bhawkins%umass-cs.csnet@csnet-relay.arpa (03/27/84)
From: Bruce Hawkins <bhawkins%umass-cs.csnet@csnet-relay.arpa> My research group is seeking information about MS DOS editors, with some interest in CP/M. At the moment I am using Final Word under CP/M on a DEC Rainbow. If I cannot find anything better, I will purchase that for MS DOS. I am very happy with the multiple buffering and windowing capability, and reasonably happy with the commands. All your work is saved on the disk so that you cannot lose much in the event of a power failure, a major plus. I would very much like to have the capability to define macros, and it would be convenient to be able to reassign keys directly from the editor. The other problem with Final Word is that it sometimes gets its buffer pointer mixed up unless your are careful about not leaving multiple buffers around when you exit. Cleaning up when you leave is a minor nuisance, but can be put up with. I have looked at the VEDIT manual, don't like its philosophy, and see that you can only edit in the main buffer. So, guys, what is there out there that has multiple buffering with the ability to edit equally well in any buffer, at least two windows, reassignable keys (at least at configuration time and preferably at edit time) that understand the VT-102 keyboard, preserves a record of current actions on the disk, and has macro capability? And preferably it shouldn't cost an arm and a leg. I will summarize replies to the net. Bruce Hawkins Smith College umass-cs@csnet-relay