rk@bigbroth.UUCP (rohan kelley) (07/04/89)
This is an attempted uucp initiated on taesat requesting a file on bigbroth. It looks like the machines connect, login is successful, then agree on g protocol, a TM.xxx file is created on taesat, then something happens -- what? The problem is apparently on taesat. taesat an AT PC runs microport 286 version(?)5.2.1 (pre HDB) bigbroth is a 3b2/400 runs Sys V 3.1. On taesat bigbroth is in L.sys On bigbroth taesat is in Systems and Permissions On taesat, there is also a truncated entry for bigbro since the uucp (prior to HDB) only handles 6 characters for a system name. The problem is that taesat seems unable to deal internally with the file after bigbroth!uucp has transmitted it to taesat. There is the same type of failure whether the transfer is initiated on bigbroth or on taesat. Any idea what causes the failure? Thanx for any suggestions. Several of the relevant debugging and tracing files are copied below from both machines. ======================================================================= Rohan Kelley -- UNIleX Systems, Inc. (Systems and software for lawyers) UUCP: ...{gatech!uflorida,ucf-cs}!novavax!bigbroth!rk (office) novavax!mdlbrotr!rk (home) ATTmail: attmail!bigbroth!rk 3365 Galt Ocean Drive, Ft. Lauderdale, FL 33308 Phone: (305) 563-1504 "Go first class or your heirs will" -somebodyelse ======================================================================= #===call originates bigbroth --> taesat #===from bigbroth uulog -staesat==== uucp taesat (7/3-7:12:59,3080,0) SUCCEEDED (call to taesat ) uucp taesat (7/3-7:13:11,3080,0) OK (startup) rk taesat taesatN484c (7/3-7:13:12,3080,0) REQUEST (bigbroth!/usr/spool/uucppublic/taesat/fetchfile --> taesat!/usr/spool/uucppublic/receive/bigbroth/ (rk)) rk taesat taesatN484c (7/3-7:14:55,3080,1) FAILED (conversation complete) #==================== This is /usr/spool/uucp/LOGFILE on taesat. #==================== bigbro!uucp (7/3-7:14:01) (C,924,0) OK (startup) bigbro!uucp (7/3-7:14:02) (C,924,0) REQUESTED (S /usr/spool/uucppublic/taesat/fetchfile /usr/spool/uucppublic/receive/bigbroth/ rk) bigbro!rk (7/3-7:14:04) (C,924,0) temp file created (/usr/spool/uucp/TM.00924.000) bigbro!rk (7/3-7:14:04) (C,924,0) Temp file stored (/usr/spool/uucp/TM.00924.000) bigbro!rk (7/3-7:15:45) (C,924,1) IN SEND/SLAVE MODE (INPUT FAILURE) #=========== Mail report on taesat to uucp on transfer requests. #============ From root Sun Jul 2 23:45 EDT 1989 Subject: uucp requests Status: RO uucp taesat (7/2-22:56:03,28714,0) REMOTE REQUESTED (bigbroth!/usr/spool/uucppublic/taesat/sendfile --> taesat!/usr/spool/uucppublic/ (root)) # It looks like the transfer succeeded # #========================= This is the /usr/spool/uucp/AUDIT file on taesat (it records requests from a foreign system loging in. #========================= chmod: can't change /dev/ttyM1 shio - chmod 600 /dev/ttyM1 status 256 Rmtname bigbro, Role SLAVE, Ifn - 0, Loginuser - bigbroth wmesg 'P'gx rmesg - 'U' imsg >\ 20 Ug\ 0 got Ug send 73 rec h->cntl 73 send 61 state - 1 rec h->cntl 61 send 53 state - 3 rec h->cntl 53 state - 10 Proto started g Protocol Ug *** TOP *** - role=0, setline - X rmesg - 'send 41 rec h->cntl 177620 send 42 got S /usr/spool/uucppublic/t PROCESS: msg - S /usr/spool/uucppublic/taesat/fetchfile /usr/spool/uucppublic/receive/bigbroth/ rk -dCmn D.taesa484c0e3 777 rk SNDFILE: msg - S SLAVE - filename: /usr/spool/uucppublic/receive/bigbroth/ chkpth ok Rmtname - bigbro wmesg 'S'Y send 177612 rec h->cntl 41 state - 10 rec h->cntl 177631 send 43 rec h->cntl 75 bad header 23,h->ccntl 57 rec h->cntl 177651 rec h->cntl 177631 rec h->cntl 177631 rec h->cntl 177631 rec h->cntl 177631 rec h->cntl 177631 rec h->cntl 177631 rec h->cntl 177631 rec h->cntl 177631 rec h->cntl 177631 rec h->cntl 177631 rec h->cntl 75 bad header 23,h->ccntl 57 rec h->cntl 177651 chmod: can't change /dev/ttyM1 rec h->cntl 10 state - 6000 cntrl - -1 TM_cnt: 1 TM file unlinked: /usr/spool/uucp/TM.00924.000 send OO -1,imsg >\ 20 \ 11 \242 \252 \ 10 \ 11 \ 20 OOOOOO\ 0 ret restline - 0 shio - chmod 666 /dev/ttyM1 status 256 exit code 0 #================= Here is more LOGFILE from taesat where I qued a file from transfer from bigbroth --> taesat. #================= bigbro!uucp (7/3-11:56:43) (C,1249,0) SUCCEEDED (call to bigbro ) bigbro!uucp (7/3-11:56:53) (C,1249,0) OK (startup) bigbro!root (7/3-11:56:53) (C,1249,0) REQUEST (S /usr/rk/a /usr/spool/uucppublic/taesat root) bigbro!root (7/3-11:58:34) (C,1249,1) BAD READ (expected 'S' got FAIL) bigbro!root (7/3-11:58:34) (C,1249,1) FAILED (conversation complete)