karl@ddsw1.MCS.COM (Karl Denninger) (12/07/88)
Good morning! Question for those of you out there -- has anyone else seen the following: A user "dials back in" from one port to another on a SV/AT machine and runs a largish software package. Anywhere from a few seconds to a half-hour later, the machine panics with a double-panic fault. OTHER software (vi, etc) do not "cause" the panic. Configuration is 2 drives (ST412), in a 10 Mhz AT compatible with an ARNET Smart-8 board, running SV/AT. In addition, executing the program from either the console or a dialup operates normally, and does not panic. I've personally called the machine in question and worked for over an hour in the package; no problem at all. The problem exists on SV/AT 2.2, 2.3, and now I've had it reported on 2.4. We consider it relatively low priority since "dialing back" is not a normal mode of operation, but still.... it appears the panic monsters are still with us! Anyone else with identical or similar problems? -- Karl Denninger (karl@ddsw1.MCS.COM, ddsw1!karl) Data: [+1 312 566-8912], Voice: [+1 312 566-8910] Macro Computer Solutions, Inc. "Quality solutions at a fair price"