[comp.unix.microport] CARTRIDGE DRIVES

misha@bud.UUCP (Michael Umansky) (04/26/89)

Newsgroups: comp.periphs
References: <355@icc.COM> <4978@tekgvs.LABS.TEK.COM>
Reply-To: misha@bud.UUCP (Michael Umansky)
Organization: Arete Systems, Inc. San Jose, CA.

In article <4978@tekgvs.LABS.TEK.COM> keithe@tekgvs.LABS.TEK.COM (Keith Ericson) writes:
>In article <355@icc.COM> ajm@ICC.COM (Al Marmora) writes:
>>I've been trying to locate, with little success, dealers and/or distributors
>>for Wangtek tape drives and controllers.  Any information will be greatly
>>appreciated.
>>
>>Thanks in advance.
>>
>	Eltech Research, Inc.
>I've bought 60 Meg QIC-02 systems for appx 800-900 dollars I think it
>was.
I have a Wangtek 60Mb drive with Archive SC499K (half card) XT/AT controller
for $400.  Or I can substitute a real QIC-02 interface instead of
the Archive XT/AT version of QIC-02.  I also have an Archive 60Mb drive
with the Archive SC499K controller for $400.  Or I can also substitute
a real QIC-02 interface instead of the XT/AT version.  Add $100 to each
setup if you want both controllers.  Both drives are half-height if
used with XT/AT controller and full-height if used with real QIC-02.
misha
-- 
NAME:	Michael Umansky (sun!aeras!foxy!misha)
WORK:	Arix Corp.;  821 Fox Lane;  San Jose, CA  95131
HOME:	4331 Lincoln Way; San Francisco, CA  94122
PHONE:	(408) 922-1751 (work); (415) 564-3921 (home)