lee@cimcor.mn.org (Lee from Minnow) (09/21/88)
Modem problem with microport I have been running my Sperry IT with microport Unix for a couple of years now with only the 'standard problems' . Lately, my modem fried and I bought a prometheus 2400 baud internal. Everything works without flaw in DOS but under microport I have problems. When I start a uucp xfer or call out using cu all seems well. The data xfer (or the cu session) works fine. The problem comes when the modem hangs up. About fifteen seconds after hangup the system goes crazy. Dsipaly lines from other console sessions start showing up on the current console screen. ie. display lines from virtual screen 2 appear in the middle of the virtual screen currently on display, say screen 4. About 5 seconds later the system gets a double tss fault and the machine reboots. Anyone had a problem like this? Anyone have ANY ideas? Calling microport is no help. They dismiss the whole thing as a 'hardware problem'. (THANKS ALOT FOR YOUR INDEPTH HELP) I'll try anything at this point!!!! Thanks in advance Gene W. Lee unisys (612) 635-3993 lee@minnow.sp.unisys.com