[unix-pc.uucp] Problem with direct uucp connection

kak@hico2.UUCP (Kris A. Kugel) (08/10/90)

I am trying to set up a direct link between two 3b1's,
with the caller calling out though expansion port 1 to 
tty000 on the "host".  hico2 is running default 3.51m uucp,
hico3 hasn't been patched to "m" yet.

When I try connecting with cu -l tty001, the connection seems to work perfect.
I can log in with no problems.

but when I try to connect using uucico, I get this result (slightly edited):
	(output from uucico -r1 -x9)

finds called
getto called
call: no. tty001 for sys hico3 linit:  got line -  
 . . .
 got line - DIR tty001 0 9600 
SPEED 9600
LINE 9600
ndirect 1
direct tty001
direct 9600
fixline - speed= 13
 enter us_sst, status is : 05
s.sysname :   shop
. . .
s.sysname :  hico3
 enter ub_sst, status is : 5
Rmtname: hico3
exit code 0

 * * * * * * * * * * * * * * * * * * * *

 I have a suspecion that it's some kinda hardware
 problem, but have no idea how to check this out.
 (at least, not without a breakout box)

 Does anybody out there have a clue about what's going on here?

                               Kris A. Kugel
                              (201) 842-2707
       {uunet,att,rutgers}!westmark!hico2!kak  <--well-connected
		    {tsdiag,ka2qhd}!hico2!kak  <--frequent
{ssbn,zorch,zinn,ditka,daver,attdso}!hico2!kak <--semi-daily