billd@celerity.UUCP (Bill Davidson) (01/17/89)
We are currently using an 8Mhz 286 PC with an RLL disk, 6 port serial
card and 1/4" tape, all made by Bell Tech. It is getting inadequate
for our needs and it's always been slightly flaky. We would like
to upgrade to a 12 or 16 Mhz system with a minimum of 4Meg and around
200Meg of disk and still have a 6 port serial card and 1/4" tape.
We need to stay with System V/286 for development reasons. I would
like to hear from people who have found good hardware combinations
that featured all of this. I'd also be interested in ethernet
hardware/software.
--Bill Davidson
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
....!{ucsd|sdcsvax}!celerity!billd