[comp.sys.zenith] Z386/20 speed

monk@cassandra.math.udel.edu (Peter Monk) (10/31/90)

While installing an 80387 in a 386/20 I noticed there is a jumper to set
the clock
speed from 20M->25M.  If I change the jumper will I have a 386/25?

(On the subject of complaints against Zenith.  I have had an old Z100
for about 6 years
with NO PROBLEMS.  I love the old machine.... but had to upgrade because
of lack of
software.  I hope the new Z is as good as the old one.)

Thanks.
Peter