akcs.jrchaffer@hpcvbbs.UUCP (J. Richard Chaffer) (05/05/91)
I cannot get a large (98k) download to go past the 25th packet, using
Kermit, with both a HHP HP 128k ramcard AND a CMT 128 ramcard installed.
I tried b various measures, e including ressetting HP48, rebooting the
PC, etc etc. No help. When the CMT card was pulled, asll all was el
(sheesh - the terminal prog I am using has no correct p key for bakcspace
- please pardong my giberrish - I dO type & speck the language...)
Anyway, when the CMT card was pulled, all porce downloading proceeded OK
and when the card was reinserted and remerged, all was STILL ok, what is
going on?? Are their there bbb buhgggs bugs bbgufs in these things???
Helps help?
any others see this por prob?
please leave a message here or call me -
Dick Chaffer
days 206-773-5433
eves 206-883-7115
thannxstevev@greylady.uoregon.edu (Steve VanDevender) (05/08/91)
I have found that downloads to the HP-48 at 9600 baud will frequently fail, usually early on, when the memory is sufficiently full. Downloading to an empty calculator usually works fine, but after something like 30K I have to back up to 4800 baud before things will work reliably again. I have a 128K HP RAM card in port 1, merged. -- Steve VanDevender stevev@greylady.uoregon.edu "Bipedalism--an unrecognized disease affecting over 99% of the population. Symptoms include lack of traffic sense, slow rate of travel, and the classic, easily recognized behavior known as walking."