cem@intelca.UUCP (Chuck McManis) (06/22/84)
The Z80 family Serial Communications Chip or SCC or Z8530 or Intel 82530,
has 2 baud rate generators and two independent channels on chip. They
are easy to set up and don't need "phase 2". As far as I know there is
not a phase 2 on Z80's except on maybe old S100 systems.
--
-- Chuck - - - D I S C L A I M E R - - -
{ihnp4,fortune}!Dual\ All opinions expressed herein are my
{proper,idi}-> !intelca!cem own and not those of my employer, my
{ucbvax,hao}!hplabs/ friends, or my avacado plant. :-}
ARPAnet : "hplabs!intelca!cem"@Berkeleyagjenkin@west44.UUCP (Alun Jenkins) (06/27/84)
<eat it, eat it, if it gets cold re-heat it> Does anyone know of an ACIA type device available to suit Z80 systems without too much bodging . It seems that the SY6851 or equivalent will not talk to a Z80 due to the lack of Phase 2! . Any help would be apprieciated. Also manufacturer etc. Alun Jenkins ...ukc!west44!agjenkins