[net.micro] S100 ST506 Controller

boykin@datagen.UUCP (08/31/83)

I am looking for recomendations for an S100 ST-506 controller.
The controller should be DMA and capable of operating at a minimum
of 8MHz (and preferably 10 or 12) on an 8086 system.

I've looked into the Morrow HDCDMA board, however the board is
only tested by Morrow to 4MHz and they don't want to hear about
any problems running it on non-morrow systems.
SCP (Seattle Computer Products) has chosen the Morrow board for their
own system, but they are reporting very high failure rates.

Any comments/suggestions/reccomendations on other boards would
be appreciated.

I'll send a summary of the replies I get to anyone who is interested
and/or post it to the net if the interest is great enough.

Joe Boykin
...decvax!ittvax!datagen!boykin
...allegra!datagen!boykin