ajahn@digi.lonestar.org (Alfredo Jahn) (07/10/90)
I have a RAM memory test program (supplied by GVP) which can be used to
test memory. My question is: If I have a 5 meg machine (A2000 with 1
meg on the mother board, a 2 meg amiga board and a GVP controller with
2 meg on it) what starting and ending address do I give the ram test
program so that all of ram gets tested. Here is what GVP told me to
do to test the 2 meg on the GVP controller...
1) boot and press ctrl-d before the FastMemFirst gets executed
2) test mem starting at 230000 and ending at 3fffff.
Is it possible to test starting at 0000000 ?? Where is the OS loaded?
Will I crash the system if I start that low?
Please reply via email at my "home" node:
alfredo@ajahnv.lonestar.org
Thanks in advance...
- alfredo jahn
--------------------------------------------------------------------------
Alfredo Jahn V, DSC Communications UUCP: {uunet,texbell}!digi!ajahn
1000 Coit Road Internet: ajahn@!digi.lonestar.org
Plano, TX 75075 Voice: 214-519-3545 Home: alfredo@ajahnv.lonestar.org
--------------------------------------------------------------------------