sam@ux1.cso.uiuc.edu (06/01/90)
Is there a Tektronix emulator for SGI's?
blbates@AERO4.LARC.NASA.GOV ("Brent L. Bates AAD/TAB MS361 x42854") (06/01/90)
On the 3000's there is a command called wsiris, which does an ok job. I have used it to connect to remote machines through a RS232 port. I suppose to work through the ethernet, but I haven't managed to get it to work there. On the 4D's I think you can use X windows to get an emulator. I haven't had the need to try it on a 4D so I haven't checked into it. -- Brent L. Bates NASA-Langley Research Center M.S. 361 Hampton, Virginia 23665-5225 (804) 864-2854 E-mail: blbates@aero4.larc.nasa.gov or blbates@aero2.larc.nasa.gov
gmorlock@iristip.UUCP (Gregory L. Morlock) (06/07/90)
In article <19400002@ux1.cso.uiuc.edu> sam@ux1.cso.uiuc.edu writes: > >Is there a Tektronix emulator for SGI's? Yes. Grafpoint, Corp; 1485 Saratoga Ave; San Jose, CA 95129-4934 makes a product called T-Graf which emulates several different Tek models and will run on SGI machines. I haven't tried the SGI version, but the T-graf for PC's works pretty well.