pyr464@psc90.UUCP (Fred Slama) (12/02/89)
From unhd!uunet!mcsun!unido!tub!fauern!fauern!immd4.informatik.uni-erlangen.de!mlelstv Fri Dec 1 11:08:22 EST 1989 Article 35609 of comp.sys.amiga: Path: psc90!unhd!uunet!mcsun!unido!tub!fauern!fauern!immd4.informatik.uni-erlangen.de!mlelstv >From: mlelstv@immd4.informatik.uni-erlangen.de (Michael van Elst ) Newsgroups: comp.sys.amiga Subject: Re: Copper Demos... Message-ID: <615@medusa.informatik.uni-erlangen.de> Date: 28 Nov 89 12:32:00 GMT References: <773@crash.cts.com> Organization: IMMD IV, University of Erlangen, W-Germany Lines: 13 bobl@pro-graphics.cts.com (Bob Lindabury) writes: >toggle switch to jumper J102 and toggle between PAL and NTSC video (when >powered off) and view the demo in it's full glory. Switching between PAL and NTSC while still *POWERED ON* successfully D A M A G E S the chip. Just a warning. Michael van Elst E-mail: UUCP: ...uunet!unido!fauern!immd4!mlelstv QUESTION: What, if any, harmful side affects could this cause. By toggling (when powered down) and powering on in "PAL mode" what will the result be?; a raising of the screen itself? -Fred