dwk@mvaxcs1.cse.nau.edu (David Knapik) (01/30/91)
Does anyone out there have a Bode plotter for the 48? I have found a few for the 28s but they have been very difficult to convert. What I need is a program that will plot the phase and magnitude of a transfer function. Input the function a start and a stop frequency. If someone could direct me to the nearest ftp site, mail me or even post the file. Also, to all of those out there that are looking to make a cable to transfer data, I used an old keyboard cable. The connectors on the keyboard side are about the right size that fit onto the output connector of the HP. All I did was lined four up on a small piece of acrylic and glued them in place (superglue is a wonderful invention) I then cut off the other end and replaced it with a 9-pin connector. This works great. And since I already had a keyboard cable around, was inexpensive. Thanks for all your help, Dave...