morgan@ms.uky.edu (Wes Morgan) (03/23/91)
This is really, really strange. I installed the DMD Core Utilities
on a 3b2/600. When I tried to reboot after installing, I received
the dreaded DIAGNOSTICS FAILED. I booted from firmware, and every-
thing seemed fine. I then began using a 5620 with 'layers'. No problems
were noted.
Now it gets weird. I finally got a clean reboot (DIAGNOSTICS PASSED).
The 3b2 then booted from /etc/system, and the changes made in the in-
stallation of the DMD utilities took effect.
Now 'layers' won't work.......it puts up the green background, and
then promptly hangs.
Suggestions?
--
morgan@ms.uky.edu |Wes Morgan, not speaking for| ....!ukma!ukecc!morgan
morgan@engr.uky.edu |the University of Kentucky's| morgan%engr.uky.edu@UKCC
morgan@ie.pa.uky.edu |Engineering Computing Center| morgan@wuarchive.wustl.edu
Curator of the benchmark archives at wuarchive.wustl.edu <128.252.135.4>