, and I've heard CMI's board is pretty defective. +--------------------------+----------------------+--------------------------+ | John A. Dutka (jdutka) | . . . .____. . | jdutka@wpi.bitnet | | Worcester Polytechnic | | | | | | | | jdutka@wpi.wpi.edu | | WPI Box 2308 | | | | |____| | | | | 100 Institute Road | | | | | | +--------------------------+ | Worcester, MA 01609-2280 | |__|__| | | | WPI - Home of the | | (508) 792-1949 | (C) 1989, Chris Moir | ever-growing tuition. | +--------------------------+----------------------+--------------------------+
paolucci@snll-arpagw.UUCP (Sam Paolucci) (03/01/89)
In article <1094@wpi.wpi.edu> jdutka@wpi.wpi.edu (John Dutka) writes:
->
->Does anyone out there have any suggestions for a good, relatively inexpensive
->accelerator board for my A500? I already have a hard drive on the bus
->located on the left side of my 500, and I've heard CMI's board is pretty
->defective.
This is a perfect example of something that should be in comp.sys.amiga.
Can you please only post articles of technical nature in comp.sys.amiga.tech!
--
-+= SAM =+-
"the best things in life are free"
ARPA: paolucci@snll-arpagw.llnl.govcollins@pnet02.cts.com (Steven Collins) (03/04/89)
For the record, I have a CMI board in my 1000 and have never had any
problems with it in any way. I am very pleased with it and with
the support I received from CMI while adding a 68881 coprocessor.
steve collins :^)}
UUCP: {ames!elroy, <backbone>}!gryphon!pnet02!collins
INET: collins@pnet02.cts.com