sam@uxe.cso.uiuc.edu (11/10/89)
actually, that is the VT100 "PF4" key I'm trying to locate in "xterm".
bernie@umbc5.umbc.edu (Bernard J. Duffy) (11/15/89)
In article <223000004@uxe.cso.uiuc.edu> sam@uxe.cso.uiuc.edu writes: > >RE: xterm under irix 3.2 > >In the meantime, let me ask if anyone can tell me >where one finds the key mapping for the VT100 "do" >key (so important to the eve editor, etc.) when >using "xterm" under Irix 3.2 on the SGI? Coming from a VAX/VMS environment with may faculty users in the same boat, I had a need to find the EDT keypad. If you send the terminal an <esc>= (I believe since I can't tested in with the hp workstation I'm using now), the keypad should be enable to be the DEC VT100 type. The numbered buttons as well as the . (period) and enter are direct maps. The PF buttons are the 4 function buttons labeled F9-F12 (the set of 4 right above the del-back space button of the main keyboard). This is documented, but I can't remember where (probably the Owner's Guide or the man page for wsh). I'd normally spend more time of making this message more correct, but can't right now and I thought the info/hint was more important. for your enjoyment, Bernie Bernie Duffy Systems Programmer II | Bitnet : BERNIE@UMBC2 Academic Computing - L005e | Internet : BERNIE@UMBC2.UMBC.EDU Univ. of Maryland, Baltimore County | UUCP : ...!uunet!umbc3!bernie Baltimore, MD 21228 (U.S.A.) | W: (301) 455-3231 H: (301) 744-2954