[comp.sys.amiga.tech] NEC-drive in 1010-housing

euawtg@euas16.ericsson.se (Per-Erik Westerberg) (12/12/89)

My 1010-drive broke down and I got a NEC-drive (PC 720k) to replace it.
All but "DiskChange" works well, WHY? What is wrong?

--- Per-Erik Westerberg
    IBM         : EUAWTG at EUAA (Ellemtel AB Sweden)
    USENET(UN*X): euawtg@euas16.ericsson.se
    USENET(FIDO): Per-Erik_Westerberg@f204.n202.z2.pclink.se

collins@pnet02.gryphon.com (Steven Collins) (12/14/89)

I have built a 2 drive amiga external setup using NEC (ibm...) 3.5 drives.
The trick to get disk change to work is setting a jumper on the drive.
If I remember correctly, I had to solder a wire jumper in one place...
I can find out the exact jumper if it's not obvious. (the setup is at home...)
                                      steve


UUCP: {ames!elroy, <backbone>}!gryphon!pnet02!collins
INET: collins@pnet02.gryphon.com