goldfarb.ucf-cs@rand-relay.arpa (04/08/83)
I had a very fruitful conversation with Mike Gifford of Gifford Computer Systems (nee G & G Engineering) today. All of my CPU-68K and CP/M-68K problems will soon be resolved. For anyone wanting to purchase Godbout equipment and be properly supported (both hardware and software), I highly recommend going to Gifford Engineering. Dealing with Byte Industries, Priority One, and CompuPro is a waste of time. Thanks to all who suggested talkinng with Mike, who can be contacted at: Gifford Computer Systems 1922 Republic Avenue San Leandro, CA 94577 (415) 895-0798 ------ Ben Goldfarb uucp: duke!ucf-cs!goldfarb ARPA: goldfarb.ucf-cs@Rand-Relay
POURNE%mit-mc@sri-unix.UUCP (04/13/83)
From: Jerry E. Pournelle <POURNE@mit-mc> G&G is certainly a good outfit to work with. Priority One is fine for discount stuff when you KNOW what you want and know more or less what can or cannot go wrong with it. Incidentally, they have found a m ajor bug in the 68000 board at Godbout and are stripping all the boards and doing things to them. So says Tony anyway. Those who bought earlier copies should swap them out when they've got the bug fixed. I have cpm 68K for the SAGE but have not turned it on yet..