mmccann@hubcap.UUCP (Mike McCann) (12/15/88)
I have a problem and need your help. We have a Mac set up here with a hard drive and a LaserWriterPlus connected to it. Several people have been using this machine to edit there papers on instead of using it only for printing. It stop this, we want to remove the keyboard. The only problem I have is that ALOT of people write their paper using the ImageWriter drivers and then expect it to print on the LaserWriter perfectly. What I would like to do is remove the keyboard from the machine and put two LaserWriter drivers (5.0) on the system instead of just one. One would be setup for documents written with the LaserWriter driver and the other for ImageWriter. My question (finally) is, can the LaserWriter driver be patched so that it prints the document as written with the ImageWriter driver without the use of the keyboard (reduction, page setup, etc)??? If so, how would I do it (I have ResEdit and know how to use it [basicly] but dont know what in the code to change). Thanks in advance for the help, -- Mike McCann Internet = mmccann@hubcap.clemson.edu Poole Computer Center (Box P-11) UUCP = gatech!hubcap!mmccann Clemson University Bitnet = mmccann@clemson.bitnet Clemson, S.C. 29634