keith@uport.UUCP (Keith Hankin) (07/23/88)
The following terminfo should work fine with Microport System V/386
Version 2.2 for the console. Just put everything between the '*'ed lines
in a file and type "tic <file>", where <file> is the file name.
***********************************************************************
AT386|at386|at/386 console,
am, xon,
cols#80, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=\b,
cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
ind=\n, invis=\E[8m, kbs=\b, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
kf8=\EOW, kf9=\EOX, khome=\E[H,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmso=\E[m,
rmul=\E[m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
sgr0=\E[0m, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
vpa=\E[%p1%{1}%+%dd,
***********************************************************************
--
Keith Hankin keith@uport
Microport Systems