[comp.sys.zenith] Disabling Floppy Drive Contr. in Z-151

tidedu@mars.lerc.nasa.gov (William T. Dedula) (05/06/91)

Hello All;
I'd like to know if it is possible to disable the Floppy 
Drive Controller card which came with the Z-151 ? And if so, 
How would I go about doing it ??? 

I recently bought a 3.5" drive controller card and am now 
running all drives off that although as a result of the original
floppy controller still enabled, the drive designations are 
messed up. The 5-1/4" is Drive A, the 3-1/2" is drive "C", and 
the 20 MB Hard Disk is Drive "D". We would perfer to have
the 5-1/4", Drive "A", the 3-1/2", Drive "B", and the 20MB 
Hard Disk, Drive "C", and NO drive "D". Any ideas ??? 

Thank you VERY Much !!!

Tim

W. Tim Dedula                        Internet: 
N.A.S.A. Lewis Research Center       tdedula@nasamail.nasa.gov
Mail Stop 77-3                       tidedu@mars.lerc.nasa.gov
21000 BrookPark Road                 aa252@cleveland.freenet.edu
Cleveland, Ohio 44135
Phone (216) 433-3668

The National Aeronautics and Space Administration: Science and
Technology ... for the Benefit of ALL Mankind !!!