dirks@kaa.eng.ohio-state.edu (William R.Dirks) (11/08/89)
A while back I asked the good folks of comp.sys.amiga.tech for help getting my LUCAS working. Well, this afternoon I finally got it working, and I am soooo pleased! :-) :-) Thanks again to those who responded; you know who you are! :-) The problem was a bad 68020. It fooled me into thinking it was OK by flashing the power light before it hung up. 1/2 :-) I got the 68020 (and it's replacement) from Krueger, BTW. That was the only problem I had with LUCAS (if you don't count playing with U9). This evening I installed FRANCES and it's working fine. |-) But LUCAS doesn't work with my Alegra, so: 2 Megabyte Alegra For Sale --- US$250.00 or best offer. If you're not familiar with the Alegra: . Goes on A1000 side expansion connector . NO PASS THROUGH . Auto-config, no wait-state . Sturdy, compact metal case: flush with Amiga case at the top, bottom and rear. Comes forward to just behind the rear joystick port. About 1/2 inch thick. I'll pay for shipping. Just tell me where to send it. :-) Respond via E-mail. -=- Bill Dirks ...a large iron bar suspended across a vast dirks@kaa.eng.ohio-state.edu multitude of grapes...