tomwest@gpu.utcs.toronto.edu (Tom West) (03/29/88)
Has anyone tried using Telebit Trailblazer+'s with Data General Machines under AOS/VS? We have managed to do reasonably well with the following register changes: S45=255 (Remote Enable) S51=5 (19.2k) S52=2 (Drop line on no DTR) S53=2 (DCD & DSR interpretation) S54=1 (Pass break signals) S58=0 (No flow control) S66=1 (lock interface) On the terminal TB+, we have S51=255 (Autospeed) s66=1 (Lock interface) S110=1 (Compress) S111=0 (No kermit) Unfortunately, there seems to be some difficulty getting the TB's to respond to ctrl-C ctrl-A (AOS/VS's break signal) and immediately. It tends to require some repetition. Anybody have some way of getting better response to this? (We have Firmware 4.00 on all the TB+'s.) -- Tom West BITNET: tomwest@utorgpu.bitnet, tomwest@gpu.utcs.utoronto Internet: tomwest@gpu.utcs.toronto.edu UUCP: tomwest@utgpu utzoo, yetti, harpo, mnetor \ cbosgd, deepthot, utoronto - !utgpu!tomwest ihnp4, lsuc, sfmin, vnr-vpa /