cowleym@magill.sacae.edu.au (04/12/91)
Hi again, Here is an addendum to my last post: > We are running NEWS B v2.11.19 on an Ultrix station running 4.2 BSD > and NNTP v1.5.11, using NNTPXMIT to receive news and send news to VMS machines > at our other sites. > > (in NEWS/src/Makefile) > LIBDIR=/usr/new/lib/news node /dev/rz1g > SPOOLDIR=/usr/spool/news > BATCHDIR=/usr/spool/batch > ... > Now, we are still receiving news and sending to our other sites, BUT, > copious log information is still going to the old places: > ie /usr/new/lib/news/LOG and /usr/new/lib/news/ERRLOG, > instead of to the new directory /usr/local/lib/news. > > I did make the changes in localize.sh I've just re-installed news (it's version 2.11.19) and the same problem has re-occurred. i.e. All the files are put into the new directory: /usr/local/lib/news But still the following files remain active in the old directory: active, log, history.pag, history, history.dir, errlog in /usr/new/lib/news We use nntp to get news from our feeder site and to xmit to sites connected to us, so I installed news first, then install with NNTP defined. Can you think of any suggestions? MArgaret.