abaumhau@udecc.engr.udayton.edu (Staff- Andrew M Baumhauer) (04/14/91)
I recently had a crash with MLDL that caused me to have to clear all memory. Since the memory was clear, I decided to try experimenting with the functions available after pressing ON-D. By pressing ON-D then y^x a cycling diagnostics test is performed. Strangely I got a failure message on one of the tests. I am not sure what test is being performed but the tests run in this order: SPD 194blahblah DISP The moving graphics display... IROM OK IRAM OK U_LB 20000 RAM1 OK RAM2 OK FAIL 00020 Cycle repeats.... I have a REV E and two 32K ram cards merged. If I free the card in port 2 and remove it the message is FAIL 00120. With both cards removed it is FAIL 001A With one card in port 2 I get FAIL 000A0. Does anyone know what the test is that my 48 is failing? Is this anything to be worried about? The calculator seems to behave normally but I don't want to be in the middle of something important and have it go! Andrew Baumhauer abaumhau@udecc.engr.udayton.edu Systems/Network Operator School of Engineering, University of Dayton