efeustel@eriador.prime.com (04/11/89)
I have been having difficulty getting a Mastor 3280 drive to work with a Microbotics Hardframe at driver level 1.53. The Format utility works fine after the second time it is used. The first time, it can't find any disks. The PREP utility works fine any time it is used. The Park utility works fine any time. My problem is with the driver. If the disk is on when I turn on the power (autoboot is not selected on the Hardframe), the system Gurus in binddrivers. If the disk is off when I turn on the power, the system hangs in binddrivers and when the disk is turned on, the task stays stuck in binddrivers. If I look at debug output I get RETRY BUSY UNIT just before the GURU or the hang. If I set Mounttime=-1, I get through bind drivers, but the drive is not mounted properly. I have tried this with both 1.2 and 1.3 boot roms. A friend has a 3280 which he uses with an A2090 with great success. Anyone have a similar problem? Can anyone help? Ed Feustel eaf@primerd.prime.com (508)-879-2960x3846