SERRER@nrcm3.nrc.ca (Martin Serrer - Systems Manager) (07/14/89)
Hello out there... Does any one out there have a CEDIT like tool which reports the RGB values in HEX rather than in base 10. (for cpack(); ) My brain doesn't work the conversions very fast. Or is there an option on CEDIT which I am missing?? Also is there a RPN calculator available which uses the keypad or any calculator which uses the keypad??? Question... Why does 4Sight V1.2 stop working after 3-4 hours of use. The windows lock up one by one. The fix is to log out and log back in (a pain). Sometimes a reboot is the only thing that will save it.(a much bigger pain) The only extra software running on the system is 4DDN (DECnet endnode). The system is currently being used only to edit/compile/run small 'real rate' graphics programs (no major load on the system or so I would have thought.) This is all on a 4D50/GT with 8Meg +------------------------------------------------------------------------------+ | Martin Serrer - Systems Munger | | | +---+ /----\ | | Systems Laboratory, Bldg. M-3 RM.118 | |\ | | | | \ | | Division of Mechanical Engineering | | \ | | | | | | National Research Council of Canada | | \ | |---+ | | | Ottawa, Ontario, Canada K1A-0R6 | | \ | | \ | | | serrer@syslab.nrc.ca (BITNET) | | \| | \ | / | | (613) 993-9442 (Bell) | | | | \ \----/ | +------------------------------------------------------------------------------+ + Software Rusts... Rust never Sleeps... + +------------------------------------------------------------------------------+