SHahn@SUMEX-AIM.ARPA (02/02/84)
From: Sam Hahn <SHahn@SUMEX-AIM.ARPA> Thank you for your review of the Kaypro-10. -- sam -------
jwd@ihu1g.UUCP (02/05/84)
1 Mel Haas asked about reviews of some cheap systems. I have a Kaypro-10 that i bought last august. I am very pleased with it, in general. I have added only a modem and am using a TI745 terminal as a serial printer. I bought C/80 from the software toolworks, and am much happier with the system than I was. The machine comes with CP/M 2.2, and a lot of software. I have the perfect series (Perfect Writer, Perfect Calc, and Perfect Filer), as well as Wordstar and a compiled basic, SBASIC. I think PW (Perfect Writer) is very good as an editor, It is a simplified/cut down version of emacs. I miss the ability to pass command lines to the system-- Oddly enough, I played with a Kaypro 4 last summer and on that system there was an undocumented feature in Perfect Writer ^X^E passed commands to CP/M. That is not present in the current version. I am less satisfied with the text formatting capabilities of PW, but I have been used to the tools available at the labs on UNIX(TM) for several years, and am spoiled, I guess. (One has to hope there is a difference between a VAX and a Z80!) I have been able to do most of what I wanted with the system -- I am a visiting professor at Jackson State-- namely preparing exams and course outlines. The major objection I have is that the documentation says that style parameters, such as line spacing, can only come at the beginning of the file. Experimentation shows that it realy is not so restricted, but I assume there is some restriction that I haven't found. PW has an ENUMERATE style, used to successively number lists, much like some of the list macros for NROFF, but it appears to number only from the natural numbers, 1,2,3,... Being able to use letters and/or roman numerals would be a useful extension. Perfect Calc is a spreadsheet that certainly meets my needs, which haven't been much, yet. Perfect Filer is a simple database system. Actually, it is rather too limited for my purposes, but I guess one can't complain too loudly about free software. It appears it does well at managing mailing lists and similar files. I wanted to use it to keep notes about courses and lectures, and similar items. It is definately not suited for such uses, as it is screen oriented, only one screen to an entry, and each screen is divided into fields, with a field being at most one line. Because of this, any multi-line notes must be treated as a number of feilds, each of which has a unique name. I also find the menu driven aspect of it rather bothersome. C/80 suits my needs rather well. It is inexpensive ($49.95), relatively fast, and does a good job. It does not support floats/longs, but I miss only the longs. (there is a C/80 Mathpack available that adds those features) What I really miss is typedefs and macros with arguments. So far, I have written a quicksort program and a few of my favorite UNIX utilities, wc and cat among them. I hope this article can be read. The termcap I'm using doesn't really work well with emacs/gmacs, whichever editer I got put in to post this, so I can't always read what I'm typing. (Further complicated by the fact that I'm using a versio of modem7 ) I also bought and use Computer Chef, and the Adventure from Software Toolworks. I am pleased with both. CP/M 2.2 on the kaypro10 is ok, I guess, not compared to UNIX, but... My biggest complaint is the way the user areas isolate you from files. Until I got my latest issue of PROFILES, the Kaypro user's magazine, I was stuck copying the swap file PW uses into each user area so I could use the editor. I didn't bother with the Help file, and Wordstar I just left in one area. (I user Wordstar for most of my text formatting, principly because, as Jerry Pournelle noted in BYTE, the What-you-see-is-what-you-get capability saves stopping and printing, then fixing, then printing, etc.. Particularly when you can't do anything else while waiting for the printer.) I don't move the kaypro around much, leaving it on my desk at home, but have had no trouble when I did move it. I have seen one that was moved after turning it off without running the SAFETY program. Head crash wiped the system tracks. Perhaps the biggest fault of the kaypro is not tying the SAFETY program to some sort of automatic system. Not being a hardware jock, it seems it would not be too difficult to build in a loss-of-power interrupt (like the PDP11s?) and use that to retract the heads. I understand power is needed to do that, but a capacitor and/or the momentum in the rotation of the hard disk itself might be available... All in all, I'm glad I got the 10 -- The speed and space of the 10M hard disk makes a big difference form the II. If one is used to micros, instead of VAXEN and 3Bs, I suppose the cheaper machines are nice, but I feel I got my $2800 worth. I figure one of these days I'll buy a clock to put in it, and maybe one of the co-power boards. First a printer. All I need is money. I hope this has some of the info you were looking for Mel. I also would like to hear more about what others have done with kaypros. And perhaps see some comments on changes to the system software to make it more useful. I am waiting for the kaypro10 "Tinker kit", which includes a listing of the BIOS, so I can do some of my own work. Joe Davison ihu1g!jwd a