phil@amd70.UUCP (Phil Ngai) (03/07/84)
Does anyone have suggestions on how to get the cursor on an H-19 to stop
blinking? There is a switch which controls whether the cursor is an underline
or a block, but both of them blink.
The data sheet on the CRT controller (a Hitachi 6845) indicates there is
a register which can be programmed for the cursor you want, but that is
done by the H19's firmware.
I guess what I want is a listing for the firmware so I can copy the PROM
into an EPROM and change the bits that initialize the 6845's cursor.
If anyone has it, I'd sure appreciate a copy.
--
Phil Ngai (408) 988-7777 {ucbvax,decwrl,ihnp4,allegra,intelca}!amd70!phil