peg@psuecl.bitnet (PAUL E. GANTER) (01/11/90)
HELP HELP HELP HELP HELP HELP HELP I just got a Panasonic C1391 Multisync monitor for my Amiga 2000. I ground down my 25 pin DSUB, threw together a cable, and no video. I switched the connections around (the Panasonic manual is rather unclear about pin numbering)--still no video. I used my old 1084 monitor cable, plugged it into a DIN connector, and attached that via a breadboard to the video in of the monitor. After trying various combinations--no video. I finally connected the blue signal of the 2000 to the blue in of the monitor, the composite sync of the 2000 to the composite sync of the monitor. The blue pin is the same whether the Pansonic manual is right or not--I tried both possible sync pins. No video. I tried the monitor on an EGA card--it works. Does anyone have any suggestions? I have no idea what to try next. Please E-mail if possible! Paul