d87-khd@sm.luth.se (Karl-Gunnar Hultland) (09/25/90)
The program UUCICO (made by Matt Dillon) gives me a system failure #80000003 after a while. It connects and transfers files and before getty gets a chance to unpack then the dreaded system failure (former known as GURU) appears craching my machine. I have a 3000/25/50 with kick 36.143 and WB 36.68. 1Mb Chipmem 1Mb Fast 32 bit 2Mb Fast 16 bit (I have tried without it too) Anyone else having any problems with UUCICO? Karl --- Karl Hultland,(d87-khd@sm.luth.se) University of Lulea,Sweden Revolution: in politics, an abrupt change in the form of misgovernment. - A. Bierce
dillon@overload.Berkeley.CA.US (Matthew Dillon) (09/26/90)
>In article <1135@tau.sm.luth.se> d87-khd@sm.luth.se (Karl-Gunnar Hultland) writes: > >The program UUCICO (made by Matt Dillon) gives me >a system failure #80000003 after a while. > >It connects and transfers files and before getty gets a chance to >unpack then the dreaded system failure (former known as GURU) >appears craching my machine. > >I have a 3000/25/50 with kick 36.143 and WB 36.68. > >1Mb Chipmem >1Mb Fast 32 bit >2Mb Fast 16 bit (I have tried without it too) > >Anyone else having any problems with UUCICO? > Karl There are two bugs, one of which has been fixed but not distributed over the USENET. The first involves a crash during reception, and the second after reception is complete just before running uuxqt. The first has been found but the second is still unknown... it has something to do with data comming in when at the same time uucico closes and reopens the serial device to drop DTR. The next AmigaUUCP release is slated for December/January some time due to my work load. Until then you might want to use the 1.05D UUCico. -Matt -- Matthew Dillon dillon@Overload.Berkeley.CA.US 891 Regal Rd. uunet.uu.net!overload!dillon Berkeley, Ca. 94708 USA