jcardozo@polyslo.CalPoly.EDU (Jonathan Cardozo) (10/20/90)
I am looking for a connector for the serial port. In the spring of this year someone posted a Molex part number for the connector. Can any help me with this or any connector that fits? If you can please Email a reply to me @ jcardozo@polyslo.calpoly.edu Thanks. -- -- Jonathan Cardozo General Electric R & D Center cardozo@crd.ge.com "We bring good things to life"
madler@piglet.caltech.edu (Mark Adler) (10/22/90)
I have some information on connectors for the HP-48, but I have not found a
source yet. Here's the info ...
Mfr: DuPont Electronics
Specs: Connectors are part of the "Minitek System".
Description "Crimped-wire receptacle housing headers".
Holes are on 2mm (0.079 inch) centers.
Posts are 0.002 inch (0.05 mm) square.
Posts are 0.002 inch (0.05 mm
Parts: For each cable, you will need
1 ea #69305-004 Single-row housing, 4-pin header
4 ea #77138-001 Crimp terminals for 20-30 ga wire
Newwark couldn't even find them to order them. If anyone has better luck,
please let me know.
Mark Adler
madler@piglet.caltech.edu