s851736@gecko.rmit.oz (Robert Krohn) (06/06/88)
Im designing an Interface card for the NuBus to connect to a card cage of other devices. The card will contain a FIFO, Serial // converter, Encoder/ Decoder chip etc. It is a slave board to the Mac II. The first prototype won't have any slot Resources etc. What is the minimum amount of information I need in the Declaration ROM. Especially what should the BoardId be. Are there any other *must have* pieces of info. Thanks in advance, Rob. ============================================================================= = = = Robert Krohn RMIT Comm & Elec Eng, Melbourne, Australia. = = = = ACSnet: s851736@gecko UUCP: ...!uunet!munnari!gecko.rmit.oz!s851736 = = CSNET: s851736@gecko.rmit.oz ARPA: s851736@gecko.rmit.oz@uunet.uu.net = = BITNET: s851736@gecko.rmit.oz@CSNET-RELAY = = = = 'My God, it's Full of Stars' = = = =============================================================================