ASTA@DULRUU51.BITNET (Allgemeiner Studentenausschuss Universitaet Ulm) (10/10/90)
Hello VMS & 48 users,
I'm having trouble to connect my 48 to my VAX with Kermit. Neither sending
nor receiving is possible. The 2 computers just ignore themselves, though
I can use them both with an IBM PC.
Any hints?
The 48-I/O setup is:
wire / ASCII / 9600 / parity 4 spc / checksum 1 / translation 3
VMS Kermit-32 version 3.3.117
Kermit-32>show all
Block check type One character checksum
Debugging OFF
Delay 5 (sec)
Server sends NAKs every 75 seconds while waiting for a command
Escape character 035 (octal)
File type ASCII
File naming Normal form
Handshaking character None
Incomplete file disposition Discard
Line used _RTA1:
Local echo OFF
Parity type Space
Retry maximums
Initial connection 5 (dec)
Sending a packet 16 (dec)
Send parameters
Packet length 80 (dec)
Padding length 0 (dec)
Padding character 000 (octal)
Time out 15 (sec)
End of line character 015 (octal)
Quoting character 043 (octal)
Start of packet 001 (octal)
Receive parameters
Packet length 80 (dec)
Padding length 0 (dec)
Padding character 000 (octal)
Time out 15 (sec)
End of line character 015 (octal)
Quoting character 043 (octal)
8-bit quoting character 046 (octal)
Start of packet 001 (octal)
Transmit parameters
Delay 0.0 (sec)
Echo OFF
Repeat quoting character 176 (octal)
(I also tried it with parity none)
------------------------------------------------------------------------------
Ulli Horlacher # Student consultant VAX/VMS and networks # University of Ulm
orakel@dulruu51.bitnet # orakel@rz.uni-ulm.dbp.de # orakel@rz.uni-ulm.de
"With mainframes you just can do nonsense, with PCs not even that."
------------------------------------------------------------------------------